- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Lead Engineer Resume Samples
No results found
Candidate Info
years in workforce
years at this job
Lead Engineer
Lead engineer on the [company name] (Multimedia Message Service Gateway) which delivers the multimedia messages to the mobile handsets. Used: Jboss 4.x, Oracle, Ant.
- Implemented the pass by reference feature, which reduced bandwidth of the client request and at same time maintain flexibility of MM7.
- Implemented the integration with multiple MMSCs.
- Cleaned up the [company name] legacy code base, by removing the dead business logic, by 20%.
- Increased test coverage on the [company name] code base by 30%.
- Wrote a new MM7 library to replace deprecated Openwave library.
- Hand-on diagnosed on production issues and resolved them as quickly as possible.
Candidate Info
years in workforce
years at this job
Electrical Engineering
Research
Lead Engineer
Lead nuclear control engineer for the FY 11 Super Dry Docking of the USS RONALD REAGAN (CVN 76)
- Coordinated work with the various divisions of the ship, the test engineering division, and production
- Managed resources and created required manning plan. Managed up to 15 engineers at a time.
- Performed major upgrade of Reactor I&C equipment in 20% less man days than the previous project (CVN 68 FY10)
- Interacted with high ranking individuals ranging from NAVSEA representatives to the ships CO.
- Prioritized and assigned work to engineers to support project schedule
Candidate Info
years in workforce
years at this job
Physics
Lead Engineer
Responsible for design and integration of all Spall Liner required for the Ground Combat Vehicle. Reviewed Contract Data Requirement List (CDRL), evaluated requirements and developed requirement verification plan. Identified risks/issues/opportunities (RIO) and associated mitigation plans and participated in RIO boards. Supported development, update, review, and issuing of the Design Requirements Compliance Metrics (DRCM). Performed trade-off studies and evaluated/ recommended design solution using Design Decision Memo (DDM). Supported Interface Control Working Group in development of interface control document (ICD) and supported Reliability Group in Failure Mode, Effects and Criticality Analysis (FMECA). Participated in development of Automotive Systems Architecture with Architecture Group. Independently managed budget, schedule, and materials tracking. Designed complete spall liner installation and developed a unique integration solution. Planned testing procedures and coordinated test activities.
- Successfully executed all planned test events on schedule and under budget.
- Presented test reports consisting of compiled and analyzed data to senior management.
- Collaborated with the customer and test range management team to evaluate and identify spall liner requirement issues. Presented requirement issues and recommendations to upper management.
- Implemented changes to standard test assets design resulting in manufacturing cost savings of 70% for Titanium assets and 40% for Steel assets.
Candidate Info
years in workforce
years at this job
Bachelor of Arts
Technical Lead Engineer
Developed, coded, tested, and implemented effective software solutions focused on usability and scalability of interfaces for the M3 AMHS product.
- Technical Lead for software development of AMHS V2.3.6, which transitioned AMHS into a Client/Server architecture, facilitating the conversion into a Web-based product consisting of Web programming methods, Perl, JavaScript, HTML, and CSS.
- Designed solution to handle all aspects of real-time message profiling with the creation of new Profile Management (PM) CSC.
- Created and implemented new Message Assembly (MA) CSC to address all aspects of AUTODIN sectioned messages.
- Wrote scripts to rebuild corrupted search engine message databases, monitor real-time system performance, and ensure 100% message accountability on both primary and backup servers.
- Applied the appropriate standards, processes, procedures, and tools throughout the development life cycle.
- Optimized the value and performance of the team through mentoring and team-oriented planning initiatives.
Candidate Info
years in workforce
years at this job
Mechanical Engineering
Lead Engineer - Product Approval (pa)
Sole responsibility for ensuring that all product design changes including new designs as well as cost and quality improvements on all built-in refrigerators (BIR), top mount refrigerators, Model 50 ice makers and Gladiator garage products achieved or exceeded company as well as outside agency requirements prior to production
- Studied DFMEAs, simulations, product designs and previous test results and reviewed changes with lab engineers, electronics PA engineer and codes/safety engineer to develop lab test plans to confirm product performance, reliability, robustness, safety and code certification
- Issued over 625 PA test plans. Approved over 475 new models and component changes
- Served as refrigeration representative on global product approval database development and implementation team. Trained all refrigeration personnel on database usage
- Documented and pursued closure of over 30 corrective action plans for existing design issues
- Reviewed and provided feedback on all new and revised product test specifications. Served as product approval representative to specification steering committee
- Trained product approval personnel and supplier of Gladiator garage products in China on test procedures and approval criteria
Candidate Info
years in workforce
years at this job
Nuclear Engineering
Radiological Sciences
Lead Engineer
Accountable for Fidelity's Global Enterprise IP Management (IPAM) architecture, engineering, and security. Network critical technology has half a million IP's under management, over 200 active administrators and spans North America, the UK, and South East Asia.
- Led a $1.5M cross-team effort to replace the entire DNS Infrastructure with appliances. After an extensive RFI the appliances were delivered for one-third the initial budget including maintenance with a less than two-year ROI.
- Directed team in all phases of operational, project management and technical/security assessments and deployments. Managed final approval on hundreds of changes a month.
- Developed and Implemented process improvement methodology for software upgrades. Reduced implementation time by several weeks, increased Business Unit communication channels, obviated the need for vendor professional services, and allowed for the last two major upgrades to be completely successful and problem free.
- Led a multi-year effort to bring Fidelity's 2500 Internet Domains under one vendor for management. Providing one channel for all of Fidelity's businesses an efficient and cost effective means to not only register their key domains but protect them from unintended expiry and brand infringement.
- Selected by Global Network Services (GNS) management to represent the team at Enterprise level emerging technology forums including click to compute (C2C) and Virtual Datacenter (VDC). Contributed to the Security Implementation and Design of these projects.
- One of six engineers selected for a top security initiative to mitigate Bot-net based DDoS attacks. Authored Fidelity's white paper on DNS based DDoS attacks.
Candidate Info
years in workforce
years at this job
Engineering
Engineering
Lead Engineer
Project Management
- Led a team of four engineers
- Collaborated with engineering teams from Spirit AeroSystems and CFM to generate NASTRAN finite element models which simulate the 737 MAX propulsion configuration
- Ran tens of thousands of airplane flight conditions through structural finite element analysis to produce internal load distributions. Wrote software to filter, sort, and organize the results so they were easily understood by the downstream engineers
- Led a multi company team to find an analytical solution high airplane dynamic windmilling loads which were impacting the program.
- Optimized the processes, reducing man hours and flow time by 60%. Received an award from program leadership for maintaining the schedule for critical path deliveries despite substantially late input
- Produced a series of videos documenting the propulsion loads process that dramatically reduce the training time required for new engineers
- Simplified the process for generating fatigue loads for nacelle and engine structures
Candidate Info
years in workforce
years at this job
Electrical Engineering
Physics
Lead Engineer
- Planned and analyzed for compliance with requirements, both internal and external tests for the approval of products before the start of production.
- Completed 160 hours of Six Sigma Black Belt training.
- Contributed to successful on time launch of the new horizontal axis washer platform which resulted in Whirlpool to take the top four spots in front load washers in the consumer report magazine.
- Provided quick turnaround of 3 days to setup and run 2 tests on the Matador 3 Bitron valve change along with hundreds of other parts for millions of machines. These tests result in better running machines and cost savings for Whirlpool.
- Oversaw the product approval testing for Service Asset Management Module (SAMM), resulting in a new feature of the Maytag Commercial Laundry product.
- Maintained global project data file by adding, removing, and changing users and resources when required. Managing this application meant better forecasting of project completion and proactive conflict resolution.
Candidate Info
years in workforce
years at this job
Microelectronics
Sr. Product Development Lead Engineer
Engineering expert in solving complex problems in the area of advanced semiconductor physical modifications (managed the debug of Intel server microprocessors, 90, 65, 45, 32, 22 and 14 nm).
- Proven ability to lead functional teams, able to react to shifting priorities to meet business needs. Implemented Lean and Six Sigma measures into 6 labs with an average of 19% reduction in throughput time.
- Start to end project management of upgrades and new installs, with latest 5 achieved in a short interval by directly working with multiple vendors. Created scope of work, Gantt charts, and insured all activities and Site Acceptance Tests meet deadlines and specs.
- Owned development efforts in close collaboration with equipment suppliers to meet the highest industry requirements for the latest semiconductor industry circuit edit equipment (450mm, 10nm).
- 10 years' expertise in single Ion Beam FIB and Dual Beam (DB) tool platforms. Developed 6 different generations of custom tools operation techniques for Circuit Edit tools.
- Led the Intel Santa Clara, CA efforts by conducted DOEs, and acted as key contributor when 4 different platforms were analyzed against performance, in a multinational, cross-functional team.
- Competitive analysis and performance characterization using single and Dual Beam FIB tools, SEM, TEM, LADA and CSAM equipment.
Candidate Info
years in workforce
years at this job
Mechanical Engineering
Development Manager & Lead Engineer
Managed an engineering team responsible for an online expense management application serving over 1700 customers. Engineer and subject matter expert for an imaging application that processed over 200,000 images per month.
- Designed and constructed numerous web pages utilizing ASP, HTML, Javascript, and ADO connections to SQL Server databases.
- Pioneered the use of AJAX to simultaneously populate page content from different sources.
- Engineered an XML based Single Sign On solution using SAML.
- Created a web-based image transfer service using Java to enable real-time upload of documents including gray-scale conversion and compression.
- Managed the development team through three high-quality releases over the period of a year while maintaining my own set of engineering deliverables.
- Architected a telephony application interface using a suite of Java based Web Services.
Candidate Info
years in workforce
years at this job
Business Administration
Business Administration
Manager / Senior QA Lead Engineer
Created a scorecard for monitoring various defects, actual hours, and estimates with the ability to measure them at the project, application, group or individual level and broken down by any given time frame, eliminating many other individual team reports resulting in teams being able to test rather than creating metrics which increased coverage and decreased time to market.
- Led a team in the creation of the SQA portal which is used to capture real time status of test cases and defects for multiple projects/applications revealing exactly where in the life cycle they are positioned. This saved each test lead per project 2 - 3 hours each week in gathering this information manually for senior leadership.
- Implemented a process that is used across IT for estimating the time and dollars it would take to test a project that made estimating quicker and 45% more accurate.
- SEP (Software Engineering Process) Trainer, Auditor, and Committee Member.
- Involved in strategic planning of new applications and projects.
Candidate Info
years in workforce
years at this job
Business Administration
Management
Lead Engineer
Responsible for maintenance and condition of hotel facility. Managed the Perfect Rooms Team division including employee training and scheduling. Responsible for ordering guest room upkeep items and furniture.
- Raised Guest Satisfaction Survey score for Everything in Working Order to 93%
- Supervised TV upgrade project in 950 guest rooms
- Achieved a strong understanding of OSHA, ADA and other safety and security policies
- Hotel Associate of the month - 08/2007 & 11/2007
Candidate Info
years in workforce
years at this job
Mechanical Engineering
Lead Engineer
Co-led the structures design team on a helicopter engine module, designed parts in two next-gen. engines
- Analyzed 150 impeller designs in one day, found optimal design minimizing weight
- Created FEA model of helicopter engine rig, expedited model development time
- Designed diffuser + deswirler, sized compressor case for overpressure, containment, buckling, min weight
Candidate Info
years in workforce
years at this job
Mechanical Engineering
Lead Engineer
Co-led the structures design team on a helicopter engine module, designed parts in two next-gen. engines
- Analyzed 150 impeller designs in one day, found optimal design minimizing weight
- Created FEA model of helicopter engine rig, expedited model development time
- Designed diffuser + deswirler, sized compressor case for overpressure, containment, buckling, min weight
Candidate Info
years in workforce
years at this job
Mechanical Engineering
Lead Engineer
Co-led the structures design team on a helicopter engine module, designed parts in two next-gen. engines
- Analyzed 150 impeller designs in one day, found optimal design minimizing weight
- Created FEA model of helicopter engine rig, expedited model development time
- Designed diffuser + deswirler, sized compressor case for overpressure, containment, buckling, min weight
Candidate Info
years in workforce
years at this job
Chemical Engineering
Lead Engineer for Bottled Refreshment Beverages
Co-led projects that were responsible for the growth of new packaging platforms within hot and cold fill rigid packaging arena (Fruit2O, Crystal Light, Veryfine, and new segments) to solidify category growth
- Co-led bottle redesign project for Fruit2O & Crystal Light which will increase commercial shelf impact at an est. cost savings of $16MM
- Maintained project timelines for Refreshment Beverage projects
- Authored and implemented an internal qualification guide for bottle qualification projects
- Partnered with key business functions (Marketing, Operations, Product Supply, Procurement, Quality, Suppliers) on design, development, and production of concepts for technical, consumer testing and implementation
- Conducted and analyzing technical packaging tests in order to determine feasibility and expected performance in the field
- Led and participated in all line trials for the validation of new materials and suppliers
- Executed the qualification of new bottle suppliers in order to recognize productivity
- Supervised Beverage Co-Op students by providing project direction, and technical guidance
Candidate Info
years in workforce
years at this job
Mechanical Engineering
Aerodynamics Lead Engineer
Supervised a team of 6 engineers to develop a competitive aerodynamic racecar package.
- Established lines of communication between Lead Engineers to ensure product cohesion.
- Implemented extensive filing system for all design work
- Presented prototype designs to automotive companies to secure funding for final car production.
- Performed simulations in ANSYS Fluent to validate all design decisions.
Candidate Info
years in workforce
years at this job
Master of Arts
Master of Arts
Master of Arts
Technical Lead Engineer
U-boot software development for Google's ARM Chromebook
- Presented the functional capability of Samsung Exynos System-on-Chip (SoC) to the VP of product development and winning the software development contract for Chromebook
- Received "Knight" Award, given to best employee of the month in SoC division in SISO
- Mentored three new engineering hires in device driver and U-Boot software development
- Developed U-Boot software solution for Google's ARM Chromebook in collaboration with global
- Collaborated with Open-Source Software Development forum to make the U-Boot source code for Samsung SoC public
- Developed the software for next-generation internal memory increasing the usable memory
Candidate Info
years in workforce
years at this job
Aerospace Engineering
Lead Engineer
- Led technical group of 5 engineers, integrating group activities with external experts and organizations while ensuring application of company policies and practices
- Managed work assignments, prioritizing tasks and allocating resources to meet company, customer, and team needs
- Mentored trainees, providing a structured learning environment to facilitate their growth as productive members of the team
Candidate Info
years in workforce
years at this job
Leadership Training
Lead Engineer / Wells Fargo Account, Winston
Lead Engineer on Wells Fargo account responsible for 2.5 million square foot portfolio in North Carolina and South Carolina.
- Maintained equipment by leveraging all the resources in our group adding electrical, mechanical skill sets needed due to budget constraints.
- Maintained 100% uptime.
- Supervised all projects from scope of work to completion.
- Tracked and evaluated staff performance.
- Trained and coached staff to meet their goals as well as company's goals.
- Wrote all SOPs and MOPs.
- Aided Technicians in trouble shooting equipment.
- Implemented spare part inventory to reduce downtime and responsible for purchase of new parts.
- Collaborated with peers at other sites to network solutions to common issues
Candidate Info
years in workforce
years at this job
Business Administration
Senior Software Test Lead Engineer
Wrote, updated and ran detailed acceptance test plans for legacy airborne email and chat products as well as new Internet-access software product (referred to as "nXt") launched on several global airlines' aircraft. Performed product integration testing with various aircraft manufacturers, platforms and Inflight Entertainment systems; accessed by laptops, tablets and mobile devices.
- Created extensive test plan used by internal resources and external partners to effectively exercise new software patching features, ensuring reliability in all modes of use.
- Adapted legacy and new software test plans to adhere to Airbus documentation regulations thus providing acceptable paperwork to certify software installed on line-fit and retro-fit aircraft.
- Streamlined process to test and upload in-service aircraft with coordinates of new unrestricted airspace areas (determined by regulatory bodies), allowing more passengers to connect while flying as quickly as possible.
- Organized and updated mobile, tablet and laptop devices used for testing as well as added devices to test plans, notating programmatic differences and exercising the product(s) with each.
- Devised plan and supporting documentation used to efficiently test new airline brands, each with differing branding elements, meeting program deadlines.
- Assembled components for Acceptance Test Plan for new product design prior to development using collaborative and extensive communication for use by 3rd party testing group.
- Demonstrated problem-solving leadership skills when filling in for test manager on numerous occasions.
Candidate Info
years in workforce
months at this job
Mechanical Engineering
Automotive Engineering
Lead Engineer
Responsible for coordination between all departments of engineering, production, and project planning for a locomotive qualification, rebuild, and new manufacture OEM specializing in multi-engine switcher grade platforms.
- Directly supervised three engineer personnel: electrical, controls, and new product development, while still functioning as only mechanical engineer executing current projects.
- Developed an Open Issues Tracker to document all problems encountered in the engineering and manufacturing departments in order to institute proper lessons learned and initiate continual process improvement.
- Responsible for developing Engineering Documentation SOP in the absence of any document control system within the department.
Candidate Info
years in workforce
months at this job
Information Technology
Computer Studies
Validation Lead Engineer
Lead team of 4-6 validation engineers through alpha, beta, pc, and pv software releases.
- Communicated with project manager and engineers to set validation program goals and responsibilities.
- Managed daily work load for 4 test engineers.
- Refined test procedures, testing plan, and result documentation.
- Developed automated testing software in C#.net and Powershell used to test functions of released software reducing manual testing man hours.
- Tracked defects via bug tracking system and produced defect dashboard reports.
Candidate Info
years in workforce
years at this job
Embedded Systems
Electrical Engineering
Computer Science
Lead Engineer
- Designed and developed firmware in C, C++ and Qt on Embedded Linux platform for the next generation AdvisorOne security panel of Interlogix.
- Designed and implemented a novel mechanism to integrate third party sensors with the AdvisorOne panel which was filed as patent with USPTO.
- Updated Linux platform & U-boot bootloader to add functionalities like firmware upgrades, LCD, failover mechanism on AMX335x based target hardware.
- Integrated the build and deployment setup with the open source framework solutions such as OpenEmbedded and Arago.
Candidate Info
years in workforce
years at this job
Electrical Engineering
With A Concentration
Technical Lead Engineer
Led a team of 4 engineers that supported hardware.
- Developed, maintained, and read drawings, parts lists, hardware requirements.
- Retrieved certification and historical information from databases and resolved discrepancies and directed hardware repairs.
- Worked with stakeholders to gain approval for project updates and deliverables.
- Interfaced with management and engineers as a technical lead to provide solutions to technical issues, and ensured the delivered solution met the specifications and requirements.
- Developed meeting schedules and worked with procurement to establish requirements for parts
- Conducted Green Belt Project that identified root causes and implemented solutions for Single
- Chose materials, designed, certified and supported fabrication and testing for projects and Ethernet data
- Provided certification schedule estimates and innovative method to power printer, as Technical Lead for printer replacement proposal, potential cost savings of $1M.
- Developed initial project estimate and requirements for laptop certification and fabrication.
- Provided design inputs, certification recommendations and worked technical issues as a Product Lead for a $2.5M project.
Candidate Info
years in workforce
years at this job
Master of Arts
Lead Engineer
Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.
- Inspect, operate, or test machinery or equipment to diagnose machine malfunctions.
- Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.
- Assist Chief Engineer to manage and maintain 492,000 square foot building with two 600-ton chillers.
- Attended to tenant needs such as plumbing repairs, temperature adjustments, and any additional concerns or repairs.
- Use of 360 Facility to manage and organize tenant request in order to respond in a timely manner, program also utilized to distribute work orders to engineering team.
- Monitor and maintain critical equipment for building(s) as well as all Life Safety equipment and guidelines. Communicate with vendors to coordinate services such as repairs or deliveries; this information is sometimes communicated to tenants to comply with request for an issue.
- Overseeing repairs to cooling tower. Assisted in supervision of installation of roof anchors. Construction and renovation projects for building. Installation of fire panel. Completed major preventative maintenance for generators.
Candidate Info
years in workforce
years at this job
Computer Information Systems
Lead Engineer
Responsible for maintenance engineering and documentation of product families.
- Collaborated with customer service, manufacturing and materials functions to complete the manufacturing process.
- Provided technical assistance for revisions to Bills of Material. Interacted with all levels of leadership and manufacturing personnel.
- Quoted, sourced and designed Specials and Engineered to Order (ETO) products that required shorter lead times than New Product Introduction allowed.
Candidate Info
years in workforce
year at this job
Computer Science
Lead Engineer
Developed blocking functionality using core Java and JavaScript for RailEdge software.
- Created VI programs using LabVIEW to acquire and process log data from rail Onboard Computer System.
- Developed automated scripts using TestStand to validate Rail Onboard Computer System.
- Gained experience in requirement analysis to help improve the software design and development.
- Hands-on experience on functional and regression testing.
Candidate Info
years in workforce
years at this job
Mechanical Engineering
Product Development Lead Engineer
NPI/ NTI (New Product Introduction / New Technology Introduction)
- Technical lead on a project nominated for [company name] Chairman Innovation Award in 2014, reducing product cost by 25%
- Led several short-term NPI program with 10year NPV ranging from $10 Million to $30 Million dollars
- Subject Matter Expert, catalyst component technical leader of largest NPI program in [company name]'s history
- Established precise guidelines and standards for NPI gateways
- Fully engaged in program budget and program timeline for all projects. Coordinate work across various engineering team, purchasing and logistics
Candidate Info
years in workforce
years at this job
Engineering
Master of Science
Lead Engineer
Designed and Developed drivers for Astro VG870 and TI custom VIDAR board to interact with the DLP input
- Developed Automation Test Suites for Verification of DLP processors and DLP pico
- Design Verification and Testing main Lead from India working with team in Plano, Tx (US) for DLP Processors, co-ordinated all the activities with US team
- Created tools for automated report generation
Candidate Info
years in workforce
years at this job
Mechanical Engineering
Lead Engineer
4 years experience with the design and development of turbo machinery components (seals, stationary diaphragms and hardware as well as rotor, diaphragm and casing modifications).
- Participates in all aspects of the business cycle from marketing/sales/proposal support through the Engineering and installation process including troubleshooting emergent problems, as well as R&D work.
- Authored and presented case study of very successful project for the Electric Power Conference 2012.
- Acting Lead Engineer for many multi-facility projects (domestic & international).
- Communicates with clients and field service personnel during project planning and execution to obtain data and solve problems related to the design and installation processes (domestic & international).
Candidate Info
years in workforce
years at this job
Computer Science
Computer Science And Engineering
Lead Engineer
Responsible for delivery of design documents, code, regression test cases and enhancement delivery through quality gates of Motorola with high quality
- Handled Fault Management, Performance Management enhancements, Firefox and customization of Linux run level scripts along with which product is installed
- Supporting, troubleshooting critical client issues, resolving issues within Service Level Agreement limits, achieving 100% compliance and was primary support for several modules
- Subject Matter Expert in configuration management in Network Management System domain
- Responsible for role of Informix Database Administrator for entire iDEN team
- Initiated ownership of Intelligent Optimization Tool and handled market cases without prior transition in C# language.
- Presented idea of Automated Voice Pattern Recognition to Vice President and country head for Motorola Solutions India and added as enhancement in the Astro product
Candidate Info
years in workforce
years at this job
Music
Lead Engineer
Worked the first 12 years as a developer for the RMS (Recovery Management System) application using COBOL language in two platforms (AS400 and Mainframe)
- Developed and designed all RMS application to be GUI interface using the Jwalk product from Seagull Software.
- Implementation of the RMS product to new customers (AS400, Mainframe & SQL server), in the USA and/or Latin America.
- Trained new customers on technical and functional usage of the application.
- The last 5 years worked as a Lead Engineer supporting the technical and functional RMS application to customers.
- Successfully completed projects on or before target date.
- Team player roll on assisting peers to meet the project deadlines.
Candidate Info
years in workforce
year at this job
Computer Engineering Technology
Project Lead Engineer
- Project Lead Engineer for R&D division technology transition to Windows XP in New Jersey
- Trained and mentored all Team Lead Engineers and deployment technicians
- Performed transitions personally for high-profile Executive clients
- Provided post-installation support and escalations
- Worked closely with Desktop Engineering from pilot - production to identify application problems.
- Helped develop technical process documentation for senior project management
- Maintained highest level of Customer Satisfaction of 4 major sites
Candidate Info
years in workforce
years at this job
Lead Engineer
Manage all aspects, including personnel and infrastructure, for the data center supporting all application development teams in the US, India and Australia.
- Support our VMWare Customer Cloud Environment
- Provide Desktop Support of Windows 7/8
- Lead Windows XP to Windows 2008/2012 Migration effort for over 300 users
- Lead Windows 2003 to Windows 2008/2012 migration effort for over 300 users
- Provide training of our latest product offerings to our off shore support staff
Candidate Info
years in workforce
years at this job
Electronics And Communication Engineering
Digital Signal Processing
Lead Engineer
Responsible for development of DV plans, reviews, test case development and tracking of Display Sub System. Display subsystem has interfaces like DSI, HDMI and DP/eDP.
- Development of verification plan.
- Development of test cases for system level scenarios.
- Handling Power and clock scenarios, Idle/ wakeup and interrupt management scenarios
- Porting 3rd party IPs like VP8 and GFX test cases to the OMAP6 environment
- Optimal reuse of SubSystem DV to SoC DV to reduce the cycle time and cost
Candidate Info
years in workforce
years at this job
Lead Engineer
Optimum utilization of resources. Accurate prioritization, good planning, documentation, implementation, monitoring and control of wafer line quality. Lead 4 engineers
- SQE for precious metals component used in sputtering process, Wafer equipment supplier audit
- Conceptualize and documentation of Quality System applicable to worldwide site
- Weekly and Monthly Reporting of KPI and annual Quality goal setting. Implemented at U.S.A and Asia factory-Total of 11 sites
- Quality Engineer for RoHS, REACH and other environmental requirement as part of HGST social responsibility
- Management of Database
More Lead Engineer
Resumes
Lead Engineer Resume Success Stories
