Digital Design Engineer Resume Samples

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Digital Design Engineers, or just Design Engineers, conceive and create digital products ranging from smartphones to offshore drilling components. Sample resumes for the position reflect responsibilities like performing RTL design for digital and analog modules in PIC microcontrollers, simulating modules and full-chip at RTL and gate-level to verify the functionality and timing, and developing and executing the test verification plan. There is no formal educational requirement to become a Digital Design Engineer, but those interested in beefing up their resumes can obtain a degree in one of the main branches of engineering, such as mechanical, electrical, civil or computer engineering.

Find out what is the best resume for you in our Ultimate Resume Format Guide.

1

Digital Design Engineer

Redesigned the image compression memory boards for the video teleconferencing market.

  • Corrected a design flaw in a key product, completed the redesign in record time, saving over $300,000 a year in manufacturing costs.
  • Designed the X.21 dual channel WAN telecommunications board containing a 68020 microprocessor and finite state machines. Developed test techniques, integrated hardware, firmware and system software and prepared first beta tests of the subsystem at customer sites.
  • Directed the specification and design of a dual RS449 high speed communications channel card for a new video teleconference CODEC.
  • Designed the digital image filter controller using FPGAs and a new ASIC chip. This digital filter was used on new digital image display boards to be used in image compression products.
Candidate Info
9
years in
workforce
3
years
at this job
BS
Business Administration
Project Management Certification
2

Digital Design Engineer

Designed, 8 of 12 PCB's used in the Low Altitude Navigation and Targeting Infrared Night System ("LANTIRN") digital scan converter.

  • Incorporated 2 dimensional digital filter and developed new line interpolation algorithms.
  • F16 software integration at general dynamics and Flight test at Edwards AFB.
  • Designed circuit using programmable logic devices which decode optical pulses off the back of the scan mirror and calculate the mirror scan position address.
Candidate Info
5
years in
workforce
5
years
at this job
AS
Instrumentation Technology
BS
Electrical Engineering
3

Digital Design Engineer

Designed DSP and Image Processing PCBs for GE's first premium Ultrasound machine, the LogIQ700.

  • Front End Equalization Board. IQ data filtering and B-Mode image correction for depth effects.
  • Back End CINE Board. Image storage and processing with programmable replay capabilities. Supported first 3D images from a 2D machine. Designed a gate array image controller.
  • Initiated and performed HALT and HASS design integrity testing at the system and rack level for the Ultrasound business. Improved MTBF and design quality of several PCB designs.
Candidate Info
14
years in
workforce
7
years
at this job
BS
Engineering Physics
Goddard Space Flight Center Summer Internship
4

Avionics Systems/digital Design Engineer

Avionics Systems Engineer/Senior Digital Design Engineer

  • Multipurpose Bomb Rack (BRU-69/A) RFP Technical Volume. Provide multiple weapon interfaces electronic solution. Successfully completed the RFP electronic technical package.
  • Rail Launcher (M299) RFP Technical solution. Provided multiple weapon interfaces electronic architecture. Successfully completed the RFP electronic solution.
  • Produced electronic technical solution for a Bomb Rack Pneumatic deployment system. Conceptualized bomb rack electronic solution with multiple weapon interfaces and develop requirement specifications.
  • Aerial Refueling System trade studies and technical assessment for adaptation to an UAV aerial refueling.
  • Oxygen System Meter. Generated requirements document and redesigned the oxygen meter controller board.
  • Military Aircraft Electrical Interfaces (F/A-18, F-35, F-22, V-22), Weapon Interfaces (Hellfire, JDAM, JAGM, TALD, SDB, JMMI, and MMSI), Military Standards (MIL-STD-1553, MIL-STD-1760E, EBR-1553, and Miniature Munitions Store Interface) and schematic capture (OrCAD).
Candidate Info
43
years in
workforce
2
years
at this job
C
Technology
Bsee
5

Digital Design Engineer

Tested and designed embedded systems for SATA applications with Xilinx and Altera FPGAs.

  • Developed and integrated Firmware for SATA AHCI protocol.
  • Integrated Linux drivers for the SATA peripheral core with the Altera and Xilinx SoC FPGAs.
  • Supported customers with integration of Intellectual Property.
  • Created internal and external documentation on projects.
Candidate Info
7
years in
workforce
3
years
at this job
BS
Electrical Engineering
6

Senior Digital Design Engineer

Architected, implemented, and tested software-defined radio (SDR) applications in GSM, UMTS, and CDMA2K. Designed DSP functions in receiver, such as synchronization, descrambling, de-interleaving, decoding, filtering, CRC correction, symbol tracking, frequency correction, etc.

  • Created MATLAB and Simulink simulation models, built HDL models, and architected system design for performance and speed.
  • Generated System on Chip (SoC) applications with embedded processors, such as NIOS-II, and tested functionality by writing automated test scripts and performing lab and field tests.
  • Designed complete communication systems by providing interface to all external devices on hardware platform, such as PCIe bus, ADC, DAC, DDR, OMAP, Ethernet MAC, Flash, SPI, UART, I2C, etc.
  • Provided feedback on PCB design based on system requirements and design architecture considerations.
  • Led customer meetings, conducted project status presentations, provided technical advice to project team, coordinated with outside contractors on project tasks, and mentored new hires.
Candidate Info
11
years in
workforce
8
years
at this job
BS
Computer Engineering
MS
Electrical Engineering
7

Principal Digital Design Engineer

Design of Image Scanner ASIC with customer (HP) design team. Designed (verilog) and verified interface logic between USB core and scanner backend.

  • Wrote functional specification for USB core.
  • Inserted internal scan, executed ATPG, created test vectors for ASIC fault coverage.
  • Provided consultation for customer design team on scan, synthesis, simulation, USB technology, and general LSI digital library requirements.
  • Design of SSA Disk Drive Controller ASIC. Designed (verilog) and verified interface logic between SSA core and disk controller backend. Integrated SSA protocol engine. Wrote functional specification.
Candidate Info
9
years in
workforce
3
years
at this job
BA
Liberal Arts / Engineering
BS
Electrical Engineering
MS
Computer Engineering
8

Associate Digital Design Engineer

Designed a plug-in PCB of I/O Channels for a Millimeter Wave Radio that enabled systems to be re-configured after final assembly.

  • Managed development projects of three ASIC's that produced large cost reductions.
  • Took ownership of digital hardware product for Engineering and fully supported it in Manufacturing by writing and implementing ECO's that fixed or improved problems.
  • Analyzed faulty power supply performance, selected its replacement and performed final qualification for its release.
Candidate Info
14
years in
workforce
3
years
at this job
AS
Electronic Engineering Technology
BA
Electronic Engineering Technology
Design
9

Digital Design Engineer

Designed and created firmware modules to work within an existing system

  • Wrote new modules and edited existing modules in VHDL
  • Developed test scripts in Python and utilized these scripts to quickly test multiple units
  • Debug firmware and software by testing units, isolating problems, and fixing bugs
  • Designed fixtures to test units using various equipment such as oscilloscopes, spectrum analyzers, and pulse generators
  • Performed individual tasks while functioning as a member of a team
  • Responsible for secrecy of projects
Candidate Info
3
years in
workforce
10
months
at this job
BS
Electrical Engineering
10

Digital Design Engineer

Performed wide range of engineering functions for a fast paced RFID Semiconductor Company.

  • Responsible for cross-functional team support and external supplier interface.
  • Designed and tested electrical validation plans using specification analysis.
  • Implemented engineering tools for complex electrical designs including RFID and memory chips.
  • Provided technical expertise, quality testing, benchmark studies, backend research and troubleshooting of complex problems.
  • Performed external vendor relation for purchasing and maintaining CAD tools.
Candidate Info
2
years in
workforce
2
years
at this job

Your Resume, Made Easy.

You are looking for your dream job and need a resume? My Perfect Resume is your solution and takes the hassle out of resume writing. Create the perfect job-worthy resume effortlessly in just a few clicks!