- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Maintenance Specialist Resume Samples
Filter:
No results found
Candidate Info
11
years in workforce
7
years at this job
AS
Associate of Science
Aviation Maintenance Specialist
Drove aviation maintenance with training and subject matter expertise as an AH-64D Apache Aircraft maintainer. Promoted to rank of Sergeant and served as the Crew Chief, ensuring 100% accountability of over $20M in aircraft equipment and overseeing the daily inspections of aircraft. Deployment to Afghanistan including increased accountability of a group of 13 subordinates. Additionally served as the unit movement officer following National Transportation Safety standards.
- Drove safety and risk assessment that resulted in zero discrepancies and safety incidents.
- Delivered major aircraft maintenance for 5+ aircraft according to Army and FAA standards with 100% documentation; completed and maintained thorough records according to regulation.
- Traveled to Europe with select group to represent the United States while coordinating and training with peers in Allied Countries to show cohesion of allied forces.
- Served and personally led a Downed Aircraft Recovery Team where knowledge contributed to 100% readiness.
- Used Microsoft Word and Excel to track daily, monthly, and annual administrative duties up to and including inspections, equipment tracking, and subordinate performance.
- Created and maintained a Petroleum, Oil and Lubricants Program for storage and disposal per EPA standard.
- Founded and implemented an inventory accounting control program for approximately $200,000 worth of aviation bench stock parts.
- Coordinated and implemented a system for Squadron accountability and control of tool room resources valued up to $1 million.
Candidate Info
9
years in workforce
9
years at this job
AAS
Electromechanical Technology
BS
Operations Management
Strategic Aircraft Maintenance Specialist, Crew Chief Kc-135a/r and Rc-135u/v/w
- Performed inspections, servicing, and repairs on assigned aircraft
- Accompanied assigned aircraft to temporary duty locations, maintaining aircraft to a mission ready state
- Coordinated with all other maintenance departments when assigned aircraft required "specialized" maintenance
- Earned two AF Achievement Medals
Candidate Info
15
years in workforce
6
years at this job
Maintenance Specialist/mro Purchasing
Setup and maintain the current MP2 ordering system. Update costs on all parts in MP2, requires three quotes from individual suppliers. Maintain min/max levels for all stock supplies needed in plant production, maintenance, office supplies, janitorial.
- Process requisitions and purchase orders for all MRO and Outside Services. Responsible for all MRO receiving of items to stock or work orders.
- Setup and implemented the use of vending machines for production supplies needed for both locations. Maintain employee login information and assist with any issues the employee may have in the use of the vending machines.
- Responsible for ordering parts needed for repair of downed equipment, getting items or service technician expedited for same/next day delivery.
- Maintain daily Excel spreadsheets for Controller and Plant Manager, detailing all purchases and expenses by GL accounts.
- Complete Physical Inventory on MRO items stocked in the production crib.
Candidate Info
37
years in workforce
20
years at this job
Maintenance Specialist
Tear down and setup of heavy equipment. (brake press, laser, gantry systems, robots etc)
- Worked with all manufacturing, safety and quality departments to ensure that equipment was in safe working order, producing efficiently and meeting quality standards.
- Implemented first PM program on all manufacturing equipment.
- Overall facilities maintenance.
- Involved in multiple Continuous Improvement projects.
Candidate Info
12
years in workforce
9
years at this job
GED
GED
Facilities Maintenance Specialist
Led staff of five handyman; including staff scheduling, administering paperwork, and overseen work practices and working conditions for staff
- Completed maintenance and work orders
- Recommended new equipment and maintenance procedures to the facility manager
- Repaired furniture and ordered replacement pieces when necessary
- Stooped, climbed ladders, and lifted heavy loads during set-up for events
- Fixed and replaced electrical fixtures
- Maintained and organized building walls, floors and ceilings
- Regularly updated maintenance database using computer workstations
- Carried out all kinds of carpentry, painting and janitorial duties
Candidate Info
7
years in workforce
7
years at this job
Aircraft Maintenance Specialist
- Inspected, repaired, and maintained various airframes
- Controlled communication and electrical systems
- Facilitated all maintenance and mechanical work on KC-135R and KC-10 airframe.
Candidate Info
8
years in workforce
4
years at this job
HS
High School Diploma
Welding/line Isolation Maintenance Specialist
Welding, bolting and pipe cutting during refinery maintenance turnarounds
- Attention to detail and quality of workmanship demonstrated by over 95% of welds passing weld tests
- Among the last members of almost every turnaround due to high quality of work, flexibility, and efficiency
- Demonstrated willingness to work 12-16 hour days while maintaining focus during both day and night shifts
Candidate Info
28
years in workforce
11
years at this job
AS
Semester
Primary Leadership Development Course
Maintenance Specialist Technicians
- Supervise staff of 30 employees consisting of production, maintenance and engineering.
- Manage day to day operations of production, maintenance, and engineering operations within Photo department of a Semiconductor company.
- Supervised 12 CVD technicians and 7 Maintenance Specialist Technicians across 4 shifts in a 24/7 semiconductor facility. Manage up to 3 million dollar fiscal budget.
- Met or came under budget goals all but one quarter.
- Consistently met availability goals on 8 critical toolsets.
- One of only 3 production supervisors selected to make transition from production to maintenance
- Reduced budget by 40% through contract elimination and becoming self sufficient on multiple tool sets
- Created training plan that has been adopted by 3 other maintenance areas
- Went from lowest producing shift to second highest in less than 12 months.
Candidate Info
10
years in workforce
10
months at this job
AAS
Industrial Technology
BS
Technology Management
Medicine, Law
Maintenance Specialist
- Perform PM's and repair of electrical and mechanical equipment
- Installation of machinery performance improvements
- Participate in performance and safety improvement projects
- Forklift, Crane, Boom Lift and one-man lift Experience Company Certified
- Worked with various electrical equipment from 480volts AC to 12volts DC
- Worked on plenty of various Facility Projects and Machine Maintenance work
Candidate Info
27
years in workforce
10
years at this job
Electronic Engineering
Maintenance Specialist
- Manage and support drilling & production efforts of over 25 personnel with activity & quality control audits
- Leading the planning of preventive and corrective maintenance, providing execution support to offshore operation maintenance team
- Support contract managers with performance maintenance and quality assurance for maintenance delivery strategies
- Accountable for maintenance plan integrity development, and implementation within an 8Q frequency
- Assure all operations are conducted in compliance to BP SOP policies
- Assure all employees training & certifications are current to company & goverment requirement
Candidate Info
21
years in workforce
15
years at this job
Maintenance Specialist
- Planned and laid out work to meet production and schedule requirements.
- Adhered to all applicable regulations, policies and procedures for health, safety and environmental compliance.
- Coordinated inventory and cost control programs.
- Reviewed operations and conferred with technical or administrative staff to resolve production and processing problems.
- Helped achieve company goals by supporting production workers.
Candidate Info
9
years in workforce
7
months at this job
Industrial Mechanics
Maintenance Specialist
- Using our Computerized Maintenance Management System (CMMS), you receive work orders, identify faulty equipment, and acquire parts and equipment to complete repairs
- Repair of production equipment from basic hydraulic equipment to complex CNC machinery, performing both electrical and mechanical work
- Repairing critical equipment, performing preventive and predictive maintenance, and completing projects such as mechanical and electrical hardware and software upgrades
- Communicating accurately, concisely, and professionally with your customer as to important repair steps taken, parts ordered, and time estimated until completion
- Participating in daily shift meetings, prioritizing and reviewing work orders to schedule daily work
Candidate Info
19
years in workforce
14
years at this job
BBA
Marketing
MBA
Marketing And Management
Provide Maintenance Specialist
- Responsible for training new employees on departmental functions and procedures
- Project Manager for various inter-departmental assignments
- In charge of microfiching and running claims pending reports
- Researched, loaded, and updated provider health information
Candidate Info
18
years in workforce
2
years at this job
AAS
Applied Science
Instrument Maintenance Specialist
Additional duties included Certifying Scientist, Sample Prep Technician.
- Performed all preventative maintenance and troubleshooting repairs on Liquid Chromatography and Mass Spectrometers (LC/MS). Including Waters-Xevo with a Acquity UPLC, Agilent 6460 LC/MS system and Sciex 4500 MS with a Shimadzu LC-20ADXR system.
- Tuning and calibrating Mass Spectrometers as needed.
- Worked closely with R&D staff on method development and optimization of analytes of interest.
- Recorded and organized all records of maintenance performed and keep parts inventory records.
- Review and document calibrators and QC data.
- Document all failing QC or calibrators and follow SOP procedures regarding all data.
- Disassembly and reinstallation of Agilent 6460 LC/MS system due to laboratory relocation.
- Prepping patient samples and QC samples and keeping track of inventory and supplies.
- Pipetting and making calibrators and QC stock solutions from drug standards.
Candidate Info
19
years in workforce
2
years at this job
Business Management
Certification
Management
Maintenance Specialist
- Maintain 74 facilities
- Electrical, HVAC, plumbing, janitorial, construction, painting, roofing, budgets, contracts
- Co-ordinate with contractors to insure all buildings operating clean and properly
- Develop department wide/ city wide execution plans; inventory control, product distribution, purchasing, contractor schedules, and negotiations
Candidate Info
32
years in workforce
1
year at this job
AA
Arts And Sciences
Senior Equipment Maintenance Specialist
- Responsible for scheduled and unscheduled preventive maintenance and calibration.
- Execute troubleshooting techniques utilizing electronic test and measuring equipment.
- Interface and communicate with incoming and outgoing shifts.
- Collaborate with engineers and other groups to resolve maintenance and process issues.
- Improve equipment reliability and minimize down time.
- Support continuous improvement activities for productivity and yield enhancement.
Candidate Info
10
years in workforce
5
years at this job
HS
High School Diploma
Diesel Maintenance Specialist
- Respectfully gaining access to the operator vehicles and taking the operators on a road test to identify the problems with the vehicles and trailer operation while in uses. Safety storing vehicles and trailer in service bay to continue troubleshooting procedure. Properly identify the cause of the issue and researching using the technical manuals.
- Properly inform the Supervisor of the issue with the vehicle and trailer. Troubleshoot the issue or order the part and replace the damage item. Also checking the vehicle for potential issue and lubrication joints. Safely troubleshoot or replace the damage item while operating equipment and wearing proper protective equipment.
- Maintain a respectable and possible timeline for both Supervisor and operator. Maintain a good record of the service I have preform and completed.
- Also keeping 100% accountability of all tools and equipment used to repair the vehicle and trailer.
- Inventory $100,000 worth parts and equipment.
- Return the vehicle and trailer to the operator and give the operator a copy of the service check list. Informing the operator of the service that have been perform, before releasing the vehicle and trailer back to the operator.
Candidate Info
10
years in workforce
7
years at this job
Account Maintenance Specialist
- Take inbound calls assisting Sales Reps & Customers on account issues
- Account maintenance including billing issues
- Set up accounts online, updating personal account information
- Dealing with key accounts under the negotiated contract
- Setup customers profiles to order online
- Created personal cross reference product codes
Candidate Info
1
year in workforce
1
month at this job
HS
Greenville Tech Dual Enrollment
Nursing And Business
Biology
Facilities Maintenance Specialist
- General maintenance and repair of two city parking garage premises.
- Operation and maintenance of city vehicle.
- Communication and collaboration with supervisors and coworkers.
- Provide quality customer service to patrons.
Candidate Info
16
years in workforce
5
years at this job
Real Estate
Maintenance Specialist
- Order and receive technical and non-technical supplies in PeopleSoft for toxicology.
- Receive, stock, and control all materials in the warehouse and chemical storage supply room.
- Coordinate and submit quarterly inventories
- Maintain all aspects of facility operations, including HVAC, electrical, plumbing, infrastructure, gas supply, and grounds, in consultation with the lab manager.
- Schedule and coordinate vendor visits in relation to facilities, in consultation with the laboratory manager.
- Resolve vendor related issues related to facilities, in consultation with laboratory manager.
- Additional facilities or warehouse projects, as assigned by the manager, to support toxicology or clinical operations.
Candidate Info
7
years in workforce
11
months at this job
HS
Technological Background
Maintenance Specialist
- Responsible for the overall cleanliness, repair, and safety of facilities used for congregate, supported and transitional housing and office spaces.
- General mechanical repairs; apartment type heating and cooling systems; painting; and minor construction skills; such as dry walling, painting and patching and plugging holes
- Perform routine maintenance functions including light plumbing, light electrical repairs, lock replacement and repair
Candidate Info
14
years in workforce
14
years at this job
Maintenance Specialist
- Recruited to assume broad-based maintenance responsibilities.
- Gained expertise in all facets of welding operations.
- Deliver high quality welding results on important projects.
- Operate forklift in safe and efficient manner.
- Tasked to conduct trailer air and electrical repairs.
- Effectively perform electrical and hydraulic maintenance procedures.
- Skilled in keeping vehicles operational for maximum periods.
- Assumed duty in update and repair of propane systems.
Candidate Info
23
years in workforce
12
years at this job
Facilities Maintenance Specialist
- Responsibilities include HVAC maintenance and PM, Life Safety systems management, electrical repair and installations.
- ERT Member, HAZMAT certification (not current)
- Irrigation and Landscaping systems
Candidate Info
12
years in workforce
7
years at this job
HS
High School Diploma
Maintenance Specialist
- Coordinate and monitor vendor maintenance for large repairs.
- Employ wide variety of hand and power tools including drills, and electronic testing devices.
- Follow company procedures to maintain work environment in a neat and orderly condition.
- Prepare and administered preventative maintenance work orders.
- Repair wiring, plumbing, equipment, and machinery.
- Responsible for wide variety of duties including, painting, carpentry, electrical repair, installation, building repair and HVAC
- Maintain compliance with company standards to perform all maintenance activities.
- Perform and maintain logs of fire safety instruction for staff.
- Maintained records required for state inspection.
- Insured building remained up to codes and standards with State / local/ company policies.
Candidate Info
11
years in workforce
6
years at this job
Facility Maintenance Specialist
- Supervise electrical and mechanical systems maintenance, new constructions and projects.
- Coordinator in the installation of fire alarm and systems security.
- Prepare, review, and revise facility maintenance contracts documents and files.
Candidate Info
6
years in workforce
7
months at this job
Automotive Tech Program
Maintenance Specialist
- Monitor and adjust network HVAC issues
- Painting and drywall repair
- Work with outside vendors to complete tasks
- Shipping, receiving, and material handling duties
- Replace ballasts, light bulbs, and automatic sensors
- Repair and/or replace automated plumbing fixtures
- Assist in conference room set , and office furniture moves
- Preventive maintenance around the whole building
- Fix commercial freezers and refrigerators for the kitchen
- On-call every weekend for emergency situations
Candidate Info
15
years in workforce
7
months at this job
Maintenance Specialist
- Site safety representative/director. Conduct daily, weekly and monthly safety meetings for employees and contractors. Maintain site safety training schedules and documentation. Conduct safety audits and inspections. New hire and contractor safety orientations. Monthly safety reporting through CHESS. Communicate all activity to corporate safety manager. Maintain working relationship with client safety personnel and ensure their SHE programs are enforced per our contract.
- Planning, scheduling and contractor control. Oversee contractor activities in lawn care, manned guarding, and site support sub-contractors for normal maintenance/repair activities. Site PM System's set-up. Document control.
- Boiler Operation and maintenance. Steam piping system maintenance and repair.
- Basic HVAC troubleshooting and repair. Inclusive of chillers, cooling towers, freezers, coolers, split and package A/C, HV and exhaust fans.
- Fire alarm/suppression systems maintenance and repair.
- General facilities maintenance including doors (Automatic drive controlled sliding and curtain, Electro-mechanical, manual overhead and man), Lighting, Electrical distribution, waste stream/effluent management and control.
More Maintenance Specialist
Resumes
Maintenance Specialist Resume Success Stories
