- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Engineer Intern Resume Samples
Filter:
No results found
Candidate Info
2
years in workforce
8
months at this job
BA
Mechanical Engineering
MS
Industrial And Systems Engineering
Quality Engineer Intern
- Standardized and documented the quality weld inspection process for the components of Medium Wheel Loaders
- Analyzed the appropriate use of the acceptance criteria 1E0099 for weld inspection to assure quality
- Conducted time studies and recommended cycle time for weld inspection of Medium Wheel Loaders while differentiating value-added and non-value added times
- Introduced a new system by eliminating the multiple documentation of defects saving 50% of the time taken for weld inspection.
- Improved % of agreement between weld inspectors from 33% to 67% by retraining 12 inspectors
- Initiated implementation of built-in quality for paint inspection eliminating the missing paint defects by 25%
- Interpreted blueprints and created checklists for weld inspection on Largest Wheel Loader reducing missing weld defects by 20%.
Candidate Info
3
months in workforce
3
months at this job
BS
Mechanical And Aerospace Engineering
Sales Engineer Intern
- Executed remarkable operational improvements and successfully enhanced efficiency of both shipping and filing processes.
- Effectively improved on first year engineering expertise and amplified skill set by adeptly collaborating with engineers and observing engineering procedures.
- Strove for customer excellence between the sales and engineering department by providing prompt and efficient service whilst resolving matters in a timely manner.
- Presented supervisor with crucial information following client meetings by successfully gathering relevant data.
Candidate Info
8
months in workforce
8
months at this job
BA
Mechanical Engineering
MS
Industrial Engineering
Quality Engineer Intern
- Exercised lean tools such as Kaizen, 5S and process mapping as part of continuous improvement program.
- Assisted in performing Pareto analysis and identified top 6 positions where 78.56% of total defects occur.
- Employed 4M analysis practice for complex quality issues within the development of various components.
- Aided in originating the issues by using fish bone diagram.
- Helped in final inspection and testing to ensure items were fit for customer application.
- Resolute the root cause of supplier manufacturing problems and assisted in implementing timely, effective, and efficient quality resolutions.
Candidate Info
2
years in workforce
3
months at this job
BA
Mechanical Engineering
MA
Industrial Engineering
Maintenance Engineer Intern
Prepared schedules for preventive maintenance of equipment to ensure uninterrupted operations and reviewed maintenance schedules to determine preventive maintenance to be performed on equipment.
- Performed quality inspection and documented the work done at each workstation simultaneously
- Maintained a database for replaced flawed parts and new parts by continuous monitoring of expenses and controlled according to the budget allocated for maintenance.
- Provided emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service.
- Converted sheet metal waste into a protective shield to keep the pressing machine sporadic flashes injuring employees.
Candidate Info
7
years in workforce
3
months at this job
BS
Chemistry
MA
Civil Engineering: Environmental Water Resources Emphasis
Engineer Intern
- Revised various documents of water system operations and maintenance responsibilities, white people reports, and Environmental Assessments in compliance to federal regulations.
- Developed knowledge of NEPA and CEQA environmental planning regulations in specifics to Forest Service Engineering
- Conducted use of GPS/GIS with Trimble Geo 7x and ArcGIS in mapping bridge and water system structures throughout forest
- Coordinated various tasks around engineering department in daily operations from water operations, bridge inspections, and site plan organization
Candidate Info
4
months in workforce
4
months at this job
BS
Mechanical Engineering
Engineer Intern
- Produced and reviewed process instrumentation specifications and hydraulic calculations.
- Identified and incorporated useful trends and best practices to maximize operations.
- Evaluated P&ID's to inspect data received on ethylene plant revamp project.
- Used hydraulic software to perform calculations on process flow diagrams.
- Conceptualized and modeled hardware of robot on solidworks 3-D CAD software.
- Wrote C++ program with Arduino open source platform for Bluetooth control of robot.
- Implemented and tracked project progress with Microsoft Project software.
Candidate Info
4
months in workforce
4
months at this job
BE
Computer Science And Technology
MS
Computer Science
Java Engineer Intern
- Developed an Android puzzle maze game and improved game process using Java and OGEngine
- Designed game core logic and implemented a random algorithm to speed up maze map generating process
- Improved fluency of game process by modifying collision algorithm and reduced time complexity
- Designed game User Interface and game sound using Photoshop and After Effects
Candidate Info
4
months in workforce
4
months at this job
BA
Mechanical Engineering
MA
Mechanical And Aerospace Engineering
Design Engineer Intern
Assumed an active role in all the aspects of designing a model and making it physically feasible.
- Designed a best suitable mold for a customer-given component judiciously balancing the quality with the budget and time of delivery.
- Developed the real time prototype using the Professional Engineer (ProE) software subscribing to the fluid flow through the mold for efficient cooling of the molten plastic.
- Worked on-site at the job shop observing the working of the mold and checking the accuracy of the product.
Candidate Info
5
years in workforce
4
months at this job
BA
Electrical And Electronics Engineering
Quality Engineer Intern (commercial Assembly Plant)
- Completed the summer internship program as a Quality Engineer Intern at the Commercial Assembly Plant
- Helped collect and manage data for Q-release for the production launch of a vehicle being assembled
- Conducted studies for the customers Master Capability requirements
- Completed MSA studies per the customers request (including gage r&r)
- Communicated with other departments about defects and strategize corrections
Candidate Info
3
years in workforce
5
months at this job
BS
Management Information Systems, Minor
Itops/netops Systems Engineer Intern
- Provided help with developing a “Wireless AP Map Application” that tells how many users are using Splunk’s Wi-Fi
- Used Ansible to automate/configure Pi 3s as a network monitor tools, which will be used in all Splunk’s location
- Developed a reverse proxy using NGIX and Ansible to manage end user quarantine
- Triaged and sustained Networking/Server/Engineering Application SNOW tickets to ensure SLAs are met quarterly
- Assisted in helping update VMware vSphere’s version and create requested VMs using Powershell & Ansible
Candidate Info
3
years in workforce
3
months at this job
BS
Computer Science
Software Engineer Intern
- Developed UI functionality for various projects using Swing and JavaFX API
- Launched Jenkin jobs using the Master/Worker model to continuously integrate and continuously deliver commands across machines on distributed networks
- Played a key role in developing innovative software components to support L-3 Communication’s C4 (Command, Control, Communication, and Concepts)
- Created Java code and aided in the design, preparation, and execution of unit tests
Candidate Info
1
year in workforce
3
months at this job
BS
Mechanical Engineering
Reservoir Engineer Intern
- Designed and coordinated petrophysical studies
- Developed and applied reservoir optimization techniques
- Transferred Gulf of Thailand well log data into new proprietary software program: Petrel E
- Member of a team of four summer interns; Presented to management committee historical
Candidate Info
3
years in workforce
1
year at this job
BS
Mechanical Engineering
Mechanical Engineer Intern
- Modeled chilled water system in PIPE-FLO
- Updated maintained drawing of domestic and fire water system.
- Developed schematic of existing chilled water, hot water, and steam systems.
- Researched existing conditions for future tenants.
- Reviewed submitted drawings.
Candidate Info
7
years in workforce
4
months at this job
BA
Construction Management
Field Engineer Intern
- Developed a shipping plan to comply with ADOT permitting requirements.
- Reviewed and submitted RFIs and submittals, and logged them into Prolog.
- Recorded internal, owner/contractor and engineer meeting minutes and compiled them into Prolog.
- Assisted in document review prior to construction drawings being issued for construction.
- Produced and maintained daily field reports.
Candidate Info
14
years in workforce
1
year at this job
BS
Mechanical Engineering
Mechanical Engineer Intern
- Executed and oversaw project management
- Designed renovation plans to increase production, optimize layout and minimize cost
- Worked with engineering team in large proposal project
- Created project equipment lists
- Produced and analyzed cost estimate for a renovation project
- Created AutoCAD layouts and integrated renovations of AutoCAD P&ID's
Candidate Info
1
year in workforce
4
months at this job
BS
Mechanical Engineering
Mechanical Engineer Intern
- Developed a system to selectively/digitally remove overprint varnish from large-scale printing press media
- Enabled sale of 25% more HP digital printing presses
- Allowed HP to enter $200 Billion packaging industry
- Designed and analyzed experiments in order to prove a novel concept that varnish can be digitally removed from media (this technology does not exist yet)
- Machined custom hardware to enable further research and development of new product
- Established base of knowledge on a novel and unexplored concept (digital varnish removal)
Candidate Info
3
months in workforce
3
months at this job
BE
Automation
MS
Computer Engineering
Software Engineer Intern
- Encapsulated and decoupled the existing web service framework by developing a set of APIs for applications and QA tests.
- Designed and implemented a mock web server to facilitate the development of web-based products.
- Developed a project-auditing software to summarize and visualize the sprint progress, saving hundreds of working hours monthly.
Candidate Info
5
months in workforce
5
months at this job
MS
Computer Science
Computer Science And Engineering
Software Engineer Intern
- Worked in the Advanced Concepts team, Aeronautical Division
- Developed a prototype from scratch using gesture recognition devices, Microsoft Kinect and Microchip MGC 3130, which can execute certain flight commands in response to the gestures recognized in a cockpit
- Developed a C module extending the capabilities of the devices to understand custom gestures depending on the hand co-ordinates received as input
Candidate Info
4
months in workforce
4
months at this job
BS
Mechanical Engineering
Facilities Engineer Intern
Responsible for working with and assisting the Facilities Engineering Group. Planed and implemented the design of offshore production platforms in order to maximize production efficiency. Researched production/processing equipment and gathered data relating to their ability to meet organizational needs.
- Participated in a Flare Relief study of offshore dill platforms
- Analyzed pressure relief systems on drill platforms
- Analyzed and examined P&IDs, PFDs, and piping isometric drawings
- Created Protected System Sketches
- Built piping models including fittings and ancillary equipment.
Candidate Info
3
years in workforce
1
year at this job
BS
Management Information Systems
Software Engineer Intern - Data Visualization
Developer for a graph SIEM visualization web application using HTML, CSS, JavaScript, and Splunk.
- Collaborate with Data Scientists, Security Analysts, and Software Engineers to determine scope of development iterations.
- Created a Splunk application that visualized SPL queries in d3.js.
- Configured a Cassandra cluster with a sample data set of one million customers.
Candidate Info
1
year in workforce
3
months at this job
BS
Mechanical Engineering
Engineering Science Transfer
Manufacturing Engineer Intern
- Created and edited engineering drawings using Solidworks
- Participated in prototyping and assembly of light fixtures
- Inspected extruded parts and PCB boards for quality
- Completed inspection reports
- Tested light guides for optical properties and LED boards for efficiency
- Ensured quality of products met company standards
Candidate Info
3
years in workforce
4
months at this job
Mechanical Engineering
Cyclone Business Jet
Product Engineer Intern
- Created CAD drawings & BOM for agricultural planter using Inventor/Pro-E
- Implemented basic and detailed engineering of embedded controls and automation using CODESYS
- Worked closely with machinist to develop manufacturing techniques and production process
- Involved in researching agriculture projects, creating new specifications/SOP and organizing engineering documents
Candidate Info
8
months in workforce
8
months at this job
BS
Mechanical Engineering
Test/product Engineer Intern
- Created and updated CAD models and detailed engineering drawings in Unigraphics NX9
- Performed tolerance stack up analysis, often with GD&T
- Executed revision control for parts, drawings and assemblies
- Utilized the Part Families feature in NX 9 to create, edit, add and delete features and models
- Individually researched and developed analytical models for predicting axial thrust
- Enhanced and performed a test plan for acquiring large amounts of data from the test stand
- Performed data analysis to verify analytical models
- Prepared and presented my testing results and analytical models to high level engineers and management
- Completed CFD to analyze axial thrust
Candidate Info
1
year in workforce
1
year at this job
MS
Construction Management
Civil Engineering
Front End Planning
Project Engineer Intern
- Worked as an assistant to the Project Manager in a $200M mixed use construction project
- Managed sub-contractor bids, project coordination with owner, city officials, and subs for timely delivery of the project milestones
- Reviewed, Tracked and managed change orders, RFIs, submittals, & coordinating with the architects for drawing revisions and updates
Candidate Info
2
years in workforce
2
years at this job
AS
Natural Science
BS
Electrical Engineering
Electrical Engineer Intern
- Work under Professional Engineers (PE) supervision to assist with creation of utility system assessments for our clients to properly maintain and upgrade their facilities
- Trusted with co-lead for a project and developed a scope-of-work to help our client determine cost of electrical utilities
- Identified electrical equipment discrepancies/issues through field inspections and use of electrical as-built
- Assist with creating and installing warning labels on electrical equipment to ensure clients safety
- Utilize CAD software to engineer oneline diagrams and distribution maps for commercial residential and industrial vicinities
- Collaborated weekly with engineers to complete projects on time and to specification
- Participated with raising awareness of Arc Flash Hazards by creating a visual for employees to read and understand
Candidate Info
3
months in workforce
3
months at this job
MA
Industrial Engineering
Manufacturing Engineer Intern
- Assisted Engineering team that manufactured Missile fins by Injection Molding process using thermo-plastics.
- Mold filling, controlling the process flow of a hot molten polymer in to mold network.
- Conducted online inspections, grading, Process validation, troubleshooting, and final product inspections.
Candidate Info
5
months in workforce
5
months at this job
BA
Biological Sciences
MA
Computer Science
Software Engineer Intern
- Worked independently to fix customer reported bugs (Objective-C and C++).
- Used Visual Studio and Xcode to refactor code and add requested functionality.
- Collaborated with the Development team to implement iOS Bluetooth printing feature for customers (Objective-C).
- Modified existing solution working for Zebra Bluetooth printers to create a generic
- Assisted members of the Professional Services team to create documentation for customers.
Candidate Info
1
year in workforce
1
year at this job
BS
Chemical Engineering
Software Engineer Intern
- Created Android application in Java that tracked and logged a robot's path and displayed it to Google Maps
- Implemented graph in Android to display robot usage over time using achartengine
- Developed a real-time embedded program in C allowing a robotic walker to detect being picked up, overcome obstacles, and brake
- Converted analog controller-motor communication to SPI on a Renesas microcontroller
- Synchronized a set of motors using CAN
Candidate Info
9
years in workforce
4
months at this job
MA
Master of Arts
MBA
Master of Business Administration
Mechanical
Software Engineer Intern
- Developed Route Planning System for order delivery using DBSCAN, MST, TSP algorithms and used D3.JS to visualize the routes
- Used Tungsten.js (based on BackboneJS) and PHP and applied MVC design pattern developed billing and payment module for Wayfair extranet user
- Developed Wayfair truckload shipment multi-stops visualization module
- Used Python to develop code generator to generate the full-stack PHP and JavaScript files and basic skeleton codes
Candidate Info
8
years in workforce
3
years at this job
BS
Electrical Engineering
Hardware Design Engineer Intern
- Reduced engineering hours 25% by spearheading product and system start-up, system integration support, and production optimization.
- Provides customer support and engineering through the performance of project engineering and long term local engineering support, on-site installation, as well as troubleshooting and repair of complex equipment and systems.
- Provides consultancy regarding the application of products, technologies, manufacturing processes and industry specific applications.
- Manufactures custom enclosures to meet UL, NFPA, and NEC requirements.
- Creates engineering schematics, layouts, BOMs, and NC files.
- Designs automation systems consisting of variable frequency drives, PLCs, and HMI.
Candidate Info
6
months in workforce
5
months at this job
BA
Major
Research and Development Engineer Intern
- Assisted in biomedical research and development for all technical (R&D, Application) and support (Supplier, Quality)
- Supported quality engineering team by following medical device testing protocols to perform software and hardware quality
- Collaborated with Application Engineers to manage solutions of product defects identified by senior quality engineering team
- Worked with Research and Development Engineer team that launched an all new product called the "[company name] Navigator, "
- Created content for [company name] Medical Table software with the Research and Development Engineering team through the utilization of production tools and 3D CAD modeling programs such as SolidWorks and Maya
- Supported Application Engineer team in interacting with new customers, performing on-site training of [company name] Medical
Candidate Info
3
years in workforce
7
months at this job
BS
Mechanical Engineering
Manufacturing Engineer Intern
- Designed and prototyped manufacturing tools
- Communicated and coordinated with multiple parties to organize work sequence
- Directed technicians with work order of satellite panel build
- Generated documentation reports for drawing errors and changes
- Utilized company databases to track hardware and facilitate receiving and installation
- Deconstructed and analyzed market remote-control speedboat
- Conducted CFD analysis on hull to determine optimal propeller placement
- Structured team collaboration with defined roles and documentation
- Applied principles of fluid mechanics and propulsion to convert speedboat into tugboat
Candidate Info
3
years in workforce
1
year at this job
BS
Electrical Engineering
Electrical Engineer Intern
- Utilized computer aided drafting (CAD) software to draw and modify designs, update records, verify drawings, prepare technical documentations
- Shadowed and assisted Electrical engineers in variety of upgrades and project activities
- Assisted Automation Engineer with modifying Siemens and Allen Bradley PLCs settings in Production line
- Directed Electrical Technicians and Contractors with installation and repairs to Electrical Equipments in Production line
Candidate Info
5
months in workforce
5
months at this job
BS
Industrial Engineering
Continuous Improvement Engineer Intern
- Created standard work instructions and operating procedures for manufacturing equipment
- Gathered work sampling and value-added data to assist in designing a new manufacturing facility
- Participated in a Kaizen event to create an efficient process layout for spool production
- Created process flow charts for the spooling, paint and controls departments
Candidate Info
1
year in workforce
1
year at this job
BA
Mechanical Engineering
MA
Mechanical Engineering
Mechanical Engineering
Test Engineer Intern
- Designed innovative equipment through hydraulics and electronic programming for testing new tractors
- Worked to improve environmental standard by testing tractor emissions
- Displayed leadership through developing and supervising test procedures
- Applied "Hands-On" training with power tools, welding, soldering electronics, fork-lift etc.
Candidate Info
3
years in workforce
6
months at this job
BA
Computer Science
BA
Social Science
Software Engineer Intern
- Worked as part of an Agile team developing 3D printing software in Ruby and Ruby on Rails
- Independently developed Ruby on Rails luncheon scheduling web application for site use
- Participated in software development lifecycle, including sprint planning, product demos, and CI and deployment
Candidate Info
1
year in workforce
8
months at this job
BS
Electrical Engineering Technology
RF Test Engineer Intern
- Assisted Application Engineers with characterization testing of RF products.
- Developed software for power glitch measurement.
- Hands on experience in amplifiers, attenuators, mixers, switches, variable gain amplifiers, modulators and demodulators.
- Hands-on experience with operation and programming of RF test equipment such as Network Analyzers, Signal Generators, Power Meters, Pulse Generators, Oscilloscopes and Spectrum Analyzers.
Candidate Info
6
months in workforce
6
months at this job
BS
Computer Science
Software Engineer Intern
- Manually tested automotive radars and individual pieces
- Developed test cases to test software embedded in radars
- Debugged embedded software using JTAG debugger
- Documented results and more efficient techniques for developing, debugging and testing
Candidate Info
1
year in workforce
6
months at this job
BA
Information Engineering, Economics Minor
MA
Accounting And Information System, Information System Option
Assistant Engineer Intern
- Assisted Senior Engineer in testing, troubleshooting and implementing products, including electrical distribution and low/high voltage switchgear
- Interfaced with clients, hold technical presentation and training section
- Maintained the products database on daily basis and provided monthly report to the manager.
Candidate Info
1
year in workforce
3
months at this job
BS
Engineering Management
Design Engineer Intern
- Communicated with project managers on the design and operation of storage tanks under the guidance of a professional engineer
- Reviewed engineering drawings to find calculation inconsistencies
- Became familiar with multiple building and design codes
Candidate Info
2
years in workforce
8
months at this job
BS
Mechanical Engineering
MS
Mechanical Engineering
MA
Business Administration
Mechanical Engineer Intern
- Implemented edge detection algorithms to detect surface defects on turned metal parts
- Designed a vision inspection system to check defects on the small components of Fuel Injectors
- Worked with the vendors to evaluate and select components for setting up a Machine Vision Lab
Candidate Info
7
years in workforce
6
months at this job
AA
Business Administration
BS
Structural Engineering
Project Engineer Intern
- Assisted with Take-Offs and tracking costs on a daily basis
- Used Bluebeam to record RFIs and Submittals
- Communicated with Structural Engineer and Architect on technical details
Candidate Info
4
years in workforce
4
months at this job
AS
Information Systems
BS
Telecommunications Engineering
MS
Software Engineering
Software Engineer Intern
- Implemented Bayesian Classifier in Java.
- Helped to design a scoring scheme for our API results.
- Automated API scoring using Java and JMeter.
- Implemented and improved duplicates detection algorithm in Java.
- Automated defects' registration and initial analysis by using Java and libraries for Hive, and Rally API.
- Created spec and build.xml files for RPM release in Linux.
Candidate Info
4
years in workforce
6
months at this job
BS
Physics, Mechanical Engineering
Mechanical Engineer Intern
Mechanical Engineer Intern
- Use AutoCAD to modify HVAC systems.
- Analyze possible distribution of piping on floor plans.
- Work with different departments (electrical and mechanical) to provide a solution to a problem.
- Trace piping & duct work from blue print to AutoCAD.
- Work along engineers to ensure all markups are done correctly and prepare drawings for submittals.
Candidate Info
1
year in workforce
7
months at this job
BS
Civil Engineering
Project Engineer Intern
- Worked with Project Managers in the development and revision of work scopes and site specific work plans.
- Prepared contracts for subcontractors.
- Prepared close-out documents and manuals.
- Reviewed submittals.
- Logged drawings and specifications.
- Submitted, tracked responses and issued Requests for Information.
- Created subcontractor contact log.
Candidate Info
3
years in workforce
5
months at this job
BS
Chemical Engineering
Project Engineer Intern
- Maintain project documentation, including drawings, specifications, soil reports, inspector reports, and request for information's
- Coordinate submittal process, including tracking, reviewing, resubmitting, and monitoring procurement
- Assist Project Manager with documenting subcontracts and change orders, job costing and forecasting
- Attend and record minutes for owner meetings, subcontractor interviews, coordination meetings, and safety meetings
- Manage project close-out process
- Consistently demonstrate company values while seeking to improve through personal and professional development
Candidate Info
1
year in workforce
10
months at this job
BA
Automotive Engineering
MA
Master of Arts
Product Engineer Intern
- Working as a product engineer intern to support VW 416 engineering team: both IP and Trunk Trim
- Managing all the Data Transfer between VW and YFAI via KVS system after checking the validation
- Creating parts history tables to keep the data up to date and updating the BOM
- Creating the measuring plan for trunk trim parts
- Analyzing the draft angle to check if meets the minimum draft angle requirement for the grain.
- Implementing engineering change in terms of CATIA, like hole or rib adjustment, surface offset, etc
- Helping team to track the project process and work as a coordinator between YFAI and Suppliers.
Engineer Intern Resume Success Stories
