- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
CNC Programmer Resume Samples
No results found
Candidate Info
years in workforce
years at this job
Machine Technology
Management Information System
Mechanical Engineer
CNC Programmer
Responsible for developing CNC programs from customer's blueprints and specifications using CATIA V5 and MasterCam.
- Performed on-site program upload and set-up for machining centers; Mazak M-30 lathe with Fanuc control, Hitachi VK45 with Haas control.
- Responsible for maintaining, upgrading, and documenting company's CAD/CAM packages.
- Managed company's tool library and prepared procurement requests.
- Provided help and training to operators.
- Developed various rapid tooling strategies to shorten machining cycle and increase efficiency.
- Created and documented various high efficient machining cycles and sub-programs.
- Successfully accomplished duties to received yearly rewards from the owner.
Candidate Info
years in workforce
years at this job
High School Diploma
CNC Programmer and Large Grind & Shop Manager
CNC Programmer / Process person for 53 CNC Machines including Mills, Lathes and Swiss machines.
- Proficient with Fanuc, Macro B, Okuma, Mitsubishi, and Siemens controls
- Interpreted designer models; wrote and optimized CNC programs to create complex parts
- Created programs to control the operation sequence and cycling of CNC milling and turning centers.
- Program correct operational sequences, tooling changes, machine movements, & cycle speeds.
- Collaborated with Tool & Mold Makers, and CNC Operators as required to resolve any problems.
- Specified tooling appropriate for the operations programmed and Interpreted/ Edited G-code programming.
Candidate Info
years in workforce
year at this job
Mechanics I And
CNC Programmer
Programed FADAL VMC-3016 and Krile XPG-12-41 using manual G-code.
- Set up an operated FADAL VMC-3016 and Krile XPG-12-41.
- Conduct trial runs to prove programmed instructions.
- Revised and directed revision of existing programs to increase operating efficiency and adapt to new requirements.
- Compiled and wrote documentation of program development and subsequent revisions.
- Developed tool set up sheets and work instructions
Candidate Info
years in workforce
years at this job
CNC Programmer/setup/machinist
Wrote programs for any type of CNC machines in shop, generated 2D and 3D programs by CAD/CAM, SmartCam, and Mastercam base on design
- Know how to open Solid-models, Step-files, Iges-files, Read blueprints, sketches, drawings, GD&T, created geometry
- Created all surfaces such as ruled surfaces, lofted surfaces, revolved surfaces, offset surfaces, swept surfaces, net surface, draft surface, extrude surface, fillet surface, trim surface, etc.
- Modified tools then coded for CNC (able to code any type of CNC) last step need to double check on CNC programs read out, make sure everything's O.K, created detail set-up sheet, tool lists and operated CNCmachines.
- Made parts, fixtures, cavities, engravings, 2D, 3D molding for plastic pipe fitting
- Measured and checked products as cavities, molds, parts for correct shapes, dimensions and other specifications using Micrometer, Vernier caliper, Depth-micrometer, height gage, surface plate, Optical comparator etc.
- Regained and repaired machine tools and parts. Helped other people to set up, operate CNC machines, solved any problems in shop.
Candidate Info
months in workforce
months at this job
Mechanical Engineering
Manufacturing Engineer/cnc Programmer
Learned new software in less than 2 weeks to create over 80 programs for lathe and milling operations.
- Worked with Senior Programmers to develop new programming techniques to establish quicker cycle times and reduce tooling costs.
- Constructed tooling and fixture designs to be incorporated into machine layout of part placement inside horizontal mills.
- Challenged to create concrete processes to enable parts to be fabricated from beginning stages of development all the way to shipping to the customer.
- Worked with many types of materials such as Titanium, Aluminum, Brass, Surgical Plastic, and Stainless Steels.
- Taught class one and class two machinists on proper machining methods and appropriate procedures to complete jobs by proposed deadlines.
- Programmed Mazak Mill/Turn centers using MasterCam X2 software and Conversational methods.
Candidate Info
years in workforce
years at this job
CNC Programmer
Responsible for programming 3-axis, 4-axis, and 5 axis CNC Mill machines
using HSMWorks in Solidworks 2014 and MasterCAM V9.0, and X5, and X8.
- Maintained all CNC programs and ensured accuracy of all instructions through comparison with original blueprints.
- Analyzed and recommended all cutting tools with the proper speed and feeds for CNC programs.
- Responsible for machining and operating titanium, Inconel, aluminum, and stainless steel material.
- Designed and fabricated tooling and fixtures due to machining requirements.
- Set up HAAS (5-axis UMC-750 and 4-axis VF-4), Quantum, Matsuura, and
- Provided set-up sheets and instructions to machinists.
- Trained and instructed operators/machinists to operate machine tools.
- Responsible with close tolerance +/- .001.
- Participated in brainstorming/problem solving with engineering and production personnel to solve related problems.
Candidate Info
years in workforce
year at this job
CNC Programmer
Responsible for programming 3-axis, 4-axis, and 5 axis CNC Mill machines
using HSMWorks 2014 and MasterCAM V9.0 and X5.
- Maintained all CNC programs and ensured accuracy of all instructions through comparison with original blueprints.
- Analyzed and recommended all cutting tools with the proper speed and feeds for CNC programs.
- Responsible for machining and operating titanium, Inconel, aluminum, and stainless steel material.
- Designed and fabricated toolings and fixtures due to machining
- Set up HAAS (5-axis UMC-750 and 4-axis VF-4), Quantum, Matsuura, and
- Provided set-up sheets and instructions to machinists.
- Trained and instructed operators/machinists to operate machine tools.
- Responsible with close tolerance +/- .001.
- Participated in brainstorming/problem solving with engineering and production personnel to solve related problems.
Candidate Info
years in workforce
years at this job
Information Systems
CNC Programmer
Operated CNC routers, optimized, and debugged the CNC programs to reduce waste. Consecutively was promoted to team leader in charge of the CNC department, and then promoted to CNC programmer due to my performance in the area.
- Trained operators in blue print reading, and machine operation basics.
- Design and implemented new part holding techniques, and tooling to increase throughput.
- Researched, and Implemented new software for the machining cell to increase productivity and overall efficiency.
- Was rewarded, and recognized multiple times for my contributions to the company
Candidate Info
years in workforce
years at this job
Business Administration
Technology Program
CNC Programmer
Collaborate with engineers to explore best options in design and development of blueprints and parts
- Assisted customers in designing tools that met both purpose and price point
- Created new tools using precision design software while ensuring quality and delivery timeliness
- Maintained detailed spreadsheets for tracking productivity
Candidate Info
years in workforce
years at this job
Associate of Science
Food Technology
Processing CNC Programmer
Gathered and maintained documents from Engineering Designer and Project Manager to create Part Router for projects
- Updated all documentation changes for production due to MCN/ECN's
- Ability to utilize CAD software to edit, draws, and design complex parts for programming
- Generated, updated and revised CAD drawing for effective transference to a CNC program
- Generated CNC programs from various software packages to nest patterns and cut various material to specific dimensions
- Interfaces with Design Engineers and Project Managers to work through any issues identified, and to reduce material waste
- Coordinated the generation Bill of Material for processing and revision of programs, tool list, cut lists and job set- up sheets for processing operations as part of the Job Confirmation process
- Created and managed program history for production
Candidate Info
years in workforce
years at this job
High School Diploma
CNC Shop Forman, CNC Programmer, CNC Tool Purchaser
Operated five CNC machines and programmed 6 machines.
- Managed 16 shop employees
- Weekly meetings, scheduled parts on and off machine.
- Scheduled tooling for resharps, served as main contact person for machine shop.
- Increased productivity consistently over 11 years.
Candidate Info
years in workforce
years at this job
High School Diploma
CNC Programmer/supervisor
- Learned CNC lathe setup and programming within first year of work as an operator
- Was promoted to a high position in the company after displaying leadership abilities within the first year
- Produced tens of thousands of high quality fittings for various aerospace distributors
- Maintained high attention to detail and care for parts among co-workers
- Trained new operators to effectively run parts, check dimensions, and deburr sharp edges on parts with various techniques
Candidate Info
years in workforce
years at this job
CNC Programmer / IT Apprentice
Utilized Radan Cam software to produce CNC g-code for a Trumpf Punch & Laser.
- Established cost saving initiatives to ensure reduction of time and decrease of scrap metal.
- Increased personal efficiency through use of macros and Microsoft Office.
- Collaborated with IT to diagnose computer malfunctions, install software, map drives, create scripts, and maintain network functionality
- Provided assistance to fellow staff with general PC questions.
Candidate Info
years in workforce
years at this job
Machinist/cnc Programmer
Maintained and support systems for fabrication shop.
- Performed programming of distinctive CNC machines.
- Research and evaluate technology solutions for improved systems operations
- Created specific verification methods and comply with system procedures (ISO-900)
Candidate Info
years in workforce
years at this job
Drafting And Design Technology
Technology
CNC Programmer/estimator
Experience with SolidWorks/CamWorks for 5 years.
- Estimated how much raw material, labor, machine time, tooling, fixtures, and inspection time for accurate production job costs.
- Designed and produced all 3D Cad models, and holding/clamping fixtures.
- Produced CNC programs for lathes, lathes with live tooling, horizontal and vertical mills to produce fixtures and close tolerance parts.
- Reported to management for weekly CNC production meetings to discuss time, workloads, and scheduling.
- Debug and troubleshoot all CNC programs, and setups to run more effective, to cut costs, increase productivity, and machine time.
Candidate Info
years in workforce
years at this job
Design And Drafting
CNC Programmer
Created CNC programs for machining plastic parts using the GibbsCAM Software
- Reviewed customer supplied documentation and solid models for inconsistencies
- Confirmed the availability of tools required to machine the part to customer specifications
- Revised and updated older CNC programs to the current production methods
Candidate Info
years in workforce
years at this job
Mechanical Design
Mechanical Engineer/cnc Programmer
Analyzed current company software to determine what software was needed to increase company efficiency.
- Created customer designs using Solid Works & Space Claim 3-D solid modeling software.
- Produced Nesting programs using P.E.P. Technology CNC software to be utilized universally by machinists to precisely cut materials.
- Converted customer design requests using P.E.P. Technology CNC software for tool path cutting.
- Supervised shop floor employees, addressing machinist's problems with machinery and software.
- Provided excellent customer service in preparing shipments, receiving shipments, and in accurately transcribing information received over the phone.
- Assisted the sales department with customer product designs, performing quotes and addressing design issues.
- Coordinated customer orders to be processed in a timely and convenient manner.
- Created software specific to the following machinery: water jet, plasma, flame and laser cutting machines for 3, 4, and 5 Axes using the P.E.P. Technology CNC software.
Candidate Info
years in workforce
year at this job
Information Technology
CNC Programmer/supervisor
Programmed Mill-Lathe-VTL using NX-Cam for 2, 3, & 4 axis machines
- Programmed ABB And Fanuc Material handling Robots Using Robot Studio
- Organized database for old and outdated programs
- Generated Cad 3d models to compare function and fit with Solidworks
- Machined Titanium, Inconel, and different exotics for aerospace components
Candidate Info
years in workforce
years at this job
GED
CNC Programmer/ Autocad Drafter
Effectively created and designed manufacturing drawings in AutoCAD for a full-service exhibit marketing business.
- Created drawings for client approval and for various vendors for custom exhibits.
- Worked with the Engineering Department for the development and production of parts.
- Produced machined parts to production drawing specifications by programming, setting up, and operating a computer numerical control (CNC) machine.
Candidate Info
years in workforce
years at this job
Electrical Engineering
CNC Programmer/set-up
Create CNC programs using Mastercam CAD/CAM software to machine very tight tolerance parts for the medical and aerospace industries.
- Created 3D models from part prints using Mastercam Solids.
- Setup and operate Doosan VMC with rotary, Fanuc controller.
- Select and order tooling to machine stainless steels.
- Setup and utilized E2 Shop System to track employee hours, quantities produced, inventory management, scheduling, etc.
- Supervise and schedule machine operators to ensure quotas were met.
- Provide estimated machine times and requirements for part quoting.
- Invented a patented, hidden deck fastener for the building industry.
Candidate Info
years in workforce
years at this job
Shift Leader and CNC Programmer / Machinist
Responsible for programming, setup and operation of Multi Axis Live Tooling CNC Lathe and CNC Mill
- Utilized programing and manufacturing knowledge to simultaneously run multiple machines
- Programed one-up and production parts
- Inspected parts upon completion of production including shear test and other stress test
- Trained new employees on programming, machine use, shop safety and general company information
Candidate Info
years in workforce
years at this job
Technology Management
Fabrication Manager/cnc Programmer
- Worked with employees to continue skill building as well as reinforce a positive work ethic and camaraderie.
- Collaborated with fabricators, and management to ensure the workload can be completed day to day.
- Championed lean manufacturing; produced documentation simplifying complex machine setup.
- Using CADD programs, created CAM file for the CNC, from drawings, measurements, and patterns.
Candidate Info
years in workforce
years at this job
Mechanical Engineering
Automated Manufacturing Engineering
Manufacturing Engineer / CNC Programmer
Develop and prove CNC programs to manufacture parts and assemblies.
- Develop new ideas to reduce cost to the manufacturing process.(Fixtures, standardized tool list, new technology)
- Order tooling to reduce cost and improve productivity and increased profitability. (thread milling of all NPT threads)
- Selected and implemented new setup procedures to reduce setup cost
- Design experience working with AutoCAD, Inventor and Master Cam
- Utilized probe on milling machine to reduce setup time and increase higher quality parts
- Produced high volume bearings using variable programming and SPC to predict changes in offsets to maintain CPK value (Smart Car)
Candidate Info
years in workforce
years at this job
Mechanical Drafting
CNC Programmer
Use AutoCAD to program water jet cutting machine.
- Operated water jet cutting machine.
- Developed and maintained strong customer relations.
- Collaborated with clients in the design of the desired products.
- Responsible for training new staff on AutoCAD, water jet machine, forklifts and over-head cranes.
Candidate Info
years in workforce
years at this job
CNC Programmer
Write and optimize CNC programs to create complex parts on Itaya wire forming machines
- Create and compile necessary documents to aid in setting up machines
- Design, manufacture and set up tooling per specific project/customer requirements
- Estimation of new products including materials, tooling, setup and run rates for quotation
- Integrate work with Engineering, Production, Quality, Purchasing, and Scheduling Departments to ensure a smooth flow of quality products through the factory
- Create three dimensional models and two dimensional technical drawings of newly designed tooling and assemblies
Candidate Info
years in workforce
year at this job
Industrial Design
Construction Management
Cad Operator / Cnc Programmer
Engineering and drafting assembly drawings of refrigerated food display cases and food service counters.
- Restored CNC Drill block to full operation and developed standard for use, allowing hardware to be installed in a fraction of the time and with greater accuracy.
- Developed labeling procedure to expedite sorting of laser cut parts from subcontractor
- In process of streamlining CNC programming process for use with Solidworks
Candidate Info
years in workforce
years at this job
Me/cnc Programmer
Successfully leads the operations in the grind sell with 12 different grinders
- Work closely with all operators and team leads to maintain productivity in grind cell
- Work closely with team lead to repair and refurbish fixturing and tooling that was out dated
- Successfully implemented new grinders and trained operator to full production status
Candidate Info
years in workforce
years at this job
Powerplant Technology
Machining Technology
Self-directed Work Teams
CNC Programmer
Produce G-code machine programs using Mastercam, AutoCad, Solid Works, OMAX, and IGEMS software to manufacture Aircraft interior parts on CNC machining centers and waterjet machines in accordance with engineering drawings and solid models to satisfy customer purchase orders within Lean Manufacturing and 6S guidelines. Check all incoming purchase orders for revision changes, interpret engineering drawings, and produce CAD drawings.
- Assist CNC machinists and waterjet operators in troubleshooting machine programs.
- Analyze manufacturing processes for maximum efficiency
- Assist engineers in design and production of prototype parts
- Design production fixtures and create machine programs to manufacture them
- Execute principles of Lean Manufacturing, 6S, and Continuous Improvement
Candidate Info
years in workforce
year at this job
Engineering Technology
CNC Programmer
Programming aerospace parts for production department using MasterCam (Version 9.1 and X3) and 4 and 5 axis machines
- Maintained documentation of CNC programs, process, and tooling records Manufacture heat sink & cold plates, vacuum brazed parts, etc.
- Working mainly with Aluminum making vacuum fixtures and tooling for production
- Programming parts from solid models and working with operators to assure parts inspection for first article
- Manufacture parts for companies such as: Raytheon, General Dynamics, Lockheed Martin, etc.
Candidate Info
years in workforce
years at this job
CNC Programmer/machinist
Utilized Unigraphics NX software to model and program prototypes, fixtures and small production runs
- Provided manufacturing support to Engineering, Dynamometer cells, and Engine assembly
- Program, Setup and operation of Haas Vertical and Horizontal machining centers from 3 to 5 axis
- Program, setup, operate 2 axis CNC Lathes
- Used manual Lathes and Mills, Surface Grinder, Tumblers, and Grinders to accomplish tasks
- Used Micrometers, Calipers, Bore gages, CMM (manual) and Air Gages to inspect parts
Candidate Info
years in workforce
years at this job
CNC Programmer
- Wrote CNC programs for 3 types of controls using AutoCad and NC Polaris (CNC programming software).
- Used verification software with programming system to reduce scrap from programming problems.
- Developed variable programs for machining family of parts reducing setup time at CNC.
Candidate Info
years in workforce
years at this job
Certificate
CNC Programmer
Programming 5 Axis CNC Routers using Mastercam X6
- Setup of 5 Axis CNC Routers in a proficient timely manner
- Verify programs produce parts in the most efficient way possible
- Insure all parts meet quality standards at all times
- Assist in the scheduling of jobs to maximize product flow through areas
- Assist press brake operators with initial runs to guarantee all dimensions are within customers' expectations
- Designing and manufacturing work fixtures to insure accurate consistent machining processes
Candidate Info
years in workforce
years at this job
Tooling & Machining
Certificate
CNC Programmer/machinist
Programming, set up- operation, tooling, adjustment & editing programs for Moriseiki 5 axis HASS milling 4 axis machines and a Chiron Vertical Milling machine.
- Produce parts for surgical devices utilized for knee surgery, etc.
- Produce parts for aerospace.
- Use of a Smart Scope & CMM to review and double check precision of parts.
- Work with engineers, QA and fellow team members to ensure a high quality end product.
- Maintain accurate paperwork, calculation and designing of new products.
Candidate Info
years in workforce
years at this job
CNC Programmer
I hired into [company name] as a full time Programmer for much needed programming support in the GEMS (General Electric Mechanical Systems) Department that manufactures Landing Gear Actuator Pistons and Cylinders for the Boeing 787 and Airbus A380. After a couple of months of programming support I was given an opportunity to program a larger actuator cylinder very similar to other larger actuator cylinders in the department and program it the way I thought the cylinders should be programed on the Mill Turns. The resulting drastic reduction in program run times, much higher quality and the ease on the operators to manufacture the product launched a reprocessing effort across the whole department.
- Reprogramming of the larger actuator cylinders alone reduced finishing programs cycle times on average from 14 hours to less than 4 hour across the board for over a 70% reduction in run times.
- The company that was out sourced for turnkey programs for the GEMS department relinquished no source files so reprocessed programming was based solely on my personal machining strategy, tool selection and machining experience.
- As a result of my programming capabilities shop wide the programming support staff of four for the phoenix division was reduced in time to just myself. Reprogramming of the GEMS Department also eliminated very costly machine repairs and downtime due to machine crashes.
- Consumable tooling costs were reduced by about 45% and hand finishing labor hours were also drastically reduced.
- Machine Tools in the GEMS department consisted of 2 Mori Seiki NT4250 8 Axis Dual Spindle Mill Turns with Steady Rests and 2 NT3200 9 Axis Dual Head Dual Spindle Mill Turns with Steady Rests, 2 Mori Seiki NL2500 Dual Spindle 6 Axis Lathes with Steady Rests and Live Tooling and a Mori Seiki NL3000 Lathe with a Steady Rest.
Candidate Info
years in workforce
year at this job
CNC Programmer
Responsible for programming 4 Doosan Vertical Milling Machines(4 axis) using Gibbscam
- Held parts to specific tolerances, 1st piece inspections and quality checks.
- Responsible for programming 2 Doosan Lathes.
- Responsible for all quotes that come through the shop.
Candidate Info
years in workforce
years at this job
CNC Programmer/setup/operator
Read and interpret blueprints and diagrams accurately in both standard and metric, including mm to inch conversion if necessary.
- Assure part accuracy from start to finish of a job, including first run inspection using precision measuring instruments such as, calipers, micrometers, height gauges, depth micrometers, optical comparator, go-no go gauges, and radius gauges.
- Program both CNC Lathes and Mills on a conversational programming interface. Setup all tooling and fixtures. Edit written program and adjust tooling offsets to maintain part accuracy to .001 when needed.
- Fabricate custom tooling for Lathes and Mills when necessary using milling machines and grinders.
- Setup and operate various manual Lathes.
Candidate Info
years in workforce
years at this job
Business Management Program
Manufacturing Engineering Program
Cnc Programmer
Write programs from scratch and support the programmer as the lead in all programming issues and perform training and back-up support
- Coordinate with CNC operators to establish procedures for proper operations
- Facilitate the flow of work and resource requirements within the shop floor to meet requirements
- Develop and implement new methods of programming or manufacturing to improve quality and reduce cost
- Supply positive leadership to the Machining Department
Candidate Info
years in workforce
months at this job
Cnc Michinist
CNC Programmer/machinist
Program and operate Nagata 1000 series machines - Program jobs, load and unload fixtures, indicate fixtures so the parts are parallel to machine
- Set up tooling for prototype parts Proof out new programs weekly
- Designing fixture and tools for prototype and new production parts
- Rework parts with machine
- Read CMM printout and make moves according to it
Candidate Info
years in workforce
years at this job
CNC Programmer
- Skilled at project planning to determine sequence of operations for machined parts.
- Ability to work from engineering drawings, sketches, virtual models Solid Works, Pro Engineer, Catia, or verbal instructions.
- Use of Gibbs Cam, software to generate programs CNC code / create complex 3D tool path, Rotary Mill, 4th Axis advance Mill, Fadal, Haas, Okuma B4000h Horizontal and Vertical Mill, Multi Spindle CNC Lathe, Live Tooling, Mori Seiki big bore ,Doosan , Okuma Osp200,Haas,CNC Lathe machines.
- Experience with CNC and manual machines, lathe, mill, drill press, grinder, disc sander and other standard shop tools
- Design and fabrication of fixtures and tools required to perform complex machining operations.
- Familiar with ASME Y14.5M-1994, ASNI Y14.5-1973 symbols.
Candidate Info
years in workforce
months at this job
High School Diploma
CNC Programmer/operator
responsible for machining custom parts for the pump industry on CNC Lathes
- set up, operated and programmed Mori Seiki CNC lathes using CAPS software
- read and interpret blueprints
- performed first piece inspections using micrometers, calipers, bore guages, and dial indicators
- worked mainly with cast iron, and some stainless steel
- knowledge of G and M codes, feeds and speeds, and offsets
Candidate Info
years in workforce
years at this job
Requirements
CNC Programmer / Operator
Interpret engineered drawings to create templates for; brake press, roll, saw, cnc, cam, plasma machine operators, and torch cutters
- Access cad drawings to determine various dimensions to clarify instructions for machine operators, torch cutters, and QC
- Operate Auto-Cad with Quik Cam software to modify and convert drawings to dxf or mpg files to be cut on cnc, cam and plasma machines
- Operate Auto-Cad with ProNest software to utilize material by creating nest for cnc- plasma machine
- Draw or design necessary parts using Auto-Cad that are not available or accessible in the network drawings for production
- Use various Microsoft Office software to produce documents needed for daily HS&E or department meetings
- Operate cnc- plasma machine or other machines when necessary to meet production
Candidate Info
years in workforce
year at this job
CNC Programmer/machinist
Able to set up operate and program manual and CNC machines
- Familiar with LEAN manufacturing system and 5S. Facility was ASI 9000 certified
- Set up, adjust, and operate all of the basic machine tools and many specialized or advanced variation tools to perform precision machining operations
- Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
- Revise programs and/or tapes to eliminate errors, and retest programs to check that problems have been solved.
- Analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and design data in order to calculate dimensions, tool selection, machine speeds, and feed rates.
Candidate Info
years in workforce
years at this job
Electronics Engineering
CNC Programmer
- Wrote CNC programs for turret presses
- Responsible for drawing product stamps and accuracy of labels
- Operated strippet and wideman turret presses
- Purchased turret tooling and die setter tools for facility
- Quality assurance inspector ensuring final product met or exceeded company standards
- Forklift operation and material handling
Candidate Info
years in workforce
months at this job
Manufacturing Engineering And Mechanical Design
Industrial Engineering
CNC Programmer/ Machinist
Interpret and analyze engineering sketches and drawing.
- Define all reference points and machine paths through calculating dimensions and design machine sequence.
- Create CNC programs illustrating the requested product
- Install and maintain the cutting tools and fixtures to produce desired goods
- Study blueprints and adjust the programs accordingly to prevent discrepancies
- Verify the produced CNC programs are in compliance with quality requirements and optimized to reduce time, cost and utilize raw material in the best interest of the company.
- Inspect the product to make adjustments if needed.
Candidate Info
years in workforce
years at this job
High School Diploma
CNC Programmer
Design cabinets for campers, trailers, and toy haulers.
- Create 3D nesting using Router CIM for CNC Routers.
- Measure unit with accuracy to obtain dimensions for drawings.
- Create blueprints for company shop in order for production line to assemble the units.
- Improve productivity to easy assemble units using tabs, dados, packet cutouts, and decrease time amount for cabinet assembly.
- Supervise CNC Department.
- Train CNC operators regarding safety, machine set-up, machine operations, machine maintenance.
- set up Onsrud, Weeke and AXYZ routers
Candidate Info
years in workforce
years at this job
Applied Science
CNC Programmer
- Responsible for creating the process and programs for new parts along with all fixtures
- Program and run prototype parts
- Responsible for updating and improving old programs and processes
- Expected to train and develop new programmers and operators
- Develop and maintain 5S and LEAN initiatives
Candidate Info
years in workforce
years at this job
Mechanical Engineering Technology
Mechanical Drafting
CNC Programmer/machinist
Program thermoform and cold form tooling components using Mastercam.
- Machine tooling components using Hardinge 1000VMC and Techno-Isel CNC machines.
- Minor manual machine work on the Bridgeport and Jet vertical mill as well as the manual lathe.
- Create and revise mechanical drawings of tools used for production of miscellaneous components.
- Assist in the training of current and new employees on Mastercam and processes from request to completion and running of components.
- Write and update procedures for the programming and manufacturing of tooling components.
Candidate Info
years in workforce
years at this job
Accordance
Designer/cnc Programmer
Design for detailed design, generating parts lists (BOM) and specifications using SolidWorks 2014 3D
- Manage special projects and design confidential documentation per submittals
- Review and approve all prototypes prior to production
- Lead team to understand Fundamentals of Lean Manufacturing
- Support Quality Control Manager with plant layout, production fixtures and Lean Manufacturing
- Supervise team of 6 operators in Sheet Metal Department
- Troubleshoot AMADA EM2510 and automation tower
- Create .DXF files and generate CNC programs for AMADA EM2510 using Dr. ABE software
- Nesting creation that maintained 80% sheet utilization
- Provide training to CNC and Press Brake operators
Candidate Info
years in workforce
years at this job
Precision Machining
HAAS CNC Programmer, Setup
- Program Haas CNC machines using Featurecam and G-code.
- Featurecam Training Completed. HAAS Programming Training Completed.
- Setup 5 Haas CNC machines (TL2 Lathe, TL3 Lathe, TM2P (5axis) Mill, VF3Y Mill (5axis), ST30Y (Live Tooling) Lathe with ServoBar Bar feeder.
- Program, setup, modify G-code at machine, prove first piece for production runs.
- Train operators to complete production runs in a safely and efficient manor.
Candidate Info
years in workforce
years at this job
High School Diploma
Computer Networking
CNC Programmer
Programmed 5-axis router with MasterCAM
- Set up and ran two NW routers and a Komo router, all with Fanuc controls
- Ordered and stocked tools
- Responsible for maintaining and fixing Northwood and Komo machines
- Fixed design issues in AutoCAD
More CNC Programmer
Resumes
CNC Programmer Resume Success Stories
