- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
CMM Programmer Resume Samples
Filter:
No results found
Candidate Info
7
years in workforce
6
months at this job
CMM Programmer
- Responsible for all CMM programming and operations performed on CMM's
- Coordinated data files with Engineering and developed CMM programming and reporting standards.
- Trained personnel in CMM operator mode.
- Standardized program storage, reported storage, all file names and CMM features.
- Prepared backup CMM accessories probes, extensions and all phases of CMM hardware.
Candidate Info
20
years in workforce
6
months at this job
BBA
Bachelor of Business Administration
Bsme
Quality Tech / CMM Programmer
- Provided greater insight for machinist on the floor in the interpretation and use of GD&T
- Decreased time parts spent in quality by writing robust and streamlined programs
- Performed shop tool calibrations
- Made sound recommendations to management on best way to check parts based on how dimensions were called out and whether or not GD&T was being used
Candidate Info
8
years in workforce
1
year at this job
Mechnical Engineering
Site Manger/cmm PROGRAMMER
Operating Zeiss Eclipse CMM machine with Calypso software.
- Responsible for creating programs to inspect company parts and fixtures.
- Implemented revised Gage check procedures, PPAP's, Gage buy-offs, etc
- Supervised Gage technicians in facility
- Produced monthly reports documenting hours worked, gage calibrations, parts checked in lab, Gage R&R studies, SPC, FMEA, and CMM metrology
Candidate Info
8
years in workforce
4
years at this job
HS
High School Diploma
C
Mechanics
CMM Programmer and Operator
Quality Control Manager (oversee shop quality/final inspection)
- 3d Scan Chamber Molds/Cylinder Heads, then develop in Next Engine/Rapid Works
- Run and program Wenzel CMM (DMIS) machine with basic understanding of GD&T
- Run machines keeping strict tolerances on custom parts
- Extensive use with radius gages, blade/flat mics, calipers, scales, etc.
- Decreased machine run time and reduced scrap percentage in work area
Candidate Info
16
years in workforce
6
years at this job
Quality Management
Atec Engineering Inc
Lead Mechanical Inspector/cmm Programmer
- Operated Zeiss CMM equipped with Calypso and U-Soft software's, Optical Comparator and several other various hand tools.
- Performed detailed visual inspections on parts made of quartz and gold plating.
- Coordinated reverse engineering and calibration system.
Candidate Info
8
years in workforce
4
months at this job
BS
Management
Quality Manager / CMM Programmer
- Performed quality inspections to insure the quality of incoming and outgoing goods.
- Provided vision and leadership for corporate quality and strategic initiatives.
- Thorough understanding of metal fabrication including equipment, processing, materials including steel and coatings, industry standards, quality systems, and customer satisfaction.
- PC-Demis 2016 programming and operations
Candidate Info
13
years in workforce
13
years at this job
Cmm Programmer
- Write DCC CMM programs utilizing PC-Dmis CAD++ utilizing CAD data.
- Maintained gage calibration and certifications.
- Ran capability studies and studied process controls on production lines.
- Tracked production and performed in-process inspection on parts produced
Candidate Info
20
years in workforce
5
years at this job
HS
High School Diploma
AAS
Tool Design Technology
Mechanical Inspector/cmm Programmer/lead Inspector
- Programmed a Reflex Brown & Sharpe One CMM w/ PC-DMIS
- Programmed Zeiss CMM with U-SOFT software and manual inspection of machined & molded parts for aerospace and military contracts
- Helped company with ISO Certification and implementation of quality manual
Candidate Info
16
years in workforce
5
years at this job
Lead CMM Programmer
- Duties and responsibilities associated with A2LA accreditation such as semi-annual required testing, shop wide calibration and record keeping.
- Interpret GD&T to program and perform dimensional layout on parts, calibration and tuning of fixtures, tooling and other equipment as requested for in house and outsource work.
- Lab equipment utilized: Mitutoyo Bright with GEO Measure software and a Zeiss with Metrolog XG software along with various micrometers, calipers, height gauges, etc.
- When needed I would help the fixture builders machine, assemble and tune attribute a variable data fixtures.
Candidate Info
39
years in workforce
4
years at this job
C
Mechanical Desktop Solid Modeling
C
Advanced
C
Quality Management & Statistical Process Control
CMM Programmer
Aerospace machine shop
- CMM inspection QC5000. 1st articles, in-process, receiving & final inspection.
- Assist in RFQ process, contract review, create & or review shop planning, DCP P.O's
- Assure compliance to ISO 9001, AS9100-AS9102, ASME Y14.5 & Y14.41
- Create key characteristic inspection drawings for manufacturing/inspection personnel
Candidate Info
16
years in workforce
10
years at this job
Journeyman
CMM Programmer
- Program and Operate Brown and Sharpe machines using PC-Dimis 3.7 MR 3 and PC-Dimis 2014
- Inspect all parts ensuring they are made to print
- Inspect and Measure Checking Fixtures for correct build tolerances
- Work closely with Die makers and Customers to ensure accuracy of parts
- Responsible setting up and running ATOS 3D scanner
Candidate Info
7
years in workforce
11
months at this job
MA
Divinity
Management
CMM Programmer/operator
- Using CMM (PC-DMIS) and bench Inspection techniques to inspect first buy parts and complete First Article Inspections.
- CMM programming PC-DMIS (DCI)
- Using CATIA, created all needed inspection media (blueprints) to perform FAI inspection buyoffs. Constructed tooling and part models used for programming CMM.
- Track, monitor and complete all FAI’s using Net-Inspect (Net-Inspect Administrator).
Candidate Info
2
years in workforce
2
years at this job
CMM Programmer/ Quality Control Inspector
- CMM programming using PC-DMIS 3.5 Ver. Software
- Programmed parts with mold line data
- Inspected and verified certification of incoming material
- Performed line inspections
Candidate Info
4
years in workforce
2
years at this job
Quality Technician/cmm Programmer
- Learned to write CMM programs using LK Dmis Camio Studio software.
- Ability to edit CMM programs using UMESS software for Zeiss.
- Received certificate for Calypso Zeiss software basic training.
- First piece, final piece, and in process inspections.
- Set up gages for machine operators and aided in calibration.
- Trained operators to perform inspections using the various CMMs.
Candidate Info
11
years in workforce
5
years at this job
BS
Business Administration
Quality Technician/cmm Programmer
Operate / Write programs Calypso for CMM (Zeiss) systems
- Mainly focuses on hydraulics and air Fixture designs for CNC Machines
- Responsible for auditing multiple processes to ensure each part of the process in performing is within the allowed specification and / or tolerance, reading blueprints
- Openly work with manufacturing in process capabilities and improvements to positively impact new products being introduced
- Responsible for various documentations observed through audits, analysis, and other process improvements activities
- Use strategic troubleshooting and problem solving skills to solve issues that impact profitability
- Successfully communicate with all levels of personnel
- Effectively and efficiently manage critical details regarding measurement and translation of information into applicable processes
- Follow AS9100 procedures
Candidate Info
10
years in workforce
5
months at this job
HS
High School Diploma
CMM Programmer
Measure parts using Mitutoyo CMM with MCOSMOS, Brown & Sharpe CMM with GeoPak, height gages, calipers, pin gages, micrometers, radius gages, and optical comparator.
- Verify parts are within tolerance as stated on the print, and that cosmetics are within customer specifications.
- Create NCMR's for any rejects and place parts in MRB area.
- Maintain calibration records for production and quality departments using GageTrak.
Candidate Info
15
years in workforce
4
years at this job
Gd&t
CMM Programmer
- Write programs using Calypso and PC-DMIS software for raw and finished products.
- Inspect raw and finished parts for quality and made sure they compliant with standards and regulations.
- Responsible for quality checks per the customers' specification, read blue prints daily.
- Fluent with Geometric Dimensioning and Tolerance (GD&T).
- Use calipers, Micrometers, Height gauge, and optical comparator, Spectro max and Contour machine.
Candidate Info
4
years in workforce
2
years at this job
HS
High School Diploma
C
Business Management And Entrepreneurship
Quality Control Inspector /cmm Programmer
Write CMM programs to operate both manual & automatic CMMs
- Design and build/procure necessary programming and fixturing within budgets.
- Run CMM and other quality used equipment.
- Perform first piece, in process & final inspections on complex components with tight tolerances.
- Identify and reduce product quality issues caused by process variation.
- Ensure product is acceptable to blueprint tolerances and various specifications.
Candidate Info
20
years in workforce
5
years at this job
Cnc Programmer/cmm Programmer
Experience on using Brown & Sharpe CMM with PC-DMIS Software
- Conducted first-piece, in-process, and final inspections.
- Offline PC-Dmis Programming
- AS 9102 1st Article Inspection
- Catia V5-V6 and Unigraphics experience
- Read and interpret Drawings and Specifications
- Geometric Dimensioning & Tolerancing
Candidate Info
4
years in workforce
11
months at this job
HS
Computer Information Systems
HS
High School Diploma
Chief Inspector / CMM Programmer
- Locate, Document and Calibrate entire company's gages.
- Schedule external calibrations and create POs for billing.
- Complete FAI with approval processes for new parts and customers.
- Write programs for basic checks and 100 percent inspections on Hexagon PC-DMIS & Zeiss Calypso software
- Complete paperwork on final inspection checks before shipment
- Sign off on scrap reports for Non conformance using 5 whys and root cause analysis
- Ensure other inspectors follow SOP and safety protocols
Candidate Info
11
years in workforce
5
months at this job
AS
Management
CMM Programmer
Responsible for programming of Brown & Sharpe with PC-Dmis 2013 and 2014.
- Worked with Renishaw and Tesastar heads, stylus, and probes.
- Responsible for surface finish inspection using Mitutoyo and Mahr profilometers.
- Responsible for use of optical comparitors, height gage, and other inspection equipment.
- Positive material identification testing.
- Ability to read and interpret difficult drawing with all aspects of Gd&t.
- Inspection of manufactured parts used in aerospace, nuclear, oil, and gas industries.
- Wrote multiple part programs with loops and patterns.
- Wrote basic script and visual basic script in PC-Dmis and Excel
Candidate Info
27
years in workforce
3
years at this job
Q.c. Supervisor/cmm PROGRAMMER
Perform prototype, layout, first article, in-process and final inspection of quartz and ceramic semiconductor O.E.M. parts.
- Program Mitutouyo cmms for 100% automated inspection routines.
- Train inspectors on inspection techniques and product lines.
- Write non-conformance reports.
Candidate Info
4
years in workforce
8
months at this job
HS
High School Diploma
C
solidworks
BA
Mechanical Engineering
CMM Programmer
- Inspection process development, using SolidWorks along with PC-DMIS to solve complex inspections obstacles.
- Create inspection programs for Coordinate Measuring Machine (CMM) to check Medical Devices, using PCDMIS and GD&T drawing and model requirements
- Run the parts to generate FAI reports. Add pictures, comments, etc. To make the program easier to use by the operators.
- Assure CMM accuracy, repeatability and reproducibility thru various engineering methods.
Candidate Info
32
years in workforce
6
years at this job
HS
High School Diploma
CMM Programmer / Supervisor
- Program and operate CMM using PCDMIS 2015 software
- Create and report data / stats in excel 2010, utilizing datapage software
- Track all gage calibrations and hand tools using Gagetrak/Gagepack software
- Confirm all hourly departmental payroll time
- Schedule hours to support production and/or workload
- Use Laser scanner, Absolute romer arm, utilizing PCDMIS and Polyworks software
- Certificates in SPC, PCDMIS advance programming, MSA, GD&T
Candidate Info
8
years in workforce
6
months at this job
AS
Manufacturing Productivity
AS
Associate of Science
CMM Programmer/technician
Currently program all parts for entire convertible assembly
- Parts include: Brackets/Tension Rods/Full Assemblies/plastics
- Conducts all first articles, in-process as well as final and pre-final inspections
- Mostly Automotive industry
- Use 2 programs: PC-DMIS and OPENDMIS
- Higher difficulty GD&T knowledge and practice
- Use Iterative alignments and car body positioning
- Increase of inspection and machining terms and processes
Candidate Info
24
years in workforce
11
months at this job
Cmm Programmer
- Cmm programmer (PC Dmis software write program per blueprint requirements)
- Measure first article parts from Lathes, Mills, Conventional machining and grinding
- Final Inspect parts.
Candidate Info
9
years in workforce
1
year at this job
Mechanical Engineering
Cmm Programmer
- Write online/offline CMM program to inspect First Article from customer: Spirit
- Dealing with major machine problems: bad tooling, temperature change, shotpeen.
- Inspect and calibrate in-house tooling and outside tooling.
- Support CNC department for in-process production.
- Analyze, troubleshoot, and report to a ME to fix the problem.
- Write Non-conformance Report for the defects.
- Maintains the working area and equipment in a clean and orderly condition.
Candidate Info
9
years in workforce
2
years at this job
C
Aerospace Manufacturing
CMM Programmer/ Quality Manager
- In process inspections to monitor work going in and out of the machine shop.
- Experience with PC DMIS programming
- Operate Sheffield, Brown and Sharpe CMM's
- Operate Faro arm, programming with Farocam2
- Lead a productive team to maintain a quality product
- Prepare first articles to maintain a quality record
Candidate Info
9
years in workforce
2
years at this job
BA
Industrial Psychology
CMM Programmer/cmm Operator/quality Assurance Technician
CMM calibration and Inspection of Assembly Fixtures
- Write Turn Key CMM Programs for Repeat Parts Using MeasureMax
- CMM Inspection of First Article and In Process Parts
- Third Party CMM Inspection for a Wide Base of Customers
- Calibration of Company Gages for Production Use
- Set Up, Program, and Operate CNC Lathe
Candidate Info
52
years in workforce
2
years at this job
CMM Programmer, Tool and Gage Calibration and Q.c. Tech
- Required to verify all PPAP submittals from new and current suppliers using CMM, Optical Comparator, height gage, various hand measuring tools and visual inspection.
- This required full inspection reports and approvals through the Quality Department.
- Necessary to keep up with tool calibration for ISO and repair or order new tools as required, keep a Gage Track System up to date and be sure all hand tools, gage pins, thread gages, fixtures and required checking equipment were current and entered into the computer Gage Track System.
- Required to go out to the assembly and production lines to trouble shoot failures and non-conformities.
Candidate Info
11
years in workforce
2
years at this job
CMM Programmer / Quality Assurance
- Inspection of parts for Medical field with tight tolerances.
- First Article Inspection Report / Final Audits
- Inspection of Medical devices, Medical Implants and Surgical Drills
- In-process / Final inspection using CMM Vast XT and Vast XXT
- Analyzing data using QC-Calc (SPC Software)
Candidate Info
11
years in workforce
2
years at this job
CMM Programmer / Quality Assurance
- Inspection of parts for Medical field with tight tolerances.
- First Article Inspection Report / Final Audits
- Inspection of Medical devices, Medical Implants and Surgical Drills
- In-process / Final inspection using CMM Vast XT and Vast XXT
- Analyzing data using QC-Calc (SPC Software)
Candidate Info
9
years in workforce
3
years at this job
Quality Assurance Inspector / CMM Programmer / VMM Programmer
- Tested pre-production material to determine quality prior to production processes
- Rejected non-conforming materials
- Devised improvement strategies to reduce product error rates
- Read and interpreted blueprints, engineering documents and product specifications
- Operated and programmed CMM using Calypso 2014 and checked the dimensional accuracy of different products, molds, components, etc.
- Used many different measuring tools to check dimensional accuracy including calipers, height gages, micrometers, thread gages, visual texture standards, etc.
- Communicate drafting improvements with engineers
- Program and operate INexiv VMA
- First article inspections
- Use of ANSI/ASQ Z1.4 sampling standards
Candidate Info
10
years in workforce
7
years at this job
BS
Product Design & Development
BA
Safety Studies
QA Inspector / CMM Programmer
- First piece inspections for parts using a CMM and hand measuring tools such as a dial bore gage, groove micrometers
- In-process inspection during the machining of parts to ensure they meet print requirements using calipers and height gages
- Final inspections of parts to ensure conformance and quality.
- CMM programing of new parts to streamline data collection and production
- Communicate with engineers and customers to ensure product requirements are met.
- Knowledge of GD&T
- Wide range of hand held inspection tool knowledge. From calipers, disc micrometer, thread micrometers, disc micrometers
- Experienced with Coordinate Measuring Machines, profilometers, hardness testers, height gages, micrometers, calipers
Candidate Info
11
years in workforce
6
months at this job
Quality Inspector / CMM Programmer
- Conduct first article inspections on incoming parts
- Maintain all necessary quality records and documents
- Perform parts layouts and Gage R&R's
- Conduct inspection using CMM (Mitutoyo, Zeiss)
- First article inspection reports and CFA reports
Candidate Info
5
years in workforce
2
years at this job
HS
Mechanical Engineering
CMM Programmer / Technician
PC-DMIS programming - advanced skills.
- CMM usage - Hexagon DEA Mercury, Faro Arm and Faro Edge.
- DCC programming of complex parts.
- Assistance with PPAP (sampling).
- Programming, both with and without CAD models.
- Knowledge of technical drawings, including GD&T and ISO tolerances.
- Reporting and support to Manufacturing and Customers Department.
- Laser scanning, use of Hexagon Metrology CMS 106 scanner.
- Fieldwork - use of portable CMMs.
- Assistance with gauge and tool calibrations.
Candidate Info
24
years in workforce
8
months at this job
BA
Project Management
CMM Programmer / Site Coordinator / Pratt & Whitney, Columbus GA
- Utilize offline PCDMIS software versions to support inspection of rough, semi-finished and finished goods.
- Correlate findings with layout department
- Supervise team of Manufacturing, Quality Engineers on-site
- Point of contact for all quality related items
- Weekly meetings to discuss open issues and progress of team
- Point of contact for company headquarters and employees
- Create and implement standardization procedures
- NX 3D CAD
Candidate Info
13
years in workforce
2
years at this job
CMM Programmer/shift Lead
- CMM Programming and inspection
- Inspected incoming, outgoing and in-process parts and assemblies.
- Member of High Performance Team
- Delegates time off and time card verification
Candidate Info
10
years in workforce
5
years at this job
CMM Programmer/operator
- Perform layouts of fixtures and parts using the CMM (Coordinate Measuring Machines) and other devices.
- Provide layout support to the tool room for inspection of tryout samples, die sections, or reverse engineering
- Assist with Optical Comparator inspection.
- Create and modify CMM inspection programs for precision machined components, assemblies and tooling.
- Ensure all parts being measured are identified in a complete and correct fashion and all data are kept up to date as required and create various reports and manage data.
- Enter the layouts results onto the correct forms on the computer.
- Troubleshoot CMMs and recognize problems.
- Interpret and report dimensional results.
- Assist Quality Department with Blueprint Analysis.
CMM Programmer Resume Success Stories
