A&p Mechanic
Demonstrated total precision in servicing all power plants and accessories Bell 206, 427, 429, 430, S92, and AW 139 (Chevron aircraft)
- Removed and replaced aircraft and powerplant components that required bolting, torquing, adjusting, rigging, and safety wiring to include powerplant, and flight control removal/installation
- Troubleshot, repaired, cleaned, serviced, inspected, modified, replaced, and/or overhauled aircraft and aircraft systems using approved data to ensure airworthiness
- Ensured compliance with company polices and OSHA and FAA regulations
workforce
at this job
A&p Mechanic & Recruiter
Served as an A&P Mechanic and Mechanic Recruiter for this Atlantic Coast Airline (ACA) contractor
- Performed A, B and line checks on the Bombardier CRJ-200
- Removed and replaced of aircraft and powerplant components that require bolting, torquing, adjusting, rigging, and safety wiring to include powerplant, and flight control removal/installation
- Troubleshoot, repaired, cleaned, serviced, inspected, modified, replaced, and overhauled aircraft and aircraft systems using approved data to ensure airworthiness
- Used and operated ground support equipment, as applicable and if qualified, in a safe manner
- Assisted other employees in the performance of their job assignments through coaching, counseling, and guidance
- Interfaced effectively with members of management, other departments, and co-workers.
workforce
at this job
A&p Mechanic
Performed line maintenance on Airbus A320, A330, A340 and Boeing B737, B767, 777 and 787 VIP / Corporate Aircraft.
- Accomplished detailed and general visual inspections, troubleshooting, and repairs
- Removed, installed, rigged and repaired flight controls, engines, and landing gear
- Maintained hydraulics, pneumatics, fuel systems and mechanical components.
- Utilized proper technical documentation such as manufactures' manuals, component maintenance manuals, and blue prints.
workforce
at this job
Aircraft Electrician/a&p Mechanic
Performed phase maintenance inspections on Cessna 402, 310, and Citation 1 aircraft
- Troubleshoot faulty avionics equipment in order to diagnose and isolate the causes of equipment malfunction and affect repairs.
- Performed recurring IFR checks including altimeter, pitot/static checks, and transponder checks.
- Inspected, tested, adjusted, and repaired UHF/VHF communications, GPS, gyros, fuel quantity system, control panel, electronic instrument panel and standby instruments.
- Repaired, replaced and performed operational and preventative checks and alignments on aircraft flight controls.
- Tested avionic systems under simulated and actual operating conditions to determine performance, and airworthiness, using test equipment, such as oscilloscopes, digital meters and counters, while performing a test flight.
- Maintained and updated aircraft phase books, logbooks and other maintenance forms and records.
- Deployed to remote airfields for troubleshooting of downed aircraft and to repair aircraft using minimum ground equipment.
workforce
at this job
A&p Mechanic
Performed time scheduled maintenance at various depths of involvement from short check to heavy 30-day phase visits on B747, B767 aircraft.
- Performed component replacement, flight control rigging, troubleshooting and pre maintenance inspections.
- Accomplished pre and post flight inspections, making any minor or major repairs as needed to return the aircraft to a safe and operational status.
- Hands on experience using various test cells, special tooling and aircraft related equipment.
workforce
at this job
A&p Mechanic
Performed C Checks on Airbus A319's, A320's, Raytheon 727, and a World Global MD-11.
- Applied Lubrication to the MLG, NLG, Slat tracks, cargo doors, and passenger doors.
- Performed Bond/resistance checks on bonding wire and static dischargers using milliohm meters and megaohm meters. Also performed aileron and elevator freeplay checks.
- Removed & Reinstalled engine exhaust nozzles, removed & replaced seals, serviced IDG's and engine starters.
- Performed detailed visual inspections on zones 100-800 to detect and diagnose malfunctions.
- Performed Aircraft Jacking and weight & balance.
- Minor interior work (carpet, seat adjustment, seat removal/install, sidewall panel R&R ect.)
workforce
at this job
A&p Mechanic
Performed daily inspections for airworthiness of the Bell 206 Jet Ranger model helicopters.
- Scheduled inspections such as 50 hour, 100 hour and annual inspections of complete airframe and power plant systems, As well as unscheduled maintenance involving troubleshooting using applicable maintenance manuals.
- Experience tracking time change components and responsible for their removal and replacement.
- Performed routine maintenance with the Rolls Royce M250 turbine engine and its components.
workforce
at this job
A&p Mechanic
Conducted maintenance, phase inspection, troubleshooting and repair of aircraft systems, to include all King Air 90,200,300 series. Bonanza and Baron Series, Hawker, Beechjet and Premier series.
- Tested electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices such as ohmmeters and voltmeters.
- Trained and mentored newly assigned mechanics and contractors.
- Experienced aircraft interior removal/installation and refurbishment of seats, interior carpet, overhead bins, sidewall panels, lavatories and galleys.
- Knowledgeable in various bonding agents and adhesives.
- Specialized in the balancing of flight controls and landing gear inspections and wing deice boot replacement.
- Interpreted aircraft manuals and IPC's for the correct and timely ordering of all parts related to work orders and discrepancies.
- Recognized for building positive relationships with challenging clientele
workforce
at this job
A&p Mechanic
Performed Routine Line Maintenance Included but not limited to Service Checks, Line Checks, Scheduled PS-1 Checks, PS-2 Checks, and Courtesy Checks.
- Performed Non Routine Maintenance
- Performed Routine Inspections and Trouble Shooting including Airframe Structures, Engines, and Aircraft Systems Using Approved or Accepted Data issued by the Manufacturer or FAA.
- Able to Accomplish Maintenance Functions in Accordance with the AMM, Company Maintenance Manuals, Applicable Work Cards or EO'S.
- Performed Overnight Maintenance Required to meet Company and FAA Requirements.
- Fluent with Online Company and Manufacturer's Maintenance Manuals and Citrex Maintenance OPS Dashboard.
workforce
at this job
Mq-9/mq-1 UAV A&p Mechanic
Preformed all the identical duties for [company name] as required at URS Corporation
- Trained coworkers on all MQ-9 procedures and maintenance practices
- Accomplished composite repairs to aircraft skin and flight control suffuses
- Worked to achieve journeyman level of Avionics Technician through on-the-job training
- Certified munitions loader on both MQ-1/9
- Preformed operational checks as well as trouble shooting weapons system on MQ-9
- Supported worldwide combat operations MQ-1/9
workforce
at this job