- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Electrical Design Engineer Resume Samples
No results found
Candidate Info
years in workforce
years at this job
Electrical Engineering
Systems Engineering
Contract Senior Electrical Design Engineer
Designed system level schematics for truck electrical systems using Mentor Graphics Capital Harness & Pro/E
- Analyzed and identified J1939 CAN communication issues using Vector CANalyzer and CANoe
- Worked as a member of the 2013 DOE SuperTruck program which achieved 10.7mpg in highway tests
- Assisted in developing and testing a 16.5kWhr Lithium Ion power system for the SuperTruck to replace convention fuel powered auxiliary power units, exceeded the 12.2kWhr power usage requirements for program
- Designed wiring harnesses to integrate experimental SuperTruck technology into existing systems
- Installed experimental systems and resolved functional issues for the SuperTruck electrical and computer systems
- Performed testing of the SuperTruck technology, both on the highway and in the lab
Candidate Info
years in workforce
years at this job
Mechanical Engineering
Electrical Engineering
Electrical Design Engineer
Participated mobile phone IC design including Application processor and radio processor to 0.045 micron
- Implemented system on chip physical design from netlist import, constraint setting, floorplan, power grid setting, placement, clock balance, routing, timing closure, ECO, power analyze, final drc clean up, to subchip handoff
- Developed system on chip design flow, which let different blocks simulation, static timing, and layout working in parallel and independently for a big chip design
- Delivered IP model including ILM, Budget or Real Synopsys library, timing wrapper, and design data base
- Developed fully automatic timing closure flow base on Synopsys and Magma design tool
- Worked on cell characterization and created cell library
Candidate Info
years in workforce
years at this job
Electrical Engineering
Finance And Marketing
Business
Electrical Design Engineer
Converted existing analog monitor into a digitally controlled and calibrated design.
- Managed projects for development of hardware and software, specification, and scheduling
- Developed firmware for microprocessor PIC 16C77 in C, GUI interface in Visual C++ 6.0
- Schematic capture and board layout using Protel 98
- Evaluated Altera, Actel, Atmel FPGAs for power and performance
- Created digital control waveforms replacing analog design using Xilinx Virtex FPGA and VHDL
- Supported customers (GE Medical, Philips Medical, and Kodak digital medical applications)
Candidate Info
years in workforce
years at this job
Electrical Installations Technician
Applied Science
Electrical Engineering
Electrical Design Engineer, Building Automation
- Implemented and developed the Building Management System Department to substitute previous outsourcing of third-party services, reducing company costs, and management and operational issues.
- Developed and executed processes for more effective execution of the Building Management System projects.
- Developed operational tools and improved operational efficiency for the company by creating new cost analysis documents and calculators which resulted in a 30% gain in effective time efficiency.
- Guaranteed the integration of solutions and products between all engineering departments, including Electrical, HVAC, and Hydraulic.
- Additional tasks for each project delivered including but not limited to generating I/O lists, cost estimates, and functional specifications.
- Designed wiring diagrams and electrical schematics using AutoCAD software.
Candidate Info
years in workforce
year at this job
Associate of Applied Science
Electrical Engineering Technology
Electrical Design Engineer
Worked with mechanical and optical engineers for re-designing existing products.
- Participated in team, redesigning and developing new Gauge measurement product and partnering with mechanical, software and optical engineers by sharing product details and development activities.
- Designed and tested board-level circuits, mostly in analog (Photodiode, Balanced Detector, Log, Peak Level, Filters, Laser Diode Driver, Voltage Scaling, HV Amplifier), improving bandwidth and Optical Signal-to-Noise Ratio (OSNR), resulting in enhanced measurement accuracy.
- Captured Eagle 5 Schematics and performed PCB Layouts in 4 months while generating Gerber-related documentation for PCB manufacturer.
- Performed circuit simulation, verifying function of new conceptual circuits.
Candidate Info
years in workforce
year at this job
Electrical Engineering
Electrical Design Engineer
Designing and developing a CAN-based network protocol and embedded devices (hardware and software) that communicates internally and externally to a vehicle CAN bus.
- Integrated existing products with new firmware and connectivity to develop a coordinated lighting system for emergency vehicles, resulting in large order wins in ambulance markets.
- Redesigned LED lighting control circuitry from linear 12V drivers to 12/24V switching topologies, both using dedicated controllers and manually with 8-bit microcontrollers. Appropriate circuit design and filtering was key to passing industry EMC tests.
- Redesigned several products with multicolor LED technology with new circuitry and embedded software (for Microchip 8-bit microcontrollers) to gain market advantage.
- Implementing bootloader to enable field update of application firmware over USB.
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Design Engineer
Responsible as an Electrical Engineer for a Continuous Product Development Team with tasks that include design, development, support, and cost reduction for Fellowes products.
- Designed electronics and software for three new Fellowes shredders that utilize a proprietary "auto-feeding" mechanism.
- Developed touch interface for control panels on Fellowes shredders using capacitance touch solutions on both Cypress and Microchip microcontrollers.
- Developed motor control solutions that include AC Induction and Universal (AC/DC) Brushed Motors.
- Troubleshoot and provided root cause analysis for electronics failures on Fellowes products that include Paper Shredders, Laminators, Binders, Footrest Heaters, and Air Purifiers.
- Worked in conjunction with Supply Chain to manage electrical BOMs and provided a technical insight into sourcing electrical parts.
- Mentored and coached two new Electrical Engineers as they transition into their respective roles with the company.
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Engineering
Sr. Electrical Design Engineer
- Carried out design calculations for high voltage sub-stations including grounding systems, short-circuit
- Prepared end-to-end engineering drawings such as one line diagrams, substation physical designs, as- built drawings and cable tray-trench layouts
- Developed logic and specifications for metering, control and protective relaying design
- Remodeled substation layout to come up with an efficient design which reduced the cost by 15%
- Planned and designed high voltage transmission engineering and related work
- Supported other business developments and functions including project management, co-ordination,
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Design Engineer
Prepared scope documents and budgets for proposed design work
- Developed one-lines, three-lines, protection and control schematics, RTU schematics, etc. for 12KV - 500KV substations
- Performed quality assurance reviews of other engineer's design work
- Prepared design packages for submittal to the customer
- Communicated with the customer to resolve design related issues
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Design Engineer
Lead Electrical Engineer responsible for the design and modification of aircraft avionic and electrical systems used in military simulation and training systems (UH-60, CH-47 and CH-53 helicopters, T-44 multi-engine aircraft, and M1A2 armored vehicles).
- Designed and engineered complex vehicle systems and high-fidelity LRU's capable of fault insertion and malfunction emulation.
- Designed network and data bus systems utilizing TCP/IP protocol, USB interface, ARINC 429 and RS-485/232 serial communications.
- Generated detailed system diagrams and LRU schematics using AutoCAD software, designed customized circuit boards using Eagle software.
- Designed custom I/O systems using COTS DIO components.
- Specified parts, components and supplies used in the manufacture and production of LRU's, circuit boards, cables, and harness assemblies. Generated BOM's and wire lists used in the assembly/manufacturing process.
- Assisted with the testing and troubleshooting of integrated systems, aided in the development of system requirements and Acceptance Test Procedures. Developed bench-testing and troubleshooting procedures for LRUs.
- Worked closely with Software Development, Test Engineering and Manufacturing in order to streamline system integration, resolve action items and meet contract milestones. Provided technical and troubleshooting support during HSI, CAT and GAT phases of the programs. Provided on-site support during system delivery to ensure the satisfactory completion of all RFT requirements.
Candidate Info
years in workforce
years at this job
Design
Electrical Design Engineer
Both hardware and software design of high-density mobile storage control systems and safety devices. Responsible for all phases including specification, bread boarding, schematic capture, prototyping, development, testing, production introduction and field support.
- Designed laser based scanning and detection system for user safety. Implemented hardware and migrated to C coding for improved documentation and maintenance.
- Developed Zero Force Sensor system using 8051assembly language.
- Guided and directed tasks of electronic technician
- Received four patents for innovative safety systems.
- Designed and implemented hardware and software for an automated blood glucose monitor. Developed user interface using a touch display in an embedded low power PC system. Established guidelines for safety agency compliance. Involved in all aspects of the project including mechanical design and pre-clinical testing.
- Designed a dual display video board for the PC back plane. Designed and specified major electrical components for integrated anesthesia system.
- Knowledgeable of UL544, CSA22.2, IEC601-1 and other international medical safety agency regulations and the FDA 510K process.
- Designed microprocessor based operating room ventilator to improve manufacturability and reduce component cost.
- Responsible for software validation for TUV black box and white box testing for safety relevant computer category ventilator.
- Directed technicians on prototype build and test
Candidate Info
years in workforce
year at this job
Electrical Engineering Technology
Electronics And Computer Engineering Technology
Electrical Design Engineer
Utilized RSLogix 5000 to program Programmable Logic Controllers.
- Trained, guided, and managed workloads and priorities of Controls Designer and CAD Operator.
- Ensured all electrical drawing packages met NEC, UL508A, and other required standards.
- Reviewed technical specification documents for all electrical control projects.
- Conducted Factory Acceptance Testing.
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Engineering
Senior Electrical Design Engineer
Implemented 12-bit, 1MSPS, programmable SAR ADC IP block for PSoC5 and PSoC4
- Designed analog interface logic for PSoC3 and PSoC5 integrated circuit platforms
- Increased routability of PsoC3 and PsoC5 programmable analog routing networks (patent granted)
- Developed parallel, self-checking, algorithmic DFT approach for testing custom programmable logic array for PSoC3 and PsoC5 - Verified approach with TurboFault fault simulator
- Reduced total cycle time through mixed signal design and test productivity initiatives
- Co-authored and presented mixed signal verification paper at CITEC 2007 (internal technical
- Mentored other engineers at all levels on various subjects (e.g. analog behavioral modeling, Design
- Interviewed analog and mixed signal design team candidates
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Design Engineer, Production Wiring
Re-worked production wire assemblies in prototype engine certification vehicles accommodating updated engine calibration components.
- Performed troubleshooting for electrical system malfunctions, completed repairs as needed and reported issues to component design engineers.
- Used electronic component design schematics in designing, packaging, and releasing production instrument panel wiring assemblies.
- Served as Liaison with assembly plant engineers coordinating revisions to wire assemblies to accommodate assembly plant build issues.
Candidate Info
years in workforce
year at this job
Electrical Engineering
Engineering Management
Sr. Electrical Design Engineer
for a battery operated portable OmegaTM Handheld XRF Alloy Analyzer.
- Designed from conception through full production analog/digital circuits, RF system design, DC/DC converters, sensors interface, generated schematic, prototyped, evaluated, and released products to the manufacturing.
- Designed and developed firmware for 8-bit embedded microcontroller to drive and monitor subassemblies.
- Assisted in design and documentation of X-50 Benchtop XRF Analyzers.
- Redesigned OmegaTM handheld and X-50 Benchtop XRF Analyzers in order to comply with CE markings in accordance with IEC 60601-1-2 standards.
Candidate Info
years in workforce
months at this job
High School Diploma
English
Electrical Engineering
Electrical Design Engineer
Served as project engineer and developer of lighting, signal and power distribution systems for various clienteles, including substations, commercial structures and office buildings.
- Create Substations Elementary and Wiring diagrams for Transformers.
- Efficiently assessed scope of services and provided customers with estimations, reviewed and edited plan specifications, approved shop drawings and conducted field surveys.
- Evaluated designs and project qualifications to assure compliance with NEC, UBC, CBC, CEC and other related state, county and city codes and utility standards.
Candidate Info
years in workforce
years at this job
Electrical Power Engineering
Electrical Design Engineer
- One of the two Electrical Engineers responsible for developing start-up vision and standards.
- Developed design process methods related to energy efficient lighting design and 3D BIM design for power distribution and lighting of educational, commercial, governmental, industrial, and residential buildings.
- Created and executed operating procedures used to acquire new clients.
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Design Engineer
Prepared electrical plans and details, design specifications for buildings, load and short circuit calculations for client approval.
- Designed aerial/underground distribution systems (34.5kV, 13.8kV, 4.6kV, /480kV) controls and instrumentation of the various facilities and substation.
- Supervised the electrical installation of outdoor and indoor hazardous and non-hazardous areas.
- Coordinated with the architect, civil and mechanical engineers in the preparation of plans.
- Supervised CADD operators regarding electrical drawings.
Candidate Info
years in workforce
year at this job
Electrical Engineering
Senior Electrical Design Engineer
Prepared complete plans, design, construction drawings and technical specifications of power distribution facilities.
- Gathered field data necessary for design of electrical works of power distribution facilities
- Reviewed and evaluated specifications of electrical equipment and works proposed by electrical suppliers and contractors.
- Conducted field inspection of projects in progress when necessary
- Prepared memoranda, correspondence and technical reports covering field inspection.
Candidate Info
years in workforce
years at this job
Electronics Technology
Electrical Design Engineer
Assisted lead Electrical Microwave Engineer to ensure quality board design and performance. Interpreted blueprints and implemented knowledge of geometric tolerance.
- Successfully designed multi-layer microwave modules and printed wiring boards implementing autocad for defense industry and commercial market.
- Designed 3D model drawings of mechanical parts (connectors, components), module assembly documents.
- Directed microwave assembly lab at build and test of modules.
Candidate Info
years in workforce
years at this job
Associate of Science
Electrical Engineering
Electrical Design Engineer
Served as an Electrical Design Engineer accountable for developing electrical blueprints / schematics for new construction projects and existing up-fits to commercial buildings and banks, retail stores, offices, hotels, restaurants, schools, medical buildings,
residential condos, and multi-family dwellings.
- Planned and coordinated the engineering and design of overhead and underground electrical distribution systems to provide
- Researched and selected electrical components while ensuring compliance with building codes and project requirements.
- Prepared electrical diagrams, detailed physical layouts, cost estimations, and calculations / studies including distribution power
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Design Engineer
- Developed a unique control signal PGIO generated by internal voltage supervisor to keep IOs' level shifters in valid logic states, preventing through currents in IOs. Technique adopted by TI wide microcontrollers and ICs.
- Resolved microcontroller lock-up problem. TI microcontroller (TMS470) sank large supply current during power- up. Identified through current in inverters and gates of IO circuit and developed circuit fix.
- Supported CMOS circuit designs, including EPROM, RAM, EEPROM and digital modules. Held responsibility as an individual contributor, dealt with circuit problems, debugging, simulations and fixing layout.
- Fixed layout required to process any variations in FAB. Modified metal geometries layouts to avoid line disconnects at step up or down.
- Improved operating frequencies of TMS370 micro-controllers by identifying critical control signals and minimizing delays in data path, using SPICE simulations and modifying layouts.
- Developed glitch filters and OSC low-pass filter required by Bosch for safety and reliability of modules used in automotive ABS and air bag applications. Attended Bosch and other customer conference calls.
- Optimized data and address buses, saving sales of TMS370 to Ford.
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Design Engineer
Design and development of switching mode multi-output power (AC to DC) systems for IBM.
- Involved concept through production release design responsibility of switching mode power supplies.
- Developed the procedures for validation and durability testing of the released parts.
- Resolved EMC issues by doing root cause analysis.
Candidate Info
years in workforce
years at this job
Engineering Technology
Electro-mechanical Engineering Technology
Electrical Design Engineer I & II
Reviewed shop drawings, submittals, RFI's, and facilitated all other CA questions.
- Updated and modified project specifications.
- Initial set up of architectural backgrounds and external references for new projects.
- Sized equipment including panel boards, circuit breakers wires and conduits, switchgear, and transformers to create one-line diagrams.
- Conducted short circuit studies and performed voltage drop calculations
- Designed fire alarm systems for several market sectors including hospitals and commercial buildings.
- Designed and scheduled lighting systems, fixtures and low voltage lighting controls
- Coordination of electrical services for all trades
Candidate Info
years in workforce
years at this job
Power Systems
Electrical Design Engineer
Designed modifications to the facility to improve equipment reliability
- Performed calculations to demonstrate compliance with regulatory requirements
- Provided technical solutions for electricians
- Evaluated equivalencies for obsolete equipment
- Created and executed troubleshooting plans and Failure Modes and Effects analysis to resolve equipment issues
Candidate Info
years in workforce
years at this job
Bachelor of Arts
Master of Arts
Senior Electrical Design Engineer
Designed and developed a programmable multi-processor controller. (high density SMT PCB
design including ASICs). Developed assembly language code for diagnostic and debug purposes.
- Designed, developed hardware and firmware for an embedded microcontroller based support
- Generated specifications and detailed blocked diagrams for ASIC designs.
- Designed various data and control interfaces for a COTS processor (VME I/F and Xilinx FPGA designs).
- Performed project-engineering duties for the planning, testing and supervision of the hardware and software integration of a DSP in a radar system.
- Developed and generated documentation for a product acceptance and fault isolation procedure.
- Supervised and trained test engineers and technicians on operation and debug techniques.
- Provided technical support during installation and field testing.
- Mentored and supervised junior and recent graduate engineers.
Candidate Info
year in workforce
year at this job
Electrical Engineering
Computer Engineering
Electrical Design Engineer
- Assumed Lead Engineering role for a 2.5GHz SONET transceiver module resulting in improved factory production yield.
- Took over responsibility for system FPGA designs.
- Planned and organized a cost-reduction effort for a PCB design to incorporate cost savings, increased functionality, and improved manufacturing yields.
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Design Engineer
- Redesigned electronic systems for part obsolescence, manufacturability, and specification changes
- Wrote design guide and control documentation for thick and thin film hybrid substrates
- Evaluated and corrected mismatches between products and specifications through improved hardware design
- Evaluated, optimized and improved legacy products before re-launching into manufacturing
- Consulted with contract manufacturers on component substitutions, product testing and performance
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Design Engineer
Designed Servo Controllers for High-Speed Galvanometers.
- Provided Customer Technical Support and Application queries
- Designed circuitry for Precision Capacitive Position Sensor.
- Contributed to the design of 3-Axis Laser Scanner
Candidate Info
years in workforce
year at this job
Bsee
Senior Electrical Design Engineer
Responsible for production implementation of Multiple Integrated Laser Engagement System (MILES) products and development of new products for global clientele.
- Fabricated PLD to decode MILES laser pulses for battlefield simulations.
- Directed senior technicians and engineers involved in improvement of current products and development of new products.
- Improved receiver sensitivity and reliability by a factor of 10 over previous design.
Candidate Info
years in workforce
months at this job
Electrical Engineering
Electrical Design Engineer
Designed circuit boards incorporating microcontrollers and associated digital circuitry.
- Developed software for 80C51 and PIC microcontrollers.
- Evaluated components for use in new designs.
- Supported existing product lines.
Candidate Info
years in workforce
months at this job
Electrical Engineering - Signals And Systems
Electrical Engineering
Electrical Design Engineer
Included management responsibilities of current and NPI projects.
- Coordinated and managed FDA/UL/CSA compliance activities with external
- System architecture design activities.
- Designed 6-rail isolated medical power supply.
- Conducted detailed prototype design, test, and iteration of power supply.
- Permanent position, laid off after 3 months.
Candidate Info
years in workforce
year at this job
Electrical Engineering, And Economics
Master of Science
Sr. Electrical Design Engineer
Conducted sustaining engineering and product configuration for transfer switches, switch-gear, remote control switches and designed and integrated pre-engineered electrical and mechanical sub-assemblies to pre-ordered specification
switches.
- Designed and provided modularized product structures, wiring diagrams, enclosure details and outline drawings for pre- ordered switches.
- Designed and implemented special electrical controls, mechanical assemblies to special required customer and product
- Provided technical and engineering assistance to manufacturing department as required in trouble-shooting, testing and value re-engineering of product.
Candidate Info
years in workforce
months at this job
Electrical Engineering
Electrical Design Engineer
Generated electrical specification documents for design packages.
- Provided electrical design and execution estimates.
- Developed electrical demolition and installation drawings
- Interpreted and apply various codes and standards for electrical installations.
- Coordinated with system engineers to develop project design requirements.
- Reviewed contractor design submittals and respond to request.
- Developed statements of work for the design and execution of projects by outside contractors.
Candidate Info
years in workforce
years at this job
Applied Science
Electrical Engineering Technology
Electrical/ Field Application /manufacturing /electrical Design Engineer
Oversaw complex, multiphase and high-profile engineering projects. Able to address financial constraints and complicated logistics to overcome project challenges.
- Oversaw the Test Lab and performed failure analysis on returned products from the field while delegating a team of 5 technicians under my supervision.
- Provided technical support to end users and field installers/sales force (Over the phone, via video conferencing and traveling to the sites).
- Performed product demonstrations at trade shows, during customer site visits and training sessions for the sales force and prospective vendors.
- Worked on R&D for new products on an annual basis, specifically PCB design(Hardware & Software - PSpice, ExpressPCB, Inventor ), PLC's (Firmware & Hardware - ABB, IDEC) and some programming, primarily microcontrollers(C language)
- Minor Electrical Maintenance/Repair of in house/workshop equipment.
Candidate Info
years in workforce
year at this job
Electrical Engineering
Electrical Design Engineer
- Created Design Changes to G450 and G550 Production Wire Harnesses.
- Checked ECAD Group drawings for Drawing Design Change signoff, recommended Process Specification changes.
- Provided Engineering Support to Aircraft Mechanics on Production Floor.
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Design Engineer
Responsible for the hardware design and circuit integration of Truck PC and Integrated Navigation Radio (INR) projects.
- Involved in application design projects with capabilities including embedded
- Designed, developed, and tested electronic systems from concept to implementation
- Conducted feasibility study to ensure that the end-user product could be completed within the allowable time and cost, and EE process deliverables were made on time per the project
- Performed electrical circuit analysis to ensure successful design execution and provided
- Conducted and documented verification testing on the ignition input and thermistor circuits,
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electronics & Computer Design
Electrical Design Engineer, Defense Systems Electronic Group
Provider of terrain following radar systems.
- Designed microprocessor based radar systems
- Supported Radar Systems from Full Scale Engineering Development (FSED) design through Military Qualification Testing
- Used schematic capture for design, manufacturing support production, developing diagnostics and test strategies, and integration of microprocessor based circuit card assemblies
- Developed, documented, and supervised the use of test procedures for production and military qualification testing
Candidate Info
years in workforce
years at this job
Oil And Gas Engineering
Electrical Engineering For Petroleum Industry
Electrical Engineering
Electrical Design Engineer
- Developed and analyzed designs, and single-line and interconnection electrical equipment schemes.
- Verified design changes, specifications and drawing releases.
- Managed technical development tasks, including scheduling and resolving engineering test/design issues.
- Analyzed and restructured numerous core processes to enhance critical performance metrics such as costs, quality, service and speed.
- Sustained and applied knowledge of current technological advancements to meet changing needs of company.
- Created technical drawings and specifications of electrical systems complying with company requirements.
- Oversaw project production activities to ensure operations adhered to established time and budget guidelines.
Candidate Info
years in workforce
years at this job
Electrical Engineering Technology
Electrical Design Engineer
Involved in the full life cycle of APC power products for residential and commercial use. Responsible for the design, development and testing of market leading power systems. Actively involved in beta testing customer sites and solving regulatory and compliance issues. Supervised 2 technicians on given projects.
- Designed programmable logic based 240 Volt Backfeed protection subsystem for a residential transfer switch, receiving 2 utility patents for design and saving design cycle time by managing initial product field testing for rapid feedback on installation issues.
- Designed very low power monitoring circuit using thermally protected MOVs, meeting total nighttime power consumption requirement of <1 watt for a transformer-less grid-tie solar inverter.
- Developed innovative current sensor solutions and extended battery life to 1 year for residential power monitoring system, receiving utility patent for design.
- Collaborated with utility company, installers, and electricians in design, installation and testing of a unique photovoltaic solar array, meeting special voltage and power needs for inverter testing and development while keeping system safe and reliable.
- Created simulation lab, testing concepts and design software for factory built modular data center, reducing development time by providing software team with real hardware to test against, highlighting issues unrevealed by software-based simulators.
Candidate Info
years in workforce
years at this job
Electrical Engineering
Communication
Electrical Design Engineer
Designed of protection schemes for substation applications including one-lines, three-lines.
- Prepared elementary, schematic, wiring diagrams as well as panel layouts and elevations.
- Selected protective relays per project requirement.
- Prepared panel bills of material and documentation.
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Design Engineer - Contractor
- Layout and routed prototype PCBs using PADS Flow, including oxygen sensor redesign
- Populated and evaluated prototypes to validate design and determine improvements
- Generated requirement documentation using Rational DOORS and Publishing Engine
- Performed design qualification testing for military air data computer to DO-160 standards
- Assisted in the design of DC-DC power supply to meet EMI, thermal and power requirements
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Engineering
Electrical Design Engineer
Designed harnesses for engines, power generation equipment, and mobile heavy equipment
- Converted 2D AutoCad drawings to 3D Pro/E models
- Created and modified electrical diagrams
- Participated in harness fit up testing
- Used TeamCenter to upload/download products
Candidate Info
years in workforce
years at this job
Electrical Engineering Technology
Electrical Design Engineer
Project experience includes commissioning construction sites as far as Fire Alarm Testing
Procedures, Verification Testing Procedures, Generator Testing, etc.
- Assisted in the submission of construction documents to the Project engineer
- Used the Autocad 2006-10 software for the development of the construction documents
- Produced and edited one-line diagrams, schedules, site drawings, construction drawings, existing and future ductwork, site plans and frequent site visits.
Candidate Info
years in workforce
years at this job
Project Funding Requests
Electrical Engineering
Team Leader, Sr. Electrical Design Engineer
Manage and Lead team of 5 Electrical engineers that develops, designs, documents and manufactures clean diesel, CNG and hybrid electrical powered propulsion systems used on transit buses.
- Managed several Electrical engineering projects & insured compliance with NEC in component selections.
- Integrate ITS (Intelligent Transport System), Video Surveillance into transit buses and vehicle electrical systems.
- Work with the suppliers to ensure successful product development and testing utilizing SAE J1938 & J1455 standards.
- Design complex electrical wiring harnesses and cabling to integrate all electrical systems and components including engines, transmissions, PLCs, interior and exterior lighting, 12 and 24 Volt DC systems, 230-600 Volt AC Systems, HVAC systems, etc.
- Provide detailed electrical schematics, ladder logic for multiplex PLC and first article Q.A inspections of harness assemblies and various components.
- Assist manufacturing, Q.A., and purchasing with product improvements, specifications and research and development.
- Provide troubleshooting, technical support and training for production, field service and the end customers.
Candidate Info
years in workforce
months at this job
Computer Systems Engineering
Electrical And Computer Engineering
Electrical And Computer Engineering
Electrical Design Engineer
- Investigated and proposed solutions to mitigate noise effects in the prototype REBL tool.
- Assisted in the specification definition and review of circuit designs and PCB layout of tool control electronics.
- Provided electronic hardware technical advice and assistance to other engineers in the multi-disciplinary group to support their objectives.
Candidate Info
years in workforce
months at this job
Electrical And Electronics Engineering Technology
Electrical Design Engineer (contractor)
Substation responsible for physical station projects from 15 kV through 220 kV breakers, transformers, and etc.
- Responsibilities include, detail material design of parts, design grounding and conduit design, station lighting, and fencing.
- Performed assisting in physical design of Wind Farms.
- Assisted in company restructure of project lay-out design for customer, in-house for project to meet on time deadlines.
Candidate Info
years in workforce
years at this job
Electronics & Electrical Engineering
Electrical Design Engineer
Designing of Power Transformers as per the Customer's Specification meeting Guaranteed Parameters
- Designing of Core & Windings, Insulation assembly and Thermal aspects of transformers in accordance to the ANSI/IEEE Standards.
- Designing of Power Transformers having requirements of DETC & LTC (Reinhausen & ABB) or both on either HV or LV Winding.
- Designing of Power Transformer from 10 MVA to 100 MVA with voltage class from 5 kV to 161kV (750BIL) on regular basis.
- Have experience in Designing of a 88MVA 230 kV Power Transformer (1050 BIL)
- Designing of Power Transformers for various applications like Step Up, Step Down, Rectifier etc.
- Working closely with Sales for Preparing Quote Designs & meeting the expected prices.
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Design Engineer
Plan, design and oversee the installation, operation and maintenance of electrical components, equipment and systems.
- Design LED lighting products, prototypes, builds and test light assemblies.
- Electrical design including schematic creation, design reviews, and electrical performance.
- Act as project engineer on 737 BSI to organize meetings, documentation and engineering changes
- Coordinate new product launches with the customer, production, supply
- Interface to Orb Optronix (CSA Group) as calibration and LED expert
More Electrical Design Engineer
Resumes
Electrical Design Engineer Resume Success Stories
