- Our customers have been hired by*
-
More Quality Technician Resumes
Use these Quality Technician samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Quality Control Resume Samples
Quality Technician Resume Samples
No results found
6-10 years of experience
Maintained professional contribution to manager and team throughout eight month notification period of department being relocated to Perry, GA.
- Inspected 1,500+ finished good for quality defects daily in a fast paced environment; verifying product material paperwork, confirming time and date of orders, and checking for count, seal, seepage, uneven cuts and weigh cases.
- Reduced waste by 75% and dramatically increased quality by documenting and communicating identified errors to team and management, supporting improved production processes.
- Ensured compliance with strict cGMP requirements through constant monitoring of safety and housekeeping activities.
- Provided timely and accurate documentation of production activities on E13 base system.
- Volunteered to work overtime as Feeder / Packer while maintaining Quality Technician duties to ensure accelerated production schedule was met.
6-10 years of experience
Quality inspection of raw materials consisting of reviewing testing requirements, data entry of certifications, visual inspection and approval, distribution of paperwork, and final inspection of orders. Prepare and participate in AS9120/ISO9001 audits. Work with suppliers, vendors, and internal customers on quality related problems and issues.
- Improved the sample submission of suppliers by creating a sample tracking spreadsheet to provide accurate testing information and monthly notification to suppliers.
- Implemented new specification revision procedure that improved the communication and acknowledgements of specification revisions with suppliers.
- Enhanced quality response time for quality approval of raw materials by tracking shipping patterns and product testing completion, and entry of certifications prior to delivery to facility.
- Selected to support the job duties of purchase order approvals, requisitions, and export shipping paperwork
0-5 years of experience
Ensured compliance to company specifications, workmanship standards, and Instrument Manufacturing Quality System requirements.
- Successfully measured tolerances +/- .0005 to +/- .030.
- Interpreted requirements, and utilized careful judgment to determine compliance.
- Investigated non-conformances, and independently resolved issue, or interfaced with technicians and engineers to diagnose and remedy the problem.
- Conducted Quality Control inspections and audits to support Instrument Manufacturing including subassemblies, finished devices, and assembly test procedures for documented compliance requirements.
- Performed final inspections of completed medical devices and accessories including detailed review of Device History Record package to confirm completeness and accuracy of records prior to release for distribution.
10+ years of experience
Ballooned blueprint drawings, created Inspection Method Sheets (IMS) and reviewed purchase requisitions. Compared raw material certifications versus specifications to determine whether to release or test material prior to providing router to distribution.
- Recommended methods for improving utilization of personnel, material, and utilities.
- Planed and established sequence of operations to fabricate, assemble parts and products promoting efficient utilization.
- Applied statistical methods and performed mathematical calculations to determine manufacturing processes, staff requirements, and production standards.
- Coordinated quality control objectives and activities to resolve production problems, maximize product reliability, and minimize cost.
- Conferred with vendors, engineers, and management personnel regarding purchases, procedures, product specifications, manufacturing capabilities, and project status.
6-10 years of experience
Conducted full order audits for order accuracy, product quality, packer label discrepancy, and order presentation.
- Performed incoming product inspection for quality issues including packaging, structural damage, and mechanical defects.
- Completed random quality inspections and audits of order processing, fulfillment, and accuracy to identify errors.
- Reviewed appropriate root cause analysis and identify solutions to reduce processing errors and improve overall product fulfillment.
- Recorded errors and processing issues in the quality control database .and implement solutions for improvement.
6-10 years of experience
Covered downstream production such as: maintain forms, set pallets, identify contamination / molding defects, secure photo “eyes” proper alignment, maintained line functionality
- Scheduled quality / equipment verification of manufactured containers; produced highest quality bottles for GATORADE, PEPSI~COLA, WELCHES, WAWA
- Confirmed mold quality, i.e.: burst test, section weight, top load heights, gate clearances
- Traveled to Pepsi Cola and Gatorade fill sites to workout manufacturing site quality issues
- Oversaw changes for CSD bottles and first article inspections for new production runs
- Performed inspections on products with HFI defects placed on hold or sent for regrind
- Trained to use Hagen(TM) program which increased overall production +20%
- Certified / knowledgeable in ISO9001
0-5 years of experience
Compiled and developed a 5S manual outlining acceptable 5S, Safety, and Standard Work procedures to be used in all Harman North American facilities
- Teamed with coworker to develop and initiate the use of process audit checklists for each department in the facility
- Organized and implemented the use of Workmanship Standard books in each department
- Participated in a Kaizen event to overhaul and improve the internal document control system
- Responsible for all administrative duties of the quality department which included, but not limited to: compute defect percentages or averages using formulas. Prepare reports for inspection or test findings, compile and calculate information for monthly reports to show PPM statistics, ship quantities, and corrective action items. Created and distributed inspection standards to be used in each area. Maintain and update daily return charts and post on a central board for all employees to see. Developed and maintained an RMA (return material authorization) log and database
- Determined correct specifications by interpreting data, alignment, functional operation and company standards
- Observed and monitored production operations and equipment
- Communicate with customers and suppliers concerning quality issues
10+ years of experience
Applied SPC tools to the production of lithographic printing plate manufacturing to include graining, anodizing aluminum, coating solution mixing, coating application, and final product performance
- Performance tracking of raw material fit for use and final product performance was routinely performed via SPC software
- Fielded customer complaints to include onsite visits and implemented corrective actions associated with complaint pareto’s
- Supplied internal customer support during production to ensure yield and quality requirements were met
- Educated and supported other plants in the manufacturing of products
0-5 years of experience
Analyzed shop travelers to detect process violations
- Used Inspection reports and completed travelers to generate Certificates of Conformance
- Reviewed Mill Test certificates to ensure received raw materials met all purchase order instructions
- Assisted lead quality technician write process qualifications, fixed processes, and deviation reports
- Assigned serial numbers, heat codes, and inspected all traceable, critical parts prior to shipment
- Prepared documents for special aircraft parts machined off-site and drop shipped directly to customers
0-5 years of experience
Quality Engineering Department, First Responder, Special Project Coordinator of the Scratch and Dent Program- Donations Coordinator
- Created and led a project to donate materials to fire houses and non-profits as a way to capture tax benefits and to help the community
- Inspected processes, audited product, trained employees and supervisors and advocated to upper management for Quality Engineering improvements
- Helped with transformation from a make to stock company to a made to order facility
- Implemented Kaizen blitzes, Kanban cards, and other Lean tools
6-10 years of experience
- Printed and reviewed daily reports on vendor specifications for product parameters required prior to shipment
- Inspected products and analyzed quality according to predetermined parameters; compared results to client expectations and implemented change as necessary
- Analyzed trial products during development to maximize profitability and marketability prior to release
- Trained new associates coming into department
- Managed a team of roughly 15 workers, assigned weekly schedules, monitored safety, and performed all documentation of proper certifications
0-5 years of experience
Failure analysis on a wide variety of customer returns, both electronic and mechanical, reporting results to Engineering.
- Developed automated test fixtures for electronic and mechanical test improvements with attention to metrics.
- Assisted the Accounting Department and Customer Service with SQL data retrieval, discrepancies and analysis of returns costs.
- Provided technical support and training for the Quality Department.
0-5 years of experience
Executed lab testing for developmental tube products
- Generated detailed reports of results obtained during testing
- Performed incoming, outgoing and in-process inspection
- Created and maintained Excel spreadsheets to record test results and line checks
- Evaluated defective material and initiate vendor corrective action
- Initiated work order instructions for quality lab
- Calibrated lab equipment to ensure optimal performance and accurate results
0-5 years of experience
- Determined linear and angular characteristics of complex machine parts.
- Created and produced complex programs for a variety of coordinate measuring machines to conform to the prescribed quality manufacturing standards of the production process.
- Developed non-conforming material reports by evaluating customer returns for root cause and corrective action.
- Inspected machine parts to verify conformance to specifications.
- Computed layout dimensions, determine and mark reference points on metal stock or work pieces for further processing, such as welding and assembly.
- Layout and fabricate metal structure parts such as plates, bulkheads and frames.
0-5 years of experience
Communication skills via one on one contact with customer or via email or phone.
- Made sure transmissions were meeting all company specs before being shipped.
- Made sure all transmissions were shipped to the next customer within the plant within a timely manner.
- Walked around the assembly area and talked with fellow employees about any issues that they were having with tooling, assembly issues, and other day to day problems and resolved them within a timely manner.
- Communicated with the shipping department about deadlines that were due or past due and met their needs following company policies.
- Attended weekly and monthly department and plant wide meetings, while presenting the quality side of things to a large group. (Graphs and charts were made to show personal goals met and deadlines)
0-5 years of experience
Received samples, conducted visual evaluations, and identified defects in samples
- Performed test creation and data entry via SAP program
- Shipped samples to the third party laboratories for testing
- Developed and executed training plans on subdividing samples using official rules for all laboratory personnel
0-5 years of experience
Perform 1st piece/ last piece inspection on all finished goods to ensure compliance to the bill of material
- Analyzed the quality assurance system and made recommendations for improvements.
- Selected to train new quality applicants.
- Examine/ensure equipment in the factory to check that it met the company standards and calibration standards.
- Demonstrated the quality assurance procedures to customers on factory visits.
- Performed Quality Audits at the factory.
- Conduct melt flow analysis to ensure compliance and consistency
0-5 years of experience
Tested units using black-box testing method to more than 10 different models of Apple iMac Desktops.
- Disassembled finished good units to verify cable sub-assembly and checked for defected components.
- Performed FA to fail units to find out the root cause of the failure.
- Executed OBA, CQA Take Apart, Cosmetics Check, Re-Download, CQA testing and packing duties.
- Responsible for department 5s schedule implementation.
- Entering test results, S/Ns, P/Ns into Shop Floor and Excel data sheet.
Rate This Article
Quality Technician
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
