- Featured in:
Additional Metal Work Resume Samples
Welding Inspector Resume Samples
No results found
0-5 years of experience
Full-time welding inspector for armor repair on MRAP family of armored vehicles while deployed to Afghanistan.
- Performed battle damage assessments and oversaw repair procedures and upgrades to vehicles.
- Performed weld testing and conducted MT and PT NDT procedures.
- Ensured that proprietary written procedures were followed accordingly.
0-5 years of experience
Perform various in-process and final visual inspections during fabrication on welded and bolted connections per AWS D1.1 and AISC requirements.
- Oversee NDE operations to ensure inspections were being performed at specified hold points.
- Oversee daily welding operations to verify welders were welding within approved project welding procedures.
- Performed pre-installation testing and final inspection on bolted fasteners per AISC requirements.
10+ years of experience
Oversaw a diverse work force and inspected heavy fabrication welding in a high pressure environment.
- Recruited, interviewed, and selected employees; assigned and checked employees work; evaluated performance, and approved leave.
- Chaired meetings with employees to inform on policy and procedure changes.
- Prepared production drawings, and corrected and maintained revised drawings for the engineering group.
- Helped develop new innovative products, and improvements to existing products.
- Project manager for the design and development of a steel wheel for mining equipment.
- Liaison for the engineering of special projects.
- Taught employees how to weld, certifying welders; operate drill press, shear, punch press, bender; welding; complete layouts; and how to read blueprints.
- Wrote procedures for IS0 9000 for the engineering group to ensure customers and stakeholder needs were met.
- Used MicroStation to help engineering with production prints.
- Used Arc Works to write welding procedures and welder qualifications.
0-5 years of experience
[company name] provides qualified inspectors to gas companies and refineries.
- Test all contract welders to API 1104 and company standards.
- Ensured all piping is fabricated to the engineer approved drawings and all welds meet the code requirements.
- Ensure welders use and follow the correct welding procedure for materials being welded.
- Direct N.D.E. crews to ensure all welds are evaluated using the correct N.D.E. method and create a weld map.
- Oversee hydrostatic testing to ensure piping is tested to company requirements.
- Ensure all piping is installed per drawings and the proper pipe supports are used as specified.
- Ensure all torqueing is performed to company procedures and specifications.
0-5 years of experience
Welding Inspector - Non-CWI Inspect all fabrication and welding to ensure weld map drawings are correct
- Utility Inspector - Inspect all utility work to ensure civil work pipe line right aways are complete prior to contractor beginning job site
- Painting Inspector - Ensure all sandblasting, painting, and coating work done on equipment/pipe, complete inspection forms
- Bolting/Torque Inspector - Inspected all flange make up, flange torque, and completed inspection forms
0-5 years of experience
Hot tap and Hot Tie-in welding inspector on the El Paso/Tennessee Gas Pipeline 317, 319, 319A line 30"
- Tie-in welding inspector on the El Paso/Tennessee Gas Pipeline 317 line 30"
- Road bore welding and utility inspector El Paso/Tennessee Gas Pipeline 317 line 30"
- Firing line welding inspector on the El Paso/Tennessee Gas Pipeline 317 line 30"
- Tie-in welding inspector on the El Paso/Tennessee Gas Pipeline 319 line 30"
- Road bore welding and utility inspector El Paso/Tennessee Gas Pipeline 319 line 30"
0-5 years of experience
Inspection of all welded and bolted connections on multi-million dollar construction projects.
- Ultrasonic examination (shear wave) of column splice and moment welds in accordance with AWS D1.1 and ASNT SNT-TC-1A.
- Magnetic particle non-destructive examination (NDE) of required welded connections.
- Certified to Level II in accordance with ASNT SNT-TC-1A in ultrasonic, visual, magnetic particle, and liquid penetrant methods.
- Reported inspection results in a clear and concise manner in both verbal and electronic formats.
- Maintained quality documentation files.
0-5 years of experience
Ensured and checked all the welder joints by inspecting with the required tools and procedures.
- Assisted in construction coordination in the inspection of various welding units.
- Performed audits and various pre and post welding procedures.
- Created weld maps, traceability maps, and as-built drawings using Adobe Acrobat editing software.
- Built data books and organized logs of welder identification and welding performance per procedures and code.
- Assisted NACE Certified Inspector with anchor profiles and other Non destructive examination such as holiday testing and adhesion test of coating.
- Assisted Non Destructive Testing such as Magnetic Particle, Liquid Penetrate, Ultrasonic, Hydrostatic as well as being Level II Visual Inspector.
- Witness and perform weld audits and inspections for welding qualifications for 3G, 4G and 6GR positions of both structural and pipe welding in SMAW, FCAW, GTAW & GMAW.
0-5 years of experience
Performed testing of products at specific stages to ensure meeting of quality measurements, including dimensions, performance and correct chemical makeup.
- Inspected welds for quality standards.
- Rejected inferior products and inferior welds.
- Read and interpreted engineering documents.
- Performed statistical analyses using computer models to test conformance to specifications.
- Worked as a part of the management team to achieve increased productivity while reducing error rates.
10+ years of experience
Trained welders in safety and proper required training of electrical welding and procedures. Trained welders in equipment set-up, functions, and safe operations.
- Trained welders to oversee development of gas transmissions and feed piping.
- Inspected to applicable codes to develop welding procedures and processes.
- Documented and handled all regulatory compressed industrial gases.
- Completed safety operations of gas, electrical and mechanical welding and cutting equipment. Trained in proper handling and storage of filler metals and filler electrodes.
- Trained in classification and proper filler electrode usage for process compliance.
- Trained for gas equipment operation and repair.
- Trained for electrical welding equipment and proper set-up, operation and repair.
- Trained for equipment proper parameters of welding technique and process.
- Performed destructive testing for 6G certification and procedure qualification reports.
- Served on AWS Review Committee overseeing industrial gases with AWS sub-committee for welding distributions.
0-5 years of experience
Oversaw five man crew for various companies (Sonoco Pipeline, Mariner East and West Project)
- Evaluated corrosion with pit gauge and UT meters
- Visually inspected tie-ins and A & B sleeves installed
- Checked welders' amps and volts to ensure each one followed proper procedures/guidelines
0-5 years of experience
Inspected projects containing anything from 24" steel main line to 1/2" screw pipe on meter runs
- Hot tap/Hot tie-ins
- Generated time sheets and daily reports using Excel
- Created Isometric drawings for launcher and receivers, valve settings, and headers for meter runs
- Weld-mapped tie-ins for as-built
6-10 years of experience
- Non-destructive testing of gasoline pipelines, including: radiographic testing, magnetic particle testing, dye-penetrant testing and visual testing
- Knowledge and understanding of pipelines, refineries, power plants and tank work
- Inspected welder qualification and certifications
- Trained in welding practices and knowledgeable with welding regulations
- Experience with destructive testing including: compression testing, tensile testing and bending moments
- Developed time management as a direct result of heavy workweeks and flexibility with overtime.
0-5 years of experience
Meet with PG&E superintendents and contractors for pre construction job planning and requirements.
- Conduct job site walks to foresee any issues or complications to any specific site
- Work with safety and environmental companies to keep PG&E in compliance with state and local laws
- Document all daily activity with reports and pictures on a daily bases for construction managers
- Collect all pertinent job information during Job from all phases and aspects for final job turnover package.
- Collaborate with site PE and draft as built documents in the field for necessary changes and final survey.
years of experience
- Perform internal and external inspections to determine if a weldment meets the acceptance
- Perform internal and external inspections to determine if a weldment meets the acceptance criteria of a specific code, standard or document.
- Communicate and deal with customers and other parties in person in such a manner as to benefit the professional reputation of the company
- Inspection and verification of both in-process and completed work activities, including witnessing construction/performance testing performed by construction or contractors as directed by the Construction Quality Control Manager.
- Inspected products for quality and monitored production operations to improve quality.
- Analyzed inspection results to recommend corrective actions.
- Prepares NCRs and Inspection test reports
0-5 years of experience
Managed welding inspection staff
- Maintained and combined daily weld logs
- Managed X-ray crews and logged welds into database
- Oversaw all aspects of welding
- Kept on file all RT and welding procedure and qualification records
- Made sure procedures were properly qualified and applicable to the materials welded
- Kept on file MTR's and checked materials that were used in production
0-5 years of experience
Document inspection activities inspection status and/or results ( NCR/Daily Reports)
- Visually inspect welds to ensure they meet acceptance criteria of specification AWS D1.1.
- Perform assessments of contractors work processes to ensure contractor is using latest approved drawings and procedures.
- Communicate with Project Manager, Fabrication Shops, Contractors, and other third parties to resolve issues
years of experience
Welding Inspector for Welder Testing at Northern Natural Gas Facility in Clifton, Kansas
- Welding Inspector on the installation of 21 miles of 16" gas line for Altas Pipeline Mid-Continent in Carter County, OK for Atlas
- Welding Inspector on the installation of 12 miles of 16" gathering line for Atlas Pipeline Mid-Continent in Carter County, OK, for Atlas
- Welding Inspector/ Utility Inspector on 3
- Welding Inspector/ Utility Inspector on 21 miles of 30" recertification and replacement, 6 dig sites, 5 test sites. Wrote Hot Work Permits. Overseen Excavation, Welding and Hydro Beaver OK, for NNG
- Welding Inspector/ Utility Inspector, stoppel and new valve installation. Wrote Hot Work Permits. Overseen Valve and Stoppel installation and Welding in Dumas Tx, for NNG
0-5 years of experience
Manage the inspection activities and duties of all welding inspectors from start to finish on pipeline and station fabrication. Manage inspection costs and overhead
- Coordinate the x-ray crews, real time and gamma, for daily assignments and accept daily reports. Manage costs of x-ray crews and determine manpower and equipment needs.
- Document weld quality, weld totals and tracking rejects and repairs for weld count for accuracy and accountability
- Reconcile the x-ray and survey numbers to track all welds for accurate pipeline and create fabrications as-builts
- Help manage anamoly digs, determine acceptance or rejection. Observe and document anamoly cutouts and repairs
- Work closely with operations group for start-up and commissioning line
- Create and manage project punchlist for end of job completion
0-5 years of experience
Witnessing Procedure Qualification Record (PQR or WPQR) on Super Duplex tube to tube using Orbital GTAW tie -in welds per ASME IX using Polysoude P6 Power base
- Checking joint geometry
- Verifying base metal conform to the specification
- Witnessing Procedure Qualification Record (PQR or WPQR) on structural steel filet weld using FCAW semi-automatic welding process per AWS D01.1
- Visual inspection on completed weld
- Witnessing magnetic particle test.
- Reviewing weld radiography films for weld defects
0-5 years of experience
Manages inspection projects, including scheduling, coordinating, and completing weld inspection jobs in various facilities
- Reviews weld procedures and PQR's; verifies welder certifications are current and compliant; reviews operation procedures; monitors in process welding and fabrication
- Vendor surveillance of customer facilities and equipment inspection
- Monitor and document welder qualification and welding procedure qualification testing
- Experience with API, AWS, and ASME codes
- Works long hours as required to meet business needs
- Short term employment goals: Acquire additional certifications through API for Piping and Pressure Vessel Inspections.
0-5 years of experience
Inspecting all welds in my area and completing the appropriate NDT
- Controlling and verifying specifications
- Planning and scheduling of daily work activities
- Weld mapping/tracking data, verifying documentation and cost control before/during/after the job is completed
- Perform PT, MT, UT, VT, RT
- Welded Pipe/Pipe Components Together to fabricate and Install according to blueprints, GTAW/SMAW processes, work orders, and permits.
- Laid-Out, Welded, Fabricated, Assembled, Installed, and Maintained Piping, Piping Systems
0-5 years of experience
Helped develop welding procedure specifications
- Maintained and monitored procedure qualification records
- Inspected welds for discontinuities and or defects
- Work with third party inspectors to ensure the weld is up to the required specification
- Use Vermatt system to observe the heat input
0-5 years of experience
Perform visual inspections on welded products and structures in progress and completed jobs
- Perform test on welds to insure they can handle specified stress
- Visually inspect for defects in the weld such as cracks and pits with the use of magnification
- Search for potential defects that may cause weakness in the strength of the joint
- Measure welded products to ensure they meet specifications and to determine if the weld will hold up under stressful conditions
- Check weld machine setup and the welding techniques of welders on work in progress to ensure quality of work
- Record the results of test and welding inspections
0-5 years of experience
Fit up and visual inspection before, during and after welding of Pipes Lines (C&K lines, HYD lines, Riser, Inner & Outer Barrel), Tension RG and different types of lifting lugs
- Inspect and monitor different welding processes as GTAW, SMAW, GMAW, SAW, GTAW-P (Arc 5 & 6) & Robotic GMAW
- Check and verify MTR'S of every materials to be welded
- Check and verify WPS before welding
- Monitor Welder Qualification Test and Record
- Inspect and monitor the welding of BOP's bodies
- Inspect the fit up and welding of BOP lower and upper Stacks and LMRP
- Inspection of reworked parts
10+ years of experience
Performed comprehensive welding on all types of material and piping.
- Performed welding on live natural gas pipe lines.
- Read and understand pipe drawings including the ability to fabricate from them and perform the as-built of the drawings.
- Tested and maintained current welding procedure certification per standards.
- Developed certified welding inspector skills on NDT certification.
0-5 years of experience
- Pretested all welders and pretested automatic welders
- Inspected welds on 42" Mid-Continent Express for Kinder/Morgan
- Line distance of approx. 100 miles
- Completed job in March 2009
0-5 years of experience
- Work as a CWI / QA in various locations in the shop and out in the field.
- Check welder qualifications, welding procedures, weld sizes and note discontinuities for repair, as well as check for accuracy on projects from start to finish to achieve ideal quality.
- Inspect dimensions and welds in accordance with blueprints and the applicable code manual.
- Work with D1.1 (structural) and B31.3 (pipe welds).
- Perform PT and MT testing as required, in accordance with SNT-TC-1A guidelines.