- Our customers have been hired by*
-
More Assembly Technician Resumes
Use these Assembly Technician samples as a guideline or visit our extensive library of customizable professional resume templates.
Select
Customize
Download
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Production Resume Samples
Assembly Technician Resume Samples
No results found
10+ years of experience
Worked with Manufacturing Engineer to develop new fuel system product test stands and fuel gear pump assembly station.
- Developed a Production Tracking System for use by production crew and management to ensure accurate and on-time delivery to customers.
- Developed procedure for processing nonconforming production material to reduce scrap costs and recover quality components from rejected assemblies.
- Managed department overtime schedule and coordinated scheduling demands with department supervisor.
- Team Leader of nine member Team-Based-Work-System production crew; manufactured and tested fuel systems on sub-assembly stations and assembly line.
- Helped ensure safety, quality, and production demands were met through 5S implementation, Controlled Process Documentation, and Production Tracking System.
- Qualified Process Trainer for Cummins-Scania Integrated Fuel System Module (IFSM) Assembly Line.
- Coordinated with department supervisor, materials coordinator, production coordinator, and plant shipping dock to ensure production orders were delivered on time.
- Part of Team that increased production from an average of 80 IFSM’s per shift to an average of 160 IFSM’s per shift.
6-10 years of experience
Assembled quality cabs for backhoe loaders and wheel loaders using paper/electronic work while following Standard Assembly Practices (SAPs).
- Tested all operating systems for backhoe loaders to ensure tractors were operating in established parameters.
- Diagnosed and repaired all tractors to ensure a quality product for customers.
- Volunteered as the safety team representative for assemble team.
- Assisted in a setup for wheel loader cabs new assembly line.
- Trained assembly technicians in various jobs duties.
- Used various torque tools and Standard Assembly Practices (SAPs) associated with tools.
0-5 years of experience
Constructed ballistic and blast proof fuel systems for the Department of Defense
- Assigned to build & pressure test the 125 gallon fuel tank for the Abrahams Bradley Tactical Tank for the Army valued at $35k each
- Learned responsibilities for all 6 work stations within 2 months
- Improved pressure testing efficiency by 20%
- Participated in improvement initiative to technical training process
0-5 years of experience
Maintained cleaning processes in a cleanroom to provide parts necessary for quadrupole and 320-MS, 325-MS, and 1200-MS system assembly
- Assembled sub-assemblies for the final assembly of the (Mass Spectrometry) (320,325,1200, and Archon Auto Sampler)
- Assembled quadrupole that achieved an average of 80% – 90% FPY (final pass yield)
- Responsible for handling hazardous material: Methanol, Propanol, Acetone and other cleaning detergent
10+ years of experience
Assembled several types of cables (D38999, M28840, M81511, KG40, DD78P/S, Ribbon, Triax, Coax, Ethernet, Power cables.)
- Assembled complex multi-channel NTDS boxes. (Tap box, 16 channel fiber chassis, ATR Box, NTDS to fiber converter, 2 channel NTDS Jepico, NTDS to fiber optics)
- Performed complete assembly with no supervision on assigned standard project build releases.
- Engaged in final testing and documentation of project build to specification
- Analyzed and determined equipment problems encountered during assembly and testing of equipment.
- Discussed operating results with mechanical engineer and manager.
- Communicated to engineering of non-forming and fitting manufacturing part designs.
- Soldering 150 pin gate arrays, transition modules, cables.
6-10 years of experience
Developed wiring diagrams and layout drawings for system or equipment modification
- Performed functional and operational tests on printed circuit boards with calibrated test equipment
- Conducted failure analysis and communicate findings through Non Conformance reports
- Repaired, modified, and maintained electronic circuits and systems to ensure effective operation
- Knowledgeable and skilled with use of standard electronic test equipment and bench tools
- Assisted R&D Engineering with testing and screening of new product lines
- Maximized workload efficiency for positive performance in a timely manner
0-5 years of experience
Performed many diverse tasks from assembly of sub components to assembly and integration of highly complex assembly and testing processes for CNC machine tool.
- Assembled, installed electrical, electronic, mechanical or hydraulic and pneumatic components from complex technical drawings, sketches, wiring diagrams, procedures, and verbal and written instructions with minimal or no supervision.
- Recorded run-off, function tests, advanced adjustments, calibration tests and documentation for certification of product to customer and quality control requirements.
- Repaired, rebuilt and calibrated mechanical, hydraulic, pneumatic and electrical assemblies and systems
- Served as Field technician and performed multiple sophisticated troubleshooting and repairs on customer sites to meet quality specifications.
10+ years of experience
Responsible for putting out quality product in a timely manner. Acted as liaison between the assembly line workers and the team leads.
- Chosen by supervisors to participate in employee committee meetings
- Helped to establish a more effective positive attitude which reduced employee turnover
- Identified problems. Diagnosed causes and determined corrective actions for effective production methods
- Consistently met or exceeded production and quality goals
0-5 years of experience
Product lines included Pyro-valves, life vest inflators and air crew survivability products.
- Responsible for the mechanical and electrical assembly of devices, material and products.
- Interpreted work instructions drawings and prints.
- Trained and supervised lower level technicians.
0-5 years of experience
Prepared work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials.
- Positioned parts and subassemblies by using templates or reading measurements.
- Assembled components by examining connections for correct fit; fastening parts and subassemblies.
- Verified specifications by measuring completed component.
- Resolved assembly problems by altering dimensions to meet specifications; notifying supervisor to obtain additional resources.
- Kept equipment operational by completing preventive maintenance requirements; following manufacturer’s instruction
0-5 years of experience
Utilize MSO specific routings in order to assemble components for manufacturing of product.
- Knowledge of routing creation to include development of new processes and procedures for the assembly of products.
- Goals set and achieved through the use of the continuous improvement and six sigma principles.
- Ability to work in diverse team setting maintained by using our values in action.
0-5 years of experience
Provided support and trouble shooting for FAT and CAT testing as well as solutions/remedies for identified problems. Conducting various test using hydraulic fluids and pressure testing.
- Performed complex assembly and disassemble for multi-components for sub-sea equipment. This included building components that included but not limited to sensors, bladders, regulators, multiple vales assemblies, pressure transducers, pipes and tubing.
- Performed quality checks and test on assemblies in process to ensure proper calibration and specs were achieved
- Performed custom kit assemblies for customers on demand for hotshot deliveries
- Operated various industrial trucks and equipment including, but not limited to 45k forklift, electric lift and various cranes.
- Adhered to all established policies, procedures and compliance specification requirements to ensure quality and mitigate risk
- Completed annual and required training in order to maintain certifications
- Utilized various computer systems and software to aid and complete task such as JD Edwards, EPIMS, Metal Tractability, MS Excel, MS Outlook, and Web Focus
6-10 years of experience
Perform various production assembly functions, according to product specifications, in the fabrication of the U-Scan Genesis self-checkout systems.
- Ran wiring in Self-checkout units.
- Perform device testing on units to ensure they work properly.
- Install customer specific images, software, and hardware.
- Organize and maintain workplace based on the 5S philosophy to improve efficiency and work flow by creating and maintaining an organized work area.
- Trained in ISO 9011:2008.
0-5 years of experience
Disassemble training aids and vehicles and reassemble with faults installed
- Built and assisted in building training aids and components for UTI courseware
- Performed work on training aids including: cleaning, assembling, wiring, soldering, and MIG welding fabrication
- Delivered work in a timely manner, adhering to timeline and high usability by both students and instructors
- Worked closely with Sr. Education Program Management to ensure deliverables are high quality, on time, and on or below budget
0-5 years of experience
Assembled and tested LED controller and LED lighting prototypes and pre-production units for Engineering and lab testing.
- Worked with electronics schematics, BOM’s, Oracle, and Visio, to procure components and assemble PCB’s.
- Used 5S, and project management processes to document and complete project request in a timely, efficient, and detailed manner.
- Operated electronics assembly machinery, (Stencil Printer, Pick and Place Machine, Reflow Oven, Conformal Coating Machine, etc.).
- Soldering of components and wires to IPC-A-610 standards. Rework of defective units @ rework station.
0-5 years of experience
Repaired assembly defects cell phones returned to various manufacturer for resale purposes
- Packaged finished products and prepared them for shipment
- Rotated with others techinical though all tasks required in the particular production process
- Completed production reports to communciate team production level to management
0-5 years of experience
traveled to customers’ stores and homes to service, assemble, and repair merchandise
- operated and assembled machines according to specifications, using hand or power
- Maintained records of maintenance work and repairs.
- Trained new assembly technicians in proper building policy.
- Traveled out of state to stores such as Lowes, Home Depot, and Sears.
6-10 years of experience
Test and troubleshooted printed circuit boards for uninterruptible power supplies assemblies.
- Maintained in-house test fixtures.
- System tested 20-50Kva PCB spare kit assemblies for joint venture partner Densai Japan.
- Test and assemble sub-assemblies for systems 3000, 6000 and 7000.
- Worked with Engineers to performed system level test on 0.5 to 2.0Kva units.
0-5 years of experience
The company engineers and manufactures industrial pumps, process equipment, sealing devices, explosion proof boxes and dispensing systems.
- Work independently assembling engineered to order and highly configurable equipment
- Install, test and troubleshoot electro-mechanical, fluidic and hydraulic systems
- Interpret blue prints and schematics to ensure proper installation and equipment quality
- Experienced with pipefitting, metal fabrication, wiring and control board installation.
- Safe use of soldering, welding, cutting and fabrication hand tools and measuring equipment
- Work closely with engineers to build and test prototypes and proof of concepts
0-5 years of experience
Complete assembly from bare block to engine tests, on Caterpillar 3500 and 3600 natural gas/diesel engines
- Proficient in understanding engineering assembly prints for correct orientation of wiring and components related to engine manufacturing
- Utilize torque/tension procedures and tools for critical engine components
- Safe operation of Jib, Gantry and 1 to 50 ton overhead cranes
- Use of precision gauges for cylinder head valve adjustments, diesel fuel injector settings, flywheel and crankshaft run-out
- Responsible for training new employees
0-5 years of experience
Trained to build surgical instruments for the Da Vinci Surgical System.
- Worked in a Clean Room environment.
- Handled and assembled small parts and instruments on a daily basis.
- Good with the use of microscopes.
- Underwent classes such as Ergonomics, and General Manufacturing Practices, and learned daily procedures such as 5s, and CCEE.
- Built 5m surgical Endowrist instruments daily which include bowel, thoracic, and schertel graspers, monopolar cautery, curve and round tip scissors, Maryland dissectors, debakey forceps, and the latest released instrument vessel sealer.
0-5 years of experience
- Performed pressure tests and visually inspected vacuum packed life rafts
- Inspected spherical pressure vessel shells for the Hellfire and Paveway Missile Systems
- Worked to detailed sequence of instructions following manufacturing and engineering specifications
0-5 years of experience
- Set up, operated, and maintained automated inspection machines such as X-ray machine and optical inspection machine.
- Performed automated machine inspection for solder defects and component placement.
- Assembled electronic circuit boards on manufacturing line. Tested, diagnosed and made adjustments to repair electronic malfunctions.
0-5 years of experience
- Assembled armored steel/aluminum doors for U.S. military Hummer vehicles
- Provided training to newly hired personnel to ensure proper assembly procedures were being followed
- Performed quality inspections on all assembled doors to maintain a zero-defect rate
0-5 years of experience
Assembly, inspection, and packaging of plastic chemistry analysis discs in a clean room environment.
- Material handing, machine loading and unloading.
- Reliable inspection of small attribute using magnification ring lamp at a fast pace.
- Ability to maintain a record of the assembly process, progress and problems.
- Provide feedback to leads or supervisor when a deviation from accepted practice or safety issues are recognized.
- Complete basic training GMP and 5S program.
0-5 years of experience
- Responsible for assembly and calibration of over 600 motion control boxes for professional photographic use, which accounted for $500,000+ in sales revenue for the company
- Troubleshooting and repair of sensitive electronic equipment
- Created digital instruction book detailing the steps of each assembly process for training and review purposes
10+ years of experience
Marine Engine Test Cell Operator – responsible for running multiple test stands
- Troubleshooting engines in the cells to facilitate successful tests without interrupting production flow
- Leak testing of engines after test
- Various assembly and off line repair positions during tenure at Cat
- Oil lab Technician – ran a plasma spectrometer to test engine oil samples
- Promote teamwork, safety, and quality by maintaining quality leadership skills
- Perfect attendance 9 of 10 years
- Excellent work record and evaluations
0-5 years of experience
Kitting every work order issued for assembly.
- Building the mechanical assembly for Mobile Trace systems according to the drawing and B.O.M (bill of material) using Lean Manufacturing process one piece flow.
- Test voltage on HV pulse board, power board, and motherboard according to process specification.
- Performed the mechanical assembly on the HV pulse board, power board, motherboard into chassis.
- Programming flash disk and CPU into motherboard using Tera Term software.
- Wire to wire soldering, thru-hole soldering, and cramping wire.
- 100% testing on completely build Mobile Trace system.
0-5 years of experience
Control or operate machines, using panel boards, control boards, or semi-automatic equipment.
- Draw samples of products and conduct quality control tests to monitor processing and to ensure that standards are met.
- Record operating data, such as process conditions, test result, or instrument readings.
- Examine and measure complete materials or products to verify conformance to specifications, using measuring devices, microscopes, gauges, or calipers.
- Remove minor jammed materials from machines and readjust components as necessary to resume normal operations.
- Package finished products and prepare them for storage or shipment.
6-10 years of experience
Build equipment for U.S. government
- Performed duties that are in compliance with CGMP and safety rules.
- Read blue prints to install military equipment for the U.S. government.
- Review equipment/components and remove expired equipment/material; notify prep of removal.
- Collect, label, appropriately prepared applications to each secured piece of equipment for out processing of deployable materials.
0-5 years of experience
Manufacture and refurbish severe service valves for the petrochemical, oil refining and steel mill industries. Cross trained in QC/QA, manual machines, and fabrication. Served as interim nightshift supervisor for 6 months overseeing the safe operation of assembly, machining, and fabrication departments.
- Preform teardown and inspections of incoming valves.
- Pneumatically and hydrostatically test valves and valve bodies. Perform hydraulic and electric actuation function tests on assembled valves.
- “Hot Stroke” completed valves under operating temperature to ensure functionality.
- Tack weld internal bolting and fabricate fixtures required in the assembly process and use arc gouging to remove valve components in the disassembly stage.
- Assist quality control in dimensional inspection of finish machined parts and incoming materials. Trained to PT and PMI materials.
- Machined small components on manual lathes and Bridgeports.
- Complete all processes while monitored by first and third party inspectors.
- Install refractory to ASME specifications.
- First responder training.
0-5 years of experience
Conjoining engines to generators as a unit, assembling engines from start to finish.
- Building to specs by the use of engineering prints and instructions.
- The use of various over head cranes from 110 ton down to 2 ton.
- Used specific torque tools and alignment equipment.
- Mig welded and fabricated engine an generator mounts along with necessary plumbing and accessories.
- Pipe threading and hose making.
- Use of different computer programs.
0-5 years of experience
Assembly and disassembly of frac and surface wellhead systems.
- A proven safety leader, actively participating in all safety programs on location (daily safety meetings, JSA’s, weekly and monthly drills).
- Ability to operate high and low pressure pumps, hydrostatic pumps, high torque wrenches, jib cranes, and rigging.
- Ability to use hand tools, power tools and measuring devices such as height gauges, adjustable parallels, calipers and pressure gauges.
- Forklift certified (3 to 16 tons).
- Overhead crane certified.
6-10 years of experience
Soldering and electrical/mechanical assembly
- Repair, modification, and production assembly of printed circuit boards
- Achieved quality products in an expedited orders from the customer
- Work independently with proper processes and procedure
- Highly motivated, focused and detail-oriented.
- IPC/EIA J-STD-001 Certification
- PC *A-610 Soldering Science SAE AS9100 Certification
- Surface Mount Soldering Institute for Leadership Excellence Certification
0-5 years of experience
Assembled parts for new and existing manufacturing lines for Toyota Mfg.
- Participated in Kiazen events to improve part quality and assembly techniques.
- Received training in the Kanban system material flow.
- Maintained assembly equipment.
- Maintained 5s conditions on equipment and work area.
0-5 years of experience
- Assembled shocks and shifting cables on Side by Side ATVs.
- Collaborated with engineers on assembly issues regarding errors in production.
- Assisted coworkers as needed to maintain production sessions.
0-5 years of experience
- Determined conditions impeding flow of work on motor vehicle assembly line and notified responsible personnel that corrective action was necessary
- Informed workers of supervisor’s instructions
- Discussed methods of resolving recurring production problems with workers and supervisors, utilizing knowledge of assembly process
- Observed material stock along assembly line and notified materials-handling personnel or supervisor of impending shortages
- Loaded stamped metal body components into automated welding equipment that welded together components to form body subassemblies
10+ years of experience
Responsible for a multitude of manufacturing functions, including but not limited to the assembly, testing, inspection, packaging, and shipping of diesel engines
- Provides logistical support to the engine manufacturing process
- Diagnoses malfunctions, performs adjustments, and repairs engines found to be defective by manual and/or computerized test stations
- Mixes paint and maintains supplies of the paint area
- Manages hazardous waste satellite accumulation stations
- Operates and participates in a team environment
0-5 years of experience
Repair, assembly and breakdown of Frac 7/15, 7/10, 7/5 Valves.
- Responsible for daily maintenance of machine (Oil, grease, water).
- Ability to work independently and complete daily activities according to schedule.
- Painting and pressure washing valves
- Ability to understand and read blueprints.
- Operation of 2 ton and 10 ton cranes.
- Testing of valves 10,000 PSI while demonstrating safe working practices.
6-10 years of experience
Responsible for implementation of Standards and Procedures for assembly maintenance
- Adheres to all Quality Management and Environmental Standards
- Trained in General Motors’ Global Manufacturing Systems
- Utilizes Job Element Sheet (JES) to accomplish proper installation of vehicle components
- Analyze correct and incorrect components prior to installation on vehicle
- Reports any imperfections and incorrect components to group leader
- Responds to all repair alarms for 2 production lines and elsewhere as directed or needed
- Interfaces with material personnel to ensure timely delivery of parts to assembly line
6-10 years of experience
Diagnosed, repaired, and inspected Pocket Pcs used by Fedex drivers.
- Trained new hires how to utilize the Honeywell assembly process to repair Fedex units.
- Utilized teamwork, 5s procedures, and concise communication in process.
- Entered daily production in computer at the end of the shift.
- Ordered parts for my team members if needed.
- Maintained clean work environment.
0-5 years of experience
Maintain a sterile environment to assemble medical devices, production and prototypes
- Works closely with immediate supervisor, engineers and co-technicians to coordinate assignments and sustain production work schedule
- Monitor defects in order to address failure issues and assist in their resolution
- Ensures compliance with documented assembly procedures, SOP’s, CGMP’S and applicable safety standards
- Cross-trains Assembly Technicians on work assignments
0-5 years of experience
Assembles hydraulic systems in accordance to work order using hand and power tools.
- Tests all assembled systems for standard expectations of quality, quantity, and time.
- Maintains system accuracy but updating inventory records by updating parts used, defective parts, and additional parts needed.
- Assists customers with needs assessment and completes repairs.
- Coordinates with material handling, sales and others to expedite orders.
- Maintain safe and orderly work area.
- Other duties as assigned.
0-5 years of experience
Assemble one to 10 gallon stainless steel chemical containers.
- Certified in all chemical container assembly operations
- Read and follow blueprints; ensure compliance with work instructions/specifications
- Utilize brackets, level sensors, and valves
- Test containers using a helium leak detector; ensure no contamination or moisture is present to two parts per billion prior to filling
- Construct a variety of manual and air operated valves
0-5 years of experience
Carry out tasks related to assembly or repair activities such as testing and calibrating devices
- Fabricate, assemble, or disassemble manufactured products by hand
- Modify electrical or electronic equipment or products
- Precision assemble electronic, electrical or electromechanical equipment
- Read manufacturing outlines, schematics, specifications, work orders, formulas or processing charts
- Solder electrical or electronic test devices or equipment
0-5 years of experience
Completes Filling and Packaging jobs as assigned
- Vial Labeling and product inspection
- Completes appropriate documentation and SAP transactions in an accurate, neat and timely manner to maintain >95% inventory accuracy
- Sterilized instruments and lab equipment in Clean Glass Wash Room
- Sub-assembly of medical products
- Issue materials from MSTS for vialing and packaging
- Perform material movement of inventory and supplies
6-10 years of experience
Work with 20 assembly professionals responsible for assembling carrier axels.
- Quickly and effectively install brake parts and axil knuckles.
- Set max turning angle (MTA).
- Maintain quality control/satisfaction records, constantly seeking new ways to improve customer service.
- Responsible for safety and maintenance of work area.
- Support next shift thru setting up production line.
0-5 years of experience
- Diligent assembly of inverter cabinets for solar panels
- Reviewed and ensured accuracy of all build documents
- Oversaw work for safety and compliance considerations
- Ensured Electrostatic discharge fell within regulatory limits
0-5 years of experience
Mechanical Assembly (LowerKelly Valves, IBop Valves, Stabbing Guides, Elevators, Safety Clamps)
- Valve Testing ( Lower Kelly & IBop Valves)
- Forklift operation
- Paint Equipment ( Crossover Subs, Lift Subs, Test Plugs, Pup joints)
- Clean & Inspect Connections ( HT-38, XT-39) with Wire Wheel
0-5 years of experience
- Perform electrical & mechanical assembly
- Help identify problems and provide solutions
- Ensure that work area is clean, secure and well maintained in accordance to 5-S program
- Follow established quality and safety standards
- Provide training for new hires
Rate This Article
Assembly Technician
Last edited by: Gabriela Barcenas, CPRW, Content Writer II -
Gabriela Barcenas
CPRW, Content Writer IIGabriela is a Certified Professional Resume Writer (CPRW) and career adviser. With 10 years of digital media experience and five years of resume writing expertise, her publication history includes fashion, education, travel, social justice, equitable design and career advice.
