- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Mechanical Assembler Resume Samples
No results found
Candidate Info
years in workforce
years at this job
High School Diploma
Welding: Smaw; Gmaw; Fcaw
Mechanical Assembler Iv
Consistently meet or exceed daily production goals.
- Supervised and trained fourteen mechanical assemblers.
- Proactively assisted teammates as needed.
- Proposed recycling measures resulting in decreased waste cost and increased revenue.
- Certified safe forklift operator.
Candidate Info
years in workforce
years at this job
Mechanical Assembler
Assembled and Integrated Aspen 200mm and 300mm Strip, Lite Etch, CVD, RTP Systems according to Integration Procedures and Engineering Drawings.
- Performed wiring, soldering and cabling based on Schematics and Blueprints.
- Performed visual inspections, assuring quality control and examined finished parts
- Involved with ECR and Audit Team for continuous improvement of finished products.
- Participated on ISO 9001 Internal Audit to make sure we are using up to date Procedures on our work environment.
Candidate Info
years in workforce
months at this job
Mechanical Assembler
Assembled gearboxes and tested to ensure proper fit of items and that gearboxes were assembled correctly and completely
- Resolved an issue with a specific gear part which continuously was causing issues, time and company money as the gear was not properly working due to manufacturing error
- Assembled all parts together to complete the [company name]
- Conducted testing to ensure [company name] was assembled and is functioning correctly
- Resolved any issues from testing when necessary
Candidate Info
years in workforce
years at this job
Computer Programming
Mechanical Assembler
Assembled computer circuit boards according to instructions
- Performed precise equipment calibration to ensure product integrity was maintained
- Inspected, tested and installed electronic components and documented results; Identified faulty products and rerouted back to production line
- Applied coating, solvents and potting compounds to protect electronics
- Packaged finished products for safe shipment and applied correct labelling
- Compiled information and completed accurate data entry on red lights or assembly errors
Candidate Info
years in workforce
years at this job
Mechanical Assembler
Followed detailed assembly instructions, processes and procedures.
- Assisted in testing operation of completed product and retesting failed parts.
- Logged in final results of each product on the computer.
- Reported problems with quality, processes, equipment and materials to Production Supervisor.
- Built and repaired switchgears for the sensors.
- Communicated with operators of other shifts.
Candidate Info
years in workforce
years at this job
Mechanical Assembler
Performed final test quality assurance for YZ NJEX
- Assisted engineering staff with custom-designed odorant injection systems
- Helped plan and control inventory shortages
- Assisted with value-streaming production
- Wrote standard work and maintained document control for YZ products
Candidate Info
years in workforce
years at this job
Bsee
Electrical / Mechanical Assembler
Worked on production floor
- Performed mechanical assembly and wiring on pre-fabricated metal framework to build product
- Read and analyzed engineering schematics to complete assembly
- Competent with hand and power tools used in assembly process
- Unofficially assisted production engineers with updating and correcting mechanical and electrical schematics used on the production floor
- Completed IPC/WHMA-A-620 training, certified as a 620-A Application Specialist May 2012-May 2014
Candidate Info
years in workforce
years at this job
Accounting And Law Enforcement
Mechanical Assembler
Responsible for training young minds in the use of items in the aeronautical field such as: Winslow, counter-sinking, riveting, as well as the ability to read engineering drawings.
- Currently running the straps area, as well as working in part/mark seal certified, shipping/receiving, and assembly.
- A member of the safety board committee involved with making the workplace safe from June 2013 to present.
- Business recently awarded Start (Safety Through Achieving Recognition Together) status from the Washington State Labor and Industries program.
Candidate Info
years in workforce
years at this job
Electronic Mechanical Assembler
Worked in Clean Room Environment Class 2 approved by the FDA
- Maintained assembly of Vena Flow Devices for hospitals and medical facilities
- Trained and supervised new employees as well as inspected completed devices for mechanical reliability
- Worked in a fast pace high-pressure environment manufacturing devices with detailed fragile components
Candidate Info
years in workforce
years at this job
Electro-mechanical Assembler
Conducted final assembly and in process inspections of a complex mechanical energy storage device (9,000 lb. flywheel) per print and manufacturing instructions. Included the installation of a delicate 2,500 lb. rotor assembly, powerful lift magnet, shims, and bearing cartridge assemblies to within a 0.005 inch tolerance.
- Utilized a 5-ton overhead crane, hydraulic positioner, calipers, air tools, torque wrenches, depth gauges and volt meters as required.
- Assembled various sub-assemblies that included a lift magnet, castings, bearings, dampers, as well as multiple sensors and cables.
- Repaired flywheels per non-conformance report instructions.
- Assisted supervisor and engineering with flywheel process review.
Candidate Info
years in workforce
years at this job
Electro Mechanical Assembler
- Build and install machine related sub assemblies to include pneumatics, exhaust systems, cooling systems, gas recovery systems and cross trained in various other electro-mechanical assemblies and systems.
- Highly experienced in the sealing or joining of various materials and the hand tools and equipment needed for specific as well as general electro-mechanical assembly.
- Integral part of a Team that ensured 100% on time machine shipments to Customers the past 2 consecutive years.
- Responsible for the cross training of all new or temporary employees to reduce learning curves and increase productivity and quality.
- Selected to travel to Missouri (where all production is transferring) for two weeks to help train and set up the new 48,000 SF manufacturing facility.
- Supported the QA/Manufacturing Manager by identifying needs and carrying out the process of transferring products to Missouri, to include the picking and packing of all related materials.
- Contributed to the final transfer of all products concurrent with producing production machines two weeks ahead of schedule to prevent disruption to our Customers.
Candidate Info
years in workforce
years at this job
Mechanical Assembler
Perform all mechanical assembly of valve automation and actuator operations by using both electric power and hand tools.
- Possess good knowledge of assembly in oilfield equipment and parts.
- Read engineering drawings and specifications to build pumps and actuators for use in gas and oil industries.
- Built pneumatic and hydraulic power modules, hydraulic pumps, and valve actuators.
- Performed final testing on newly assembled actuators and pumps using pressure gauges and other equipment to meet engineering specifications.
Candidate Info
years in workforce
years at this job
Mechanical Assembler
Repaired and replaced defective and worn parts such as bearings, pistons, and gears, using hand tools, torque wrenches, power tools, and welding equipment.
- Recorded conditions of cars, and repair and maintenance work performed or to be performed.
- Removed locomotives, car mechanical units, or other components, using pneumatic hoists and jacks, pinch bars, hand tools, and cutting torches.
- Inspected and tested components such as bearings, seals, gaskets, wheels, and coupler assemblies to determine if repairs are needed.
- Inspected the interior and exterior of rail cars coming into rail yards to identify defects and to determine the extent of wear and damage.
- Adjusted repaired or replaced units as needed to ensure proper operation.
- Performed scheduled maintenance, and clean units and components.
- Repaired, fabricated, and installed steel or wood fittings, using blueprints, shop sketches, and instruction manuals.
- Repaired and maintained electrical and electronic controls for propulsion and braking systems.
Candidate Info
years in workforce
years at this job
Paralegal
Mechanical Assembler
Perform mechanical assembly according to work instructions and by following the organization instructions based in lean manufacturing principles.
- Ensure each check point and traceability of the component is collected and tracked properly in the computer system
- Follow the plan and schedule defined by the supervisor and production department.
- Follow instructions to keep and follow 5S methodology
- Cross training in different workstations and different generators models, if required.
- Complete other duties as assigned
Candidate Info
years in workforce
months at this job
High School Diploma
Elecro-mechanical Assembler
Assembled and set up electromechanical sub-assemblies in cases and cabinets.
- Conducted tests on assembled products to detect and repair faults.
- Operated and maintained hand & power tools, manufacturing machines and test equipments.
- Mounting all the electrical cable and fan to control the humid prior to shipment
Candidate Info
years in workforce
years at this job
Mechanical Assembler
Maintain inventory of product in work stations
- Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products
- Perform quality work checks to insure the product meets quality standards
- Identify product defects and complete appropriate documentation when defects are identified
- Rework and/or repair assembled equipment and products according to engineering specification changes
- Perform all work in accordance with quality standards and established safety procedures
- Maintain a clean and safe work area
Candidate Info
years in workforce
years at this job
High School Diploma
Mechanical Assembler
Performing basic sub-assemblies to final mechanical assemblies for the VCSU system. A vapor compression system unit that houses the hydraulic cooling system mounted on the M1A2 Abrams tank.
- Performing basic sub-assemblies to final assemblies of countermeasure and deployment systems such as arial tow targets.
- ATP certified through the company running ATP acceptance tests on hydraulic motors and pumps and final assemblies.
- Working with calibrated equipment such as calipers and micrometers to determine the accuracy of complete assemblies and parts.
- Brief electronic assembly including cable assembly as well as conformal coating of printed wire boards with humiseal.
- Insulating and polishing parts to drawing specifications.
Candidate Info
years in workforce
years at this job
Helicopter Transmission Maintenance Mechanic/mechanical Assembler
Responsibilities included the mechanical disassembly, cleaning, inspection, repair, and reassembly of all components specific to the CHI-107 Vertol aft transmission oil mix box and CH-47 engine transmission
- Completed all work in accordance with current FAA and foreign military guidelines
- Completion of all associated FAA and foreign military related paperwork
- Trained other personnel in all aspects of the overhaul process
Candidate Info
years in workforce
months at this job
Mechanical Engineering
Mechanical Assembler
- Certified of completion Solyndra Safety training
- Reorganized cables and tight in a bundle leads to the main network system
- Continued to add on further complicated components
- Installed and ran 20 ft-long optical wires through the aluminum pipe
- Ran 50 ft-long cables on top of chambers and connected to turbo fans.
- Assisted with both electrical engineer and mechanical engineer to run electrical wires, Smart UPS and mechanism assembly needed.
- Assisted Louis Madrid (Manager) and Kennedy Cheng in Fab 3 building to organize the cables, run 20 ft-long optical wires through a duct and installed challenging tasks with care.
Candidate Info
years in workforce
years at this job
High School Diploma
Mechanical Assembler
Follow established procedures while performing various operations in making sub-assemblies.
- Detect and reported improper operation.
- Maintain quality output while meeting department production requirements.
- Perform all small mechanical assembly operations by using hand tools and machines.
- Perform final testing on newly created equipment to meet engineering specifications.
- Use various types of measurement tools and gauging devices for accurate measurement.
- Help other co-workers carry out mechanical assembly related tasks.
Candidate Info
years in workforce
years at this job
High School Diploma
Medical Insurance Coding
Electronic/mechanical Assembler
Assembled and wired MLWD for down-hole drilling.
- Read and interpret details in wiring schematics.
- Fitting, mounting, alignment, adjusting operational testing, and repairs.
- Conduct continuity test on subs and complete assemblies and hydraulic well logging assemblies.
- Assisted in stockroom and the transition from Ft. Worth to Houston.
- Selected to work with team of engineers and draftsmen for prototype PCB's and down-hole tools for international project, Anaconda
- Selected for FTW Retention Incentive Plan including 30% retention bonus.
Candidate Info
years in workforce
months at this job
Engineering / Psychiatry
Mechanical Assembler
Assembled complete single/split flange drum/winch systems of various wire line truck designs such as Baker Hughes, NOV, Great Wall Drilling, and Schlumberger.
- Responsible for the fabrication and installation of various components such as Rexroth motors and valves, transmissions, accumulators, AC units, generators, and brake systems.
- Skillfully made modifications using measuring devices and methods required when necessary.
- Demonstrated quality assured production of systems.
- Completed function testing and/or troubleshooting on complete or faulty assemblies on every work order necessary.
- Responsible for the installation of the body to chassis, along with winch bay assemblies and systems.
Candidate Info
years in workforce
years at this job
High School Diploma
Electrician Certification
Mechanical Assembler
Modified and assembled evaporative thin film deposition equipment
- Red lined engineering assembly prints for all modifications performed
- Maintained tolerances and verified unit cohesion
- Intricate pipe bending eighth to half inch copper and stainless pipe
- Precision assembly of mechanical components
- Testing and troubleshooting of high vacuum components
- Shipping and Receiving domestic and international orders
Candidate Info
years in workforce
years at this job
Mechanical Assembler
- Inspected production
- Assembled by means of a fixture
- Reviewed previously completed operations by other team members
- Proactively fixed mechanical malfunctions
- Excelled on production line machinery and computers
- Carefully operated within standard operating procedures (SOP's) and Job Safety Analysis
Candidate Info
years in workforce
years at this job
Industrial Engineering Technology
Mechanical Assembler
- Assembled purchase and fabricated parts into sub-assemblies based on bill of material and custom drawings
- Operated various power hand-tools
- Communicated and problem solved discrepancies in processes, parts, etc as needed to improve operations
- GM Breaker, R Gear, MVC, retro fit, electrical wiring, reading wiring diagrams and schematics
Candidate Info
years in workforce
months at this job
High School Diploma
Mechanical Assembler
Bolt up values and flanges, torque down bolts, install belt guards and tubing on each units
- Operate overhead crane to hang pipes
- Set and level skids, scrubbers, bottle, etc.
- Cut, trims and files parts and verifies fitting tolerances to prepare for installation
- Inspects and test installed units, parts, and equipment for fit performance and compliance with standards using measuring instruments
- Locate and mark reference points and holes for installation using jigs, templates and measuring instruments.
Candidate Info
years in workforce
years at this job
Twic Certification
Mechanical Assembler
Assemble, install, modify, test, and maintain electrical, electronic, mechanical, hydraulic pneumatic equipment
- Read and interpret blueprints, wiring diagrams, assembly prints, and schematics
- Performs the assembly, start up, and function test of equipment systems
- Troubleshoots systems, makes necessary repairs and any corrections to systems
- Operate all necessary equipment including but not limited to forklift, overhead cranes and JIB cranes
- Prioritize work based on production schedule
Mechanical Assembler Resume Success Stories
