- Featured in:
More Instrumentation Technician Resumes
Use these Instrumentation Technician samples as a guideline or visit our extensive library of customizable resume templates.
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Additional Electrical Engineering Resume Samples
Instrumentation Technician Resume Samples
No results found
6-10 years of experience
Developed an excellent background in problem solving, working with individuals of varied backgrounds and experience, and identification as well as implementation of successful solutions. This position provided opportunities to improve my leadership abilities, allowing me to develop the skills of others relative to the operation of this equipment.
- Experience in troubleshooting, programming and repairing: robotics, pneumatics, PLC's, temperature controllers and sensors, batch controls, raw material controls, furnace controls and conveyer controls, resulting in increased productivity and less downtime.
- Ensured effective and continuous 24 hr. operation of all control systems throughout the plant.
- Performed preventative maintenance, field repairs and parts ordering.
- Completed evaluation and modification of control systems including PLC programs, resulting in increased system efficiency and safety.
- Diagnosed control system problems using manuals, schematics and various test equipment.
- Operated and maintained pollution monitoring system that helped the company to make millions in NOX credits.
0-5 years of experience
Responsible for process control instruments scheduled calibration, maintenance, troubleshoot and repair. Assist with systems start up and validation.
- Performed calibration, maintenance and equipment service work orders utilized CalMan 4.2 calibration manager.
- Wrote and revised instruments calibration SOP and instruments specification.
- Developed fixtures to accommodate to instruments calibration need.
- Archived instruments calibration specification sheets to electronic PDF files (paperless project).
- Assisted with QA engineers to validate the networked Yokogawa paperless chart recorder/data logger for remotely monitor all production purified water tanks; CalMan 4.2 calibration manager; Homogenizer; Large walk-in cold storage chamber.
0-5 years of experience
Performed troubleshooting and planned maintenance on basic electronic, electromechanical or medical equipment following current standards
- Under supervision, evaluated basic customer biomedical equipment issues, implemented appropriate repairs, performed planned maintenance (PM), safety, and environmental inspections and maintain effective customer relations.
- Followed appropriate GE policies and procedures
- Ensured proper care of spares, tools, test equipment and ensure calibration.
- Enhanced and maintain technical knowledge of current standards, codes and procedures regarding safe and effective use of medical equipment through formal instruction.
0-5 years of experience
Performed routine repair, calibration and maintenance work such as, but not limited to, lubrications, simple fabrications, parts cleaning, instrument and control repair, assembling, disassembling less complex parts.
- Assisted higher classified personnel in the installation, testing, calibration, troubleshooting, adjustment and maintenance of all types of instrumentation and control circuits and devices used in the plant.
- Performed other related or lesser skilled duties for which he/she is qualified or has received proper instruction or direction.
- Used hand or power tools, measuring, and test equipment such as rulers, micrometers and bench test equipment.
- Performed paperwork necessary for preparation and closeout of assigned tasks.
0-5 years of experience
A manufacturer of corn-based products for food, pharmaceutical, and personal care markets, alcohol for beverage and industrial use, and animal nutrition ingredients.
- Performed daily and preventative maintenance and troubleshooting on plant-wide electrical and instrumentation systems.
- Supported operation, maintenance, and upgrades of on-site steam generation facility.
- Coordinated and directed shift Electrical & Instrument maintenance of production facilities.
- Conducted training of E&I personnel, both in organized and on-the-job environments.
10+ years of experience
During 12-hour tour, I perform advanced troubleshooting and use problem solving techniques to keep high-speed paper production and finishing equipment running. My role demands strong PLC, DCS and process control competency as well as setting priorities and decision-making to be successful.
- Service vast array of technical equipment, devices and controls. Utilize a wide variety of test equipment and tool to diagnose problems.
- Provide courteous and competent service to personnel at many organizational levels. Demonstrate interpersonal skills with hourly, salary, & management levels.
- Communicate verbally and through electronic media. (Lotus Notes, SAP, Outlook)
- Analyze and assess equipment for root cause failure determination.
- Completed 3 year instrumentation training as requirement of merging crafts.
- Led, coached and participated in Rapid Action Teams for LSS safety initiatives.
- Completed Rapid Lean Six Sigma yellow belt certification training.
0-5 years of experience
Provided calibration and instrumentation support for processes and operations in a cGMP manufacturing setting. Executed scheduled calibrations on instrumentation and control devices in compliance with facility procedures and work instructions. Maintained and restored critical production equipment to fully operational status by performing preventive and corrective maintenance.
- Worked closely with Quality, Engineering and Operations groups to ensure strict compliance with GMP guidelines at all times, specifically to ensure that equipment is maintained in GMP compliance.
- Maintained and performed corrective, preventive maintenance calibrations on GMP and non-GMP equipment.
- Used tools and software (CMMS, PAS, PLCs) required to resolve equipment and process issues within all technical competencies.
0-5 years of experience
Knowledge and experience reading Piping and Instrumentation (P&I) Diagrams and Auto CAD drawings. Effectively reviewed and interpreted piping and instrumentation symbols and abbreviations; ensuring proper instrumentation and piping connection.
- Successfully and safely installed various types of pressure transmitters, temperature transmitters, flow transmitters, and pneumatic instrumentation onto oil and gas modules.
- Exhibited safe tube bending and connection techniques using various sizes of stainless steel tubing for instrumentation; single and multiple tubing lines. Applied mathematical aptitude to ensure an accurate radius measurement for tube bending.
- Installed pneumatic airline using various sizes of carbon, galvanized, and stainless steel pipe
- Displayed advanced knowledge of job safety analysis procedures and worked safely without incident in production area.
0-5 years of experience
Troubleshot, maintained, installed and repaired all instrumentation involved with waste water treatment plant facility and high pressure steam power plant.
- Calibrated and maintained all analytical instrumentation.
- Setup and configure new instruments.
- Programmed Allen Bradley 525 PLCs and developed and maintained Control View Human Machine Interface.
0-5 years of experience
- Responsible for the calibration, maintenance, troubleshooting, and quality control for analytical instrumentation related to the conversion of cellulosic feedstocks into ethanol.
- Instrumentation includes 5 HPLCs, 2 GCs, ion chromatograph, and TOC.
- Provide troubleshooting, training, and maintenance support for the above instrumentation, automatic titrators, PSA, centrifuges, and any other equipment.
- Organized and scheduled preventative maintenance for the instruments, including coordinating with outside vendors when necessary.
- Served on the Site Safety Committee for 2.5 years, also serving as Chair for 2014 and 2015.
- Assisted in setup of HPLC and GC instrumentation at new lab in Nevada, IA.
0-5 years of experience
Integrated data acquisition systems (DAS) into mobile trucks or vans to provide predominately video (digital and analog) and digital data acquisition capability (Telemetry Data) at remote locations to support Army Unmanned Aviation Systems (UAS/UAV) tests in conjunction with Joint Attack Munitions Systems (JAMS).
- Provided network design input, assisted in material procurements, fabricate, integrate and checkout data acquisition systems. Provided test operations at the local Software Engineering Directorate (SED J-SIL) and remote test sites, including test setup, checkout, data acquisition, equipment test & data verification and equipment disassembly activities.
- Generated electrical drawings, mechanical drawings, and bills of materials (BOM) for custom configurations. Acquired appropriate instruments and other components to meet design specifications. Provided system/network administration and testing at SED J-SIL.
- Automated test data collection and organization. Developed an information assurance plan for protecting critical data using RAID 5 configurations and automatic archiving.
- Experience working with high speed fiber optic networks, Cisco switches and infrared (IR) video collection. MOCC (Mission Operations Command and Control) training at US Army Redstone Test Center (RTC). Familiar with network analysis tools such as Wireshark.
0-5 years of experience
Work as a PRN agent for GE replacing parts on medical equipment and keeping tally of all conversions of a total medical building.
- Travel to assigned hospitals\facilities converting connections on the medical equipment and assisting in the in-service training for the medical personnel.
- Working closely with administrators making sure the conversions are without complications.
- Also interact with purchasing dept. to make sure every piece of equipment in the medical facilities has been converted\replaced.
10+ years of experience
Calibration and troubleshooting of a wide variety of instrumentation in accordance with customer manufacturers'
specifications and procedures. Coordinate field calibrations and schedules of calibrations.
- Comply with company policies and procedures, customers, and government policies, requirements and regulations for calibration, time and material, and record keeping.
- Implemented and programmed ProCal V5.
- Preparing calibration certificate, labels and documentations in Cristal Report for ProCal V5.
- Preparing Calibration Procedures.
- Training for new employees in areas such as Pressure, Temperature, Humidity, Four to Twenty transmitter, Oxygen
- Promote continuous quality improvement processes and meet profitability goals and customer expectations.
0-5 years of experience
Duties include installation, calibration and maintenance of many types of instrumentation and associated Programmable Logic Controllers. Documenting and organizing all data, including audit reports and data sheets in compliance with ISO 17025 standards.
- ISA Certified Control Systems Technician with clean driving record and a TWIC card
- Calibration and troubleshooting experience with various instruments like: pressure gauges/transmitters, thermometers (RTDs and thermocouples), level transmitters, flow meters in the field as well as in a lab.
- Consulted on client-specific process control instrument and equipment issues.
- Experience in different environments such as clean-room, manufacturing plants, power plants (nuclear, gas, coal, trash-to-steam) and water treatment plants.
- HART communication protocol experience as well as Yokogawa's communicators
- Developed solutions and conducted in-depth troubleshooting for failed instruments.
0-5 years of experience
- Performed instrumentation calibration, troubleshooting, and repair work.
- Maintained accurate documentation of all repairs and calibrations.
- Prepared technical reports for equipment verification (as required).
- Evaluated equipment performance and recommend improvements.
- Performed troubleshooting to electronic, intelligent smart and foundation fieldbus
0-5 years of experience
- Performed inspections, testing, service, repair, calibration and installation of recording and automatic control instruments such as flow meters, pressure gauges, thermometers and regulators in a power generation station.
- Operated various test equipment to measure temperature, pressure, voltage, flow and other plant processes during normal operations and scheduled outages.
- Coordinated projects with outside vendors to upgrade and replace outdated or malfunctioning systems in the plant to improve plant performance.
- Used SAP maintenance system to log repairs and to red line CAD drawings of any system changes.
0-5 years of experience
Responsible for installing and implementation of instrumentation parts during and throughout the manufacturing process of gas turbines.
- Proficient in resistance "tack" welding for securing instrumentation parts.
- Tasked with handling proprietary documentation used for manufacturing processes and recording of instrumentation data into excel spreadsheets.
- Responsible for the safe handling/shipping of instrumented parts to designated facilities.
- Perform other duties as assigned by management.
0-5 years of experience
- Calibrated equipment and recorded calibration data to maintain accuracy throughout the plant
- Performed preventative maintenance on a regular basis while utilizing LOTO procedures
- Designed a collection tank system to improve efficiency, eliminating a manual procedure
- Received the Partner Achievement Award for improving efficiency of the overall process
- Developed documentation including work instructions, SOPs, training and troubleshooting guides
- Worked with contractors to update P&ID's and when necessary update the installation
- Performed shift lead duties including assigning and prioritization of tasks
10+ years of experience
Plan and schedule own work activities and coordinate work for technicians to minimize impact to production activities.
- Assist in start-up of new equipment to ensure it meets all instrumentation design specifications.
- Perform advanced calibrations of instruments on process, QC, and utility equipment.
- Responsible for interviewing of potential new technicians within Metrology.
- Extensive experience in all areas of safety training including, but not limited to the following: Lockout/Tagout, Confined Space, HAZMATand MSDS procedures.
- Perform calibrations, maintenance and troubleshooting on Foundation Fieldbus DCS System.
0-5 years of experience
Maintain calibration and PM schedule within a 21 CFR Part 11 compliant database
- Knowledgeable in GxP's including cGMP and GDocP and their relevance in a quality minded environment
- Utilize Allen Bradley PLC interface to monitor and troubleshoot instrumentation used in pharmaceutical manufacturing
- Initiate deviations and CAPAs to identify potential improvements and eliminate non-conformities
- Compose and modify new and existing SOPs to adhere to quality and manufacturing goals
0-5 years of experience
Perform preventive maintenance, repair, and calibrations on autoclave sterilizers, ovens, washers, heat exchangers, refrigerators and freezers according to standard operating procedures.
- Troubleshoot and repair equipment in accordance with GMP and GLP standards.
- Perform lockout / tag out safety procedures
- Communicate with clients on the repair process.
- Work with various OEM vendors to improve the quality of procured equipment.
- Detail and submit documentation on all work using proper in lab equipment logs and SAP.
0-5 years of experience
Install instrumentation for testing of explosive effects on structure.
- Install instrumentation for testing in laboratory setting.
- Acquire data from explosive testing using various data acquisition equipment ( Hi-Techniques Win 600, MeDac )
- Data acquired includes pressure, deflection, load cell, accelerometer, strain and temperature data.
- Maintained documents related to test data.
- Compose reports and briefing data from acquired data.
6-10 years of experience
Responsible for PCS craft scheduled work orders including preventive maintenance, repair and project assistance for new freeze dryer (B81)
- Supported and supervised contract instrument technicians during shutdown on B-49/A, B13 and B81.
- Responsible for preventive maintenance, calibration, troubleshooting and repair of instrument on freeze dryers, sterilizers, fermentors, vial rinse and fill line equipment, particular counter and vacuum system, and utility equipment including water system, boilers, air compressor, RO system, clean steam generator
- Responsible for completion of all work orders and verifying completion of work and documenting discrepancies and Out of Tolerances.
0-5 years of experience
Shadowed and supported Instrumentation Technicians.
- Performed task assigned by direct supervisor or assigned mentor.
- Safely learned the skills and job responsibilities required to be an Instrumentation Technician.
- Followed all procedures properly (operating, reporting, and safety).
- Maintained good housekeeping.
- Attended all plant wide safety meetings and area critical training.
0-5 years of experience
Installed, monitored and maintained instrumentation, process controls, data acquisition systems and electrical systems
- Performed troubleshooting and repair of instrumentation, process controls, data acquisition systems and electrical systems
- Interpreted results of calibrations and test data
- Fabricated and installed test equipment using hand tools, power tools, and test instruments
- Adjusted, repaired and replaced faulty components in test setups and equipment
- Connected and verified instrumentation including pressure transducers, thermocouples, accelerometers and cameras
- Read and interpreted planning documents, schematics, wiring diagrams, blueprints and engineering drawings
- Collaborated with design engineers to troubleshoot failures and issues derived from test data
0-5 years of experience
Responsible for repair, maintenance and calibration of temperature, flow and level sensing devices
- Perform electrical installation repair and PM on facility power distribution, lighting and ventilation.
- Install, troubleshoot and program at the ladder logic level Rockwell Control Logix and PLC5 controllers networked over an Ethernet topology using Stratix 8000 switches.
- Install, repair and maintain variable frequency and servo synchronized drive systems using Rockwell PowerFlex 40 and 700 VFD's and Kinetix 3000 and 6000 servo controllers.
10+ years of experience
Responsible for PLC programming and Human Machine Interface development and management for waste water treatment plant, using Allen Bradley PLC 540 and Contrologix with Factory Talk View software.
- Troubleshoot/repair/maintain and install VFCs.
- Troubleshoot/repair and maintain high and low voltage MCCs, motor starters and exciters.
- Trained lower level technicians.
- Worked closely with operational and engineering staff to improve plant process control.
- Implemented controls that saved thousands in chemical usage.
- Optimized HMI programs to work though Y2K and extended life of system for ten years.
- Calibrated control loops.
- Supported server installations and support including Ethernet switches and updates.
0-5 years of experience
Fabricate, install, maintain and troubleshoot Instrumentation, communications and control circuits for space vehicle and ground support equipment.
- Routinely wire entire circuits end to end. Layout and build electrical cabinets and junction boxes from engineering drawings and instructions.
- Build electrical cabling using various different connectors (Deutsch, ITT, Amphenol, Powell, RJ45 and Mil Spec).
- Devices and equipment used include electromechanical cryogenic valves, limit switches, RTDs, thermocouples, signal conditioners, and pressure transducers.
- Read, comprehend and implement drawing modifications as well as new installs as needed.
- Request drawing changes so that theory of operation matches practical installs and best practices for space operations.
- Tools associated with regular tasks included digital and analog voltmeters, meggers, Cirrus tester, crimpers, strippers, insertion/removal tools, soldering irons.
- Serves as the Lead Launch Instrumentation Technician with responsibility to work with, develop, plan, and provide work assignments to lower level employees.
0-5 years of experience
Troubleshoot electrical equipments controlled by PLC systems throughout the plant.
- Program and calibrate instrumentation systems.
- Perform preventive maintenance as assigned.
- Ensure a safe and sanitary work environment at all times.
- Maintenance management program.
- Electrical projects throughout the plant.
- Program logic ladder using digital and analog inputs/outputs.
- Resolve plant requests for assistance with variety of power system related maintenance and operation issues.
0-5 years of experience
Completed 38 month instrumentation training program by testing out and passing all written and on the job field tests in just 4 months
- Installed the first Fiber Optic system used by [company name]
- Performed calibration of process controls and monitoring systems including flow meters (Yokagawa, Foxboro, Rosemount, D/P Cells with orifice sections, Krohne (coriolis meters, temperature and density meters), level detection meters (guided wave radar, sonar and D/P Cells), temperature devices (RTD thermocouples and infrared)
- Responsible for installing, rebuilding and troubleshooting both piston and diaphragm automatic control valves, valve positioners, I/P and single loop controls.
- Troubleshoot instrumentation and electrical problems with multi-meters, ohmmeter, amp meter and voltage meters, PLC's and DCS systems, Emissions control systems, CEMS and handheld devices, H2S monitors, Hn3 monitors, Co monitors and Co2 Siemens analyzers. Use of HART communicator and BRAIN communicator plus FSSS basic knowledge and telemetry using radios to receive and transmits start and stop functions and critical information.
- Install, assemble and repair RF cables and antennas. Install and maintain all Fiber Optic systems.
- Trained new technicians on plant operations and safety rules set by [company name].
0-5 years of experience
Instrument prototype civilian and military equipment for the purpose of data acquisition for design improvement.
- Calibrated measurement devices including but not limited to, accelerometers, pressure transducers, wheel encoders, torque transducers, thermocouples etc
- Use of signal conditioners, amplifiers and various recording devices.
- Design and fabricate specialty test equipment, instrument racks and brackets in order to meet specific test parameters.
- Performance of Ride Quality, Accelerated Life, mobility, durability, EMI and environmental tests.
10+ years of experience
- Functioned as a lead to a workgroup of staff and provided expertise on complex or difficult issues.
- Provided training to Air Quality Instrument Technicians.
- Repaired and maintained a wide variety of air quality related instruments in accordance with EPA requirements.
- Reviewed and edited instrument data from network computer for accuracy.
- Conducted site surveillance and assisted in new site setup and construction.
- Performed quality assurance checks on air monitoring instrumentation.
- Kept records of quality assurance tests in accordance with EPA requirements.
- Assisted in creating and updating technical air quality instrument operational procedures.
- Took a prominent role in the implementation of new air monitoring instruments.
0-5 years of experience
Perform calibration and repair of analytical instrumentation used in biopharmaceutical manufacturing processes.
- Perform calibration and repair of industrial process control instrumentation.
- Followed cGLP and cGMP guidelines and regulations.
- Follow and perform all safety measures to maintain a safe working environment.
- Respond to trouble calls and provide immediate response.
0-5 years of experience
Served at Wright-Patterson Air Force Base, Air Force Research Laboratory as an instrumentation and service technician to perform the following primary functions:
- Fabrication, installation and maintenance of sensors and sensor interfaces used to evaluate the aeromechanical and aero thermodynamic properties of turbine engine compressors.
- Design, fabrication, repair and maintenance of specialized test equipment.
- Thermocouple fabrication and installation.
- Strain gage/Kulite/pressure sensor/load cell installation and checkout
- Crane operations, forklift operator.
- Performed the function of "Control Operator" during testing operations.
0-5 years of experience
Troubleshoot and repair general instrument including various pressure, temperature, level, and flow sensing devices.
- Troubleshoot, change and force PLC logic and Honeywell DCS points.
- Assist Electrical Technicians with troubleshooting by researching control systems for individual devices and their effect on the process.
- Preventive maintenance on control systems and instrumentation systems.
- Troubleshoot, maintain and calibrate Thermo Scientific continuous emissions monitoring systems including: Nox, CO2, CO, SO2, and mercury systems
- Maintain analyzers for steam cycle water purity monitoring system including: dissolved O2, Hach silica, Orion chloride, and Rosemount ph analyzer systems.
10+ years of experience
- Specialize in servo hydraulic calibration along with programming test configurations using station builder, creating calibration files and producing machine cabling following blueprints.
- Troubleshoot actuators, hydraulic power supplies, circuit boards, load cells and torque cells.
- Repairing transducer cables, strain gauges and slip rings using a soldering iron.
- Assist control engineers, electrical engineers, mechanical engineers and machine repair to effectively conduct new installations of equipment and machine troubleshooting for current machines earning outstanding reputation for proficiency, sense of urgency and quality.
- Calibration of test lab instruments adhering to ISO 17025 standards.
- Trained eight new employees by instructing and guiding them to fully understand and utilize standard procedures and work practices.
6-10 years of experience
Electrical and mechanical technician responsible for all electrical and mechanical equipment and control systems associated with a large scale drinking water distribution system.
- Responsibilities include and are not limited to installation, maintenance and repair of electrical power and lighting systems.
- Installation, maintenance and repair of chemical delivery systems.
- Provide expertise and assistance with system shutdowns and start-ups.
- Maintain and troubleshoot and repair emergency power generators ranging from 50kw to 2.5 mw operating at voltages from 480v to 13.2 volts.
10+ years of experience
Repair AN/PRC-77 radio, the VRC-46 radio, the AN/TVS-5, AN/PVS-4, AN/PVS-7, AN/PVS-14, and the AN/PVS-5A, B, and C Model Night Vision goggles and scope, the AN-2060, Antenna Matching Unit, AN/GRA-39 Radio Set Control.
- Forklift driver for supply and the electronics shop.
- Responsible for making labels for various night vision goggles and scopes.
- Responsible for screen printing the M8A1 Chemical Detector.
- Responsible for running the Physical Security Room.
- Responsible for shipping and receiving related equipment.
0-5 years of experience
Perform pre-commissioning / commissioning tasks.
- Competent in reading and interpreting P&ID's and Wiring Diagrams.
- Troubleshoot PLC's and PLC components: Yokogowa, Bently Nevada 3500, Siemens.
- Loop checks, calibrations, and troubleshooting of instrumentation field devices involving level, pressure, temperature, flow, and vibration. Brands such as: Rosemount, K-Tek, Nuflow, Rotork, Bently Nevada, etc.
- Consult with Control Room Operators and Programmers for loop check verifications and completions of Shell Commissioning Procedures.
- Test/Troubleshoot Fire and Gas devices.
- Cause and Effects Matrix and testing.
10+ years of experience
Modify PLC programs using RSLogix and Step 7 software.
- Calibrate instruments and production equipment i.e. temperature controllers, load cells,
- Maintain blue Mountain calibration manager software, i.e. adding equipment, adding users, upgrading database.
- Troubleshoot and modify and maintain pharmaceutical manufacturing equipment.
- Scheduling vendors for calibrations and repairs of equipment.
- Assisted with validation of machinery, writing SOP, investigating quality alerts.
- Purchased spare parts.
0-5 years of experience
Terminate and install discrete (Foundation Field bus and Device Net) network components.
- Troubleshoot Device Net devices and network components.
- Troubleshoot Foundation Field bus devices and network components.
- Terminate electrical panels.
- Assisted Delta V DCS troubleshooting.
- Verify Delta V DCS installation is in compliance with the designed drawings.
- Install cable for power and lighting.
0-5 years of experience
Installation of RIGWATCH real-time data acquisition systems on drilling rigs.
- Installation and aiming of satellite systems.
- Perform surveys of drilling rigs to determine the required hardware configurations.
- Wiring and testing of systems prior to installation.
- Testing and troubleshooting of data acquisition hardware and software after installation.
- Provide 24 hour on-call technical support of field installations.
- Responsible for inventory control of field equipment.
0-5 years of experience
- Position consisted of working maintenance for Phillips 66/Excel Paralubes
- All aspects of instrumentation maintenance which includes preventative maintenance, installation, troubleshooting, and repair
- Instrumentation included installation, loop checks, setup/calibration of a wide variety of equipment consisting of flow, pressure, speed, and temperature control
- All aspects of electrical and instrumentation, capital and projects which included new installations, PLC to DCS upgrades and cut overs, QA/QC inspections, medium and large scale terminations
- Performed work according to prints, drawings, loop sheets P&ID’s and verbal instructions
- Analyzer experience
0-5 years of experience
Routed, terminated, and secured thermocouples and pressure transducers throughout vehicles
- Soldering and spot welding
- Heat management, installed thermocouples, and probes throughout the entire vehicle such as exhaust, coolant system, PCM, etc.
- Verified hot and cold checks of thermocouples and transducers, instrumentation, tray assembling and Instrumentation equipment installation for dynamometer testing, including pressure testing and vehicle disassemble / assembly of mechanical parts
- Diagnostics and troubleshooting circuits and wire harness assembly
0-5 years of experience
Responsible for maintenance on emissions monitoring system (CEMS)
- Responsible for calibration and upkeep of plant instrumentation
- Extensive experience working with refuse cranes
- Troubleshooting voltage systems ranging from 0 - 4160 volts
- Installation and upkeep of general plant systems
0-5 years of experience
Provide on-site calibration services to [company name]- San German, P.R.
- Responsible of performing calibration and troubleshooting to facilities and manufacturing equipment.
- Calibrations of instruments related, but not limited, to temperature, pressure, relative humidity, time, pH, level, flow and rpm.
- Inspection of tools, such as: nozzles, pin gauges, stent-holders, alignment cones, Teflon posts and measurement blocks.
- Basic scale calibration and troubleshooting knowledge
10+ years of experience
Instrumentation and electrical maintenance and support in Pulp and Paper facility
- Repair, calibration, troubleshooting, and preventative maintenance of paper industry equipment
- Utilized dew point air analyzer and CLO2 analyzer for bleaching process
- Worked with Kamyr digester, Diffuser washer, overhead cranes and other pulping equipment
0-5 years of experience
Work on many different types of prototype vehicles including compressed natural gas (CNG), propane, hybrid, google (self-drive) and electrical
- Calibration of prototype vehicles
- Troubleshooting electrical devices, for example transducers and potentiometers
- Install wire harnesses and temperature control devices
6-10 years of experience
- Responsible for set-up of scale model cars and auxiliary electronic equipment in rolling-road wind tunnel.
- Responsible for set-up of full size racing cars on 7-Post suspension testing rig.
- Responsible for operating software used during test for collection of data.
- Directly involved in the use and maintenance of force balances, accelerometers, pressure scanners, anemometers, stepper motors, and other electronic hardware, e.g. used for aerodynamic and vehicle dynamic testing purposes.
- Responsible for maintenance of mechanical, hydraulic, and pneumatic systems in testing facility.
0-5 years of experience
Performed routine maintenance checks, replaced switchgear up 2,300 volts, calibrated, and replaced solenoid control valves.
- Troubleshooting and Preventive Maintenance on PLC's
- Support the continuous operation of electrical and mechanical systems within the companies operation through preventive, predictive and corrective maintenance to ensure maximum availability of the electrical and mechanical systems
- Support the operation and maintenance of electrical and mechanical systems company wide
- Review assigned work orders (corrective, preventive, and predictive) and if needed, follow-up with the Supervisor or Lead Technicians for additional information and details
- Execute and document the assigned work orders, following the Standard Operating Procedures (SOPs) for each piece of equipment
- Coordinate work assignments and repairs with the Maintenance Planners, the Lead E/I Technicians, and other crafts as needed
- Respond to emergency alarms for the Process Control Systems
- Demonstrate a technical knowledge of the operation, troubleshooting, maintenance, basic programming and configuration, and repair of the following plant electrical, instrumentation, and manufacturing systems:
Electrical Engineering Cover Letter Examples
