- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Cad Engineer Resume Samples
No results found
Candidate Info
years in workforce
years at this job
Mechanical Engineering Technology
Automotive Technology Certification
CAD Engineer I\manufacturing CNC Programmer
Designed patient specific knee implant instrumentation used by surgeons to perform partial and total
knee replacements for individuals with osteoarthritis
- Assisted in launch of partial and total knee replacement brands iUni G2 and the iTotal 2.0 by providing necessary
- Improved surgical plan design time by 30%; increasing design and peer review efficiency for iTotal surgical
- Reduced manual processes by designing library features to increase production efficiency.
- Collaborated with manufacturing department to develop CNC programming for the manufacturing of patient specific tibial trays using MasterCam CNC software
- Recruited and trained incoming Co-op students and full time CAD Engineers on the design process of patient specific knee implant instrumentation
Candidate Info
years in workforce
years at this job
Certificate
Computer Art
CAD Engineer
Created design presentations of plans utilized in the building of LAN, WAN, and wide broadband high-speed networks
- Participated in GIS accurate maps of wireless tower sites, cities and state geographical data
- Developed 3D renderings and orthographic layouts of buildings, tower sites and antennas
- Assisted web developer to integrate CAD drawings onto the Internet
- Received verbal praise from supervisors as well as strong written performance reviews
- Created detailed drawings for inside/outside layouts of structural buildings and other special projects
Candidate Info
years in workforce
years at this job
Cad Technology & Manufacturing Sciences
Mechanical
CAD Engineer
Provided CAD support for engineering, manufacturing and maintenance departments of a steel recycler/mill with 300 employees.
- Maintained all CAD operations, CAD peripheral equipment, CAD files and paper files; managed all engineering documents for centralized document management system.
- Updated existing drawings, revised equipment designs and created new drawings.
- Managed contract crews through project completion for facility upgrade projects.
- Provided necessary drawings and other engineering documents to assist in facility changes/repairs.
- Facilitated training for AutoCAD, graphics programs, graphics equipment & other computer programs.
- Played a key role in introducing using a scanner, transitioning from paper to electronic files.
Candidate Info
years in workforce
months at this job
High School Diploma
Vocational Degree
Education And Training Experience
CAD Engineer
Generated single and three line AC and DC schematics.
- Incorporated data into the assembly drawings for drilling plans, wire lists and nameplates.
- Wrote 2 manuals one for in-house CNC machine and a completed boat owner's manual.
- Created and established a proprietary numbering system for drawings.
- Maintaining the ECO's and extensive Bill of Materials.
- Calculated cable lengths for the wiring harnesses.
- Reduced costs of cabinets by researching a part by buying directly from the manufacture.
Candidate Info
years in workforce
months at this job
Mechanical Engineering
Mechanical Engineering
Computer Aided Tool Engineering
CAD Engineer
Design and Development of various components for automobiles.
- Modeled various automobile parts like sprockets, rear view mirrors, mufflers, trailers and footrests using Pro/E.
- Modeled various assemblies, performed detailed part drawing and assembly drawing using Pro/E.
- Production drawings and BOM generation for assembly process.
- Created 2D and 3D drawings and 3D modeling of various components like garbage containers, custom fencing and sign boards using Pro/E Sheet Metal.
- Fabrication of components using lathe, welding and press brake.
- Optimized flow of supplies and maintained accurate records and managed office correspondence.
Candidate Info
years in workforce
year at this job
Bachelor of Arts
Senior CAD Engineer/ Department Manager
Established a CAD department and created processes and procedures for the implementation of all PCB related activities
- Designed high density /high speed multilayer surface mount printed circuit boards using fine line, micro and blind/buried via technology
- Established and implemented DFM rules in accordance with company PC board testing and manufacturing tools resulting in lower production cost
- Evaluated and engaged external printed circuit board manufacturing vendors to ensure quality and manufacturability of all PCB's
- Interfaced with company manufacturing and assembly divisions
- System and network manager for Sun based Zuken Visula design system
- Supervised CAD department personnel, managed hiring, training and employee performance evaluations
Candidate Info
months in workforce
months at this job
Mechanical Engineering
Mechanical Engineering
Cad Engineer Trainee
Created assembly drawings, including bills of materials and detail drawing, for machining, assembly, welding, and gaging.
- Evaluated and adjusted new designs and detail drawing to ensure practical completion while adhering to customer standards for usage and bottom line expenditure.
- Involved in 2D-detailing of part like bearings, pipe fittings and truss joints using AutoCAD 2000.
- Involved in designing solid modeling, detailing and assembly of engine components using Pro/E wildfire.
Candidate Info
year in workforce
year at this job
Mechanical Engineering
Mechanical Engineering
CAD Engineer
- Designed and analyzed life of various mechanical components as engine cylinder, pistons, piston rings, crank and cam shafts, gears, bearings, couplings, sprockets, shafts and fasteners of a gearbox
- Prepared drawings of various components and applied GD&T techniques
- Performed diverse engineering activities required for new product evolutions and designs
- Reviewed engineering design specifications and developed simplified and cost effective designs
- Analyzed the packing and manufacturability issues between components at Product development phase
- Developed and updated BOMs, ECNs and drawings for an estimated 3000 components
Candidate Info
years in workforce
years at this job
Mechanical Engineering
CAD Engineer
Design isolated phase bus for direct connection between large power generators and transformers.
- Responsible for the layout and design of electrical bur bus and cable bus, including details, references, fabrications, purchasing and assembly drawings, Bills of Material for project, and new item request from sales and customer.
- Organized and prepared fabrication documents such as Engineering Item Router, Job Router and
- Checked and finalized all drawings for issuance.
- Created 3D models and template development for preparing the drawings.
- Revised and tracked existing drawings.
Candidate Info
years in workforce
years at this job
Mechanical Design & Fabrication
Landscape Design And Management
Landscape Designer - Manager - Estimator - Microstation/cad Engineer
- Managed and created exponential growth in the CAD department
- Utilized AutoCAD 2010 to prepares design projects
- Penciled/Redlined various residential projects
- Prepared, designed, and estimated 25+ acre projects for Commercial/Residential/Industrial clients
- Developed business relationship with various industry professionals and clients.
Candidate Info
years in workforce
months at this job
Mechanical Engineering
CAD Engineer
Prepared hydro-turbine drawings for government approval with the required paint and material inspections.
- Re-designed existing components for hydro-turbine rebuilding according to the government guidelines.
- Recorded and organized in-field measurements for re-designing purposes.
- Presented pressure piping, valve components, and turbine/generator parts in Auto CAD.
Candidate Info
years in workforce
years at this job
Msee
IC Verification/ CAD Engineer
Analyzed system requirements, capacity and project needs to determine feasibility of project and developed system plans. System and block level verification. Created a uniform project environment across multi geographic sites. Analyzed and revised digital IC design flow for better CAD methodologies. License management for various digital tools.
- Integrated the GPS module in the baseband. Developed verification test bench in C code for module verification to decrease defect count and improve performance.
- Wrote test stimuli in Vera, C, and Verilog for block and system level verification, leading to decreased defect count and improved functionality.
- Implemented random constrained methods of test bench verification with assertions, Included hooks to test bench for running code coverage. Maintained the design and test bench database under configuration management. Regular regression runs.
- PERL scripting for test bench maintenance.
- Analyzed various tools and digital design software for the multi sited design community and provided backup requirements.
- Supported, planned and implemented different EDA tools.
- Implemented a uniform project/ tool environment for the multi-sited design group.
Candidate Info
years in workforce
years at this job
CAD Engineer II
Prepared complete sets of complex drawings, which include multiple views, detail drawings, and assembly drawings using Autodesk AutoCAD & Inventor 5.3.
- Initiate solutions to a variety of contractual problems of complex latitude and difficulty.
- Create and Maintained bill of materials as they pertained to each drawing package.
- Submit and control documentation according to contract schedule. Work with technical writer; confirm documents for clarity, format, and agreement with project requirements.
- Worked from sketches, and verbal information surveyed to determine the most appropriate views, detail drawings, and supplementary information needed to complete assignment.
- Utilized Site Survey sketches, models, as well as verbal information supplied by an engineer, or designer to determine the most appropriate views, detail drawings, and supplementary information needed to complete assignment.
- Designed 3 dimensional and 2 dimensional drawings showing all intricate detailed parts as they are used in and made necessary updates as they pertained to installations.
Candidate Info
years in workforce
years at this job
Certificate
Management
CAD Engineer
Produced weekly progress & status reports for all projects.
- Met and outlined projects with project managers for auto-cad as-built drawings.
- Developed Cad drawings for HVAC and plumbing.
- Coordinated and drafted drawings for telecommunication implementations.
- Created Auto-Cad presentation drawings from project manager sketches.
Candidate Info
years in workforce
years at this job
Mechanical Engineering
CAD Engineer Supervisor
Responsible for investigating non-conforming materials and ensuring corrective actions.
- Review and approve engineering design changes for CAD manufacturing.
- Develop and implement manufacturing processes for CAD manufacturing.
- Author and update process protocols, and ensure methods are being followed.
- Collaborate with the R&D and Software departments on new product designs, testing, and validations.
- Design custom implants and disposable surgical instruments with CAD tools.
- Manage multiple projects through concept, development, validation, and implementation.
- Developed and introduced a software suite that reduced design times by 40% and increased quality by 50%.
- Audited a CAD Engineering product line and developed methods to decrease design time by 50% and increase quality by 75% over a three month period.
Candidate Info
years in workforce
years at this job
Architecture
CAD Engineer
- Obtained survey details for new and existing site for the proposed antenna installation layout.
- Produced presentation of drawing requirements of the proposed instrumentation and as built of Structural and Electrical working drawings.
- Attended and successfully completed training classes and seminars conducted by the company.
- Created and implemented additional system standards of cad telecom libraries.
Candidate Info
years in workforce
months at this job
Electrical Engineering
CAD Engineer
Created architectural, mechanical and piping drawings and details for the Facilities department and five internal business groups to support the business needs for the entire facility.
- Produced "As built" drawings at the completion of projects.
- Document Manager for the Facilities Dept.
- AutoCAD license server administrator.
- Created and maintained a data base of 3500+ Facilities Dept. paper drawings.
- Created training materials and trained Engineers in the basic use of AutoCAD software.
- Created and implemented CAD procedures for the Facilities Dept.
- Familiar with National CAD standard practices.
Candidate Info
years in workforce
years at this job
Computer Science
CAD Engineer
Perform integration testing, User Acceptance Testing and Regression Testing using QTP.
- Identifying and documenting all issues and defects to ensure application software functionality during the Regression and Functional testing.
- Developed QA Strategy, coordinated multiple test cycles to test the shipping center functionality on Windows NT.
- Logged, triaged, tracked defects, and engaged in issues resolution on a daily basis, through conference calls with off shore development team, published status reports and QA Assessment documents
- Assisted management with process analysis to define problems and appropriate solutions.
- Troubleshoot and repair diverse machines. Configuration of PLC, Master CAM tool.
- Server setup, system trouble-shooting, network administration for the business office.
Candidate Info
months in workforce
months at this job
Mechanical Engineering
Mechanical Engineering
Cad Engineer
- Provided drafting support for the engineering department
- Utilized knowledge of machines, engineering practices, building materials to complete drawings
- Developed and maintained method for filing and retrieving completed drawings for reference and technical support
- Assisted Sales and Engineering departments in translating requirements to drawings
- Maintain and develop, in requirement with the local market, product catalogs and brochures, sales literature and manuals.
Candidate Info
years in workforce
years at this job
Electronics Technology
Computer Engineering
Senior CAD Engineer
Provided support and training to custom layout teams for Cadence layout tools. Duties included
- Developed internal training materials for Cadence IC6.15 Virtuoso tools intended for layout designers. The classes have presentation materials and labs and are given in person or over Webex.
- Supported designers at worldwide locations for problems with Virtuoso-XL, VSR, VCAR and PDK setup issues reported on Jira bug reporting system.
- Over-flow support for Place and Route group. Perform P&R using Cadence Encounter tool on small blocks relieve work load on P&R group.
Candidate Info
years in workforce
years at this job
Bachelor of Science
CAD Engineer II
Created PCB schematic capture, layout, and fabrication documentation using PCAD 2002,
AutoCAD 2000, and SolidWorks for the Optical Laboratory Equipment industry.
- Designed printed circuit boards for optical power meters, laser control power sources, and optical detectors using PCAD2002 (trained on Altium Designer10).
- Designed housings for optical power meters, laser control power sources, and optical detectors using SolidWorks 2010.
- Provided Continuation Engineering support, ECOs, etc for existing products.
- Documented RoHS compliance of components and assemblies.
Candidate Info
years in workforce
years at this job
Industrial Manufacturing Technology
Facility CAD Engineer
- Responsible for updating, standardizing, and maintaining current facility layout of 500,000+ sq. ft. buildings.
- Responsible for optimizing facility layout for future 5 year plan that maximizes overall facility efficiency with best practice safety.
- Partnered with Project Managers to optimize equipment layout to facilitate ease of installation, maintenance, and operation while maximizing lean principles.
- Created detailed cell layouts and cell flow while maximizing lean principles.
- Established 5s workplace on the shop floor within individual cells.
- Coordinated with facility construction engineers on capital projects.
Candidate Info
years in workforce
years at this job
CAD Engineer, Mechanical CAD Process Development and Support
Led MCAD Library components development, developing new techniques and workarounds to address ProE bugs.
- Developed productive methodologies to convert legacy data into fully-featured and modifiable models in Pro/Engineer.
- Planned, tested and rolled out major software updates for Pro/Engineer, IDEAS and PDM tools, and collaborated with the acquisition team to integrate into the design environment.
- Led many team initiatives that improved processes and tool support, including implementing the standard, IDF-based, MCAD ECAD Data Exchange process.
Candidate Info
years in workforce
months at this job
Mechanical Engineering
Mechanical Engineering Intern/cad Engineer
Utilized reverse engineering to custom design handicap vans using Solidworks
- Created accurate models of plan layout which increased productivity
- Designed 3D models for customer use on company website
- Communicated with management and technical groups to determine final goals
Candidate Info
years in workforce
years at this job
Design
Education/skillsets
Senior Level Draftsman/cad Engineer
Developed complex header assemblies and detail drawings using current ASME standards and welding
procedures.
- Researches projects 30 years or older to find a solution for today's replacement.
- Generated bending sheets, cut sheets, welding orders, order lists, assembly drawings, detailed
- Designed 3-D renderings for customers using AutoCAD.
- Provided support to surrounding product design groups.
- Performed complex calculations to determine proper material usage, stresses and weights.
- Identified proper welding procedures for newly designed products.
- Experiences many aspects of product development, forgings, extrusions, bending, welding, fittings, tubing,
Candidate Info
years in workforce
years at this job
Mechanical Design
Contract CAD Engineer Through Hudson Highland
Created and updated mechanical drawings, electrical schematics, architectural wiring updates (AutoCAD).
- Assisted ECO Coordinator in all duties relating to managing Engineering and assumed ECO Coordinator responsibilities when necessary.
- Changes, including oversight and management of change orders (ECOs) and document revision assigned to me.
- Created 2-D and 3-D assembly illustrations for technical manuals.
- Created overlays and silkscreen drawings for marketing of new product lines.
- Assisted in BOM creation and updates.
- Updated legacy AutoCAD and Autodesk Raster documents.
- Provided AutoCAD technical assistance to Customer Service engineers.
Candidate Info
years in workforce
years at this job
Math, Applied Physics
Mechanical Engineering
CAD Engineer/ Project Engineer
Managed Solidworks(TM) part redesign, conversion and maintenance
- Managed Projects, including technical support, and troubleshooting, and finance related issues
- Negotiated contracts with three new suppliers
- Used Creo to produce parts that were 3D printable, and fix 3D designs
- Developed costing for 10 new product lines and supported new technology development
- Managed production of 3 different prototypes of new products
- Managed projects involving many different manufacturing processes including: injection molding,
Candidate Info
year in workforce
months at this job
Mechanical Engineering
CAD Engineer
Updated drawings and standards based on engineering changes & process changes.
- Participated in design reviews.
- Created and performed Engineering Change Notice (ECN).
- Created CAD, DWGs, Bill Of Material (BOMs) and Work Instructions (WI).
Candidate Info
years in workforce
months at this job
Mechanical Engineering
CAD Engineer
Develop 2D drawings in AutoCAD for business properties
- Developed existing and proposed Fiber conduits and Pedestals
- Streets, Right of Ways, Public Utilities and Hand-holes
- Managed all bases and convert into PDFs for all CAD documents.
- Update all projects and submit to project manager for proposal
Candidate Info
months in workforce
months at this job
Mechanical Engineering
CAD Engineer
Develop 2D drawings in AutoCAD for business properties
- Developed existing and proposed Fiber conduits and Pedestals
- Streets, Right of Ways, Public Utilities and Hand-holes
- Managed all bases and convert into PDFs for all CAD documents.
- Update all projects and submit to project manager for proposal
Candidate Info
years in workforce
years at this job
Certificate
Certificate
It & Autocad
CAD Manager & CAD Engineer
- Created, managed, coordinated and delivered all mechanical, electrical, public health & fire protection
- Planned projects from inception to completion and set time/financial inputs for all CAD work
- Implemented and developed company CAD standards
- Recruited, managed and developed the skills of in-house and external CAD team members
- Motivated senior CAD staff and mentored junior CAD team members
- Liaised with Clients, Architects, Q.S., Structural & M&E Engineers, Contractors, Manufacturers, Company
- Purchased software/hardware and acted as first point of contact for I.T. / CAD related issues
- Worked per project requirements whether on-
Candidate Info
months in workforce
months at this job
Deans List
CAD Engineer
- Designed Printed Circuit Boards to meet the clients specifications and requirements.
- Provided assistance to the Tooling Dept. regarding the Final Inspections of the PCBs.
- Built and maintained databases of all designs for Sales Engineers & other internal users.
Candidate Info
year in workforce
year at this job
Manufacturing Engineering
Computer Science
CAD Engineer
- Prepared shop drawings using AutoCAD and MicroStation.
- Updated, filed and retrieved both hard and soft copies of drawings in accordance with the standards set by the department.
- Ensured timely and accurate submission and completion of all drawings.
Candidate Info
years in workforce
months at this job
Mechanical Engineering
CAD Engineer, Adjustable Height and Width Walker
- Conceptualized and invented an adjustable height and width walker to provide aid for overweight and obese people.
- Developed, planned and produced a comprehensive 3D computer model prototype for which material selection and finite element analysis (FEA) could be performed risk free.
- Analyzed, critiqued and evaluated the feasibility and cost effectiveness for public purchase.
Candidate Info
years in workforce
year at this job
Computer Drafting & Design
CAD Engineer
- Updated necessary plumbing changes to keep current for production
- Sketched and designed models for future projects
- Created books with current drawings for production line
Candidate Info
years in workforce
months at this job
Network System Administration
Pv Design And Installation
Computer Aided-drafting Technology
CAD Engineer
- Designed photovoltaic system per SES standards for residential and commercial projects
- Produced solar photovoltaic permit packages for residential and commercial projects per city and county requirements
- Operated PC with AutoCAD 2010, Google Earth
- Managed drafting department and standards
Candidate Info
years in workforce
years at this job
Architectural Engineering
CAD Engineer
- Ensured that plans met current IRC, IECC and IBC building codes
- Created conceptual 2D and 3D presentations that allowed clients to make informed decisions about design issues
- Timely and accurate completion of drawings for a wide variety of custom homes
- Worked as part of a team to update and advance office drafting practices by incorporating ideas gained from attending several A.U. conferences and training sessions
Candidate Info
years in workforce
years at this job
Chemistry
Chief CAD Engineer, Technician
Initiated company's growth from a small shop to a formidable architectural metal business.
- Computerized and networked the office environment to replace a "paper and pen" system.
- Greatly improved productivity and customer base with implementation of Solidworks 3D CAD
- Translation of solid 3D models into G-code using MasterCAM software.
- Recommended architectural improvements, design solutions and integration solutions.
- Responsible for all the shop drawings, cut lists, material orders and management of production and personnel.
- Assignment of tasks to staff including training new employees.
Candidate Info
year in workforce
year at this job
Mechanical Engineering Technologies
Architectural Design Technologies
CAD Engineer/draftsman
- Handled customer orders to draw products to specifications including both greenhouse layouts, and petroleum gas storage tanks to meet UL-142 standards.
- Created Excel worksheets to calculate wetted surface areas to provide more accurate measurements on UL standards and to comply with fire safety codes.
- Incorporated updated formats of drawings to improve customer and distributor relations. Decreased
- Worked on blueprints and layouts for greenhouses for various institutional campuses including East
- Reformatted system of out of date drawings to improve company-customer relations.
- Created up to date blueprints of shop floors to demonstrate layouts and arrangements of machines and their maintenance logs.
Candidate Info
years in workforce
years at this job
Manufacturing Engineering Technology
Technology Option
Sr. CAD Engineer
Directly supervised 3 personnel. Responsible for managing the daily work of the CAD team. Lead the team in customer
service and quality initiatives. CAD representative on new product launches.
- Lead CAD team in the creation of company CAD standards, procedures and work instructions.
- Supported North American automotive and medical facilities as a CAD and engineering documentation resource.
- Worked to develop facility layouts in order to implement lean manufacturing systems in four plants across United
- Trained Engineers in the use of AutoCAD and SolidWorks software.
Candidate Info
years in workforce
months at this job
Electronic Engineering Technology
Finance
Cad Engineer / Project Manager
- Designed Three-Dimensional Models of Industrial Modular Conveyor Systems.
- Created Dimensioned & Annotated Shop Drawings for ALL Assemblies, Sub-Assemblies
- Created and Edited the Bill of Material for each project
- Assigned Parts Lists to: Saw Department, Water Jet Department Laser Cutting and the
- Obtained Quotes from: Metal, Plastic, Bearing, Fastener and Outsourced Fabrication
- Issued Purchase Orders for all purchased components and services.
- Maintained a List of Suppliers and Service Providers for each project for wearable components for future Maintenance and Sales.
Candidate Info
years in workforce
years at this job
Cad Engineer Manager
Responsible for leading a 5 member CAD team
- Managed departmental thru-put
- Maintained a set of engineering standards
- Maximized Departmental efficiency
- Reviewed all designs upon completion for accuracy in build ability and pricing
- Point of contact for sales staff with design / build ability questions
- Assisted IT in programming / maintaining engineering systems
Candidate Info
years in workforce
years at this job
Architecture
CAD Engineer
- Responsible for training engineering students on the use of AutoCAD for drafting and architectural drawings.
- Responsible for conducting seminars, counseling students as well as coordinating and marketing training courses.
- Provided Computer Aided Design (CAD) work which mainly included drafting and producing 3D models with lighting effects and rendering.
- Extensively used AutoCAD 2000, 2002 and Architectural Desktop 3.0.
Candidate Info
years in workforce
months at this job
Mechanical Engineering
CAD Engineer
- Utilized Rhinoceros 5 CAD to design exhaust components and tooling for automotive and aircraft applications.
- Interpreted engineering drawings from external companies to ensure accurate manufacturing and assembly.
- Created documentation for purchase orders based upon requested part numbers/revisions from clients.
- Machined custom parts and tooling via a manual lathe and Shop Sabre CNC plasma table.
Candidate Info
years in workforce
years at this job
Mechanical Engineering Technology
CAD Engineer
[company name]., a privately held medical device company utilizes imaging technology to create
personalized, patient-specific knee implants and instrumentation.
- Generate 3D models from diagnostic CT images and use commercial and proprietary research
- Work independently and in teams to achieve departmental and personal goals.
- Work with all departments to facilitate and implement new engineering changes, and facilitate
- Responsible for designing the iTotal tibial implants of the patient-specific by using surface models
- Run the biweekly SegSurf quality meeting, to reduce the team design time.
- Perform tasks under the company FDA and ISO-conforming quality system.
Candidate Info
years in workforce
year at this job
High School Diploma
Cad/robotics/computer Science/math
English/computer Science
CAD Engineer/cnc Programmer
Model and detail Storage Tanks in AutoCAD and Inventor for the Oil and Gas Industry.
- Output NC Code for Plasma Cutting Tables i.e. Burny 10 and Messer Tables.
- Import models and analyze new designs in Ansys.
- Optimize Nesting procedures for plate optimization.
- Ensure proper dimensions and strict adherence to API standards.
- Program ABB Robot using RobotStudio for complex welding procedures.
- Translate point cloud data into 3D for GD&T field repairs.
Candidate Info
years in workforce
years at this job
Design Engineering Technology
Mechanical Engineering Technology
Mechanical CAD Engineer
Sheet metal and tubing design for residential and light commercial heating and cooling systems.
- Provide design support for new product development on 95% energy efficient furnaces with per new EPA standards.
- Implement smart number system for manufactured and purchased parts that are to be used in final product assembly.
- Responsible for CAD analysis and failure reports in product testing; provide FE analysis results for engineering failure study.
- Involved with continuous quality improvement and sustaining projects to optimize the design of existing unit assemblies in Pro/engineer for use on the assembly line.
- Develop new manifold assemblies for cooling units switching from copper to aluminum tubing.
- Responsible for developing a company standard outlining guidelines for tubing design with respect to manufacturing capabilities and serviceability.
- Manage sustaining projects in consolidation of suction tube routing coordinating with vibration testing engineers to develop tubing with shorter cut length and copper weight ongoing to save on material cost.
Candidate Info
years in workforce
years at this job
(2012)
Mechanical Engineering
Training (eit)
Cad Engineer
- Draw and fully detail architectural layout of twelve new stores a year using AutoCAD 2008.
- Visit new store sites and take measurements to prepare As-Built drawing sets in AutoCAD 2008.
- Prepare drawing sets in AutoCAD 2008 for contractor bidding.
- Responsible for modifying existing store drawings quarterly to accurately represent store’s active merchandise layout.
- Inspect construction progress, monitor and communicate with construction contractors to provide clarification on issues pertaining to the drawing sets.
Candidate Info
years in workforce
months at this job
Civil Engineering
CAD Engineer
Develop geometric design from the survey results using InRoads suite, AutoCAD, Civil CAD and Micro Station
- Prepared detail drawing of bridge and culverts
- Cheeked the cross-sectional elements such as carriage way, widening, super elevation and ditch slope
- Generated contour, plan and profile from Global maps
- Make any necessary changes to the design drawings as per the site conditions
- Check ERA standard drawings
- Responsible for the preparation and final completion of all quantities
Cad Engineer Resume Success Stories
