- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Rig Electrician Resume Samples
No results found
Candidate Info
years in workforce
years at this job
Electronics Engineering Coursework
RIG Electrician
Provided preventive maintenance and repairs of automated oilfield equipment on oil production rig offshore.
- Troubleshoot pumps, compressors, generators, process equipment, and three stages of separator control (oil/water/salt).
- Oversee power generation, distribution and control (20kv, 5.5kv and 380V panel).
- Conduct maintenance of automation PC systems and control I/O Servers, PLC's.
- Monitored and implemented safety procedures (JSA, STOP cards, Lock-out, Tag-out, etc).
- Update all P & ID drawing to conform to actual site equipment for control and safety systems.
- Scheduled maintenance of solar turbo generator and setting up EMS targets to improve environmental expectations.
Candidate Info
years in workforce
years at this job
Electrical Systems
Journeyman Electrician
Offshore Rig Electrician
Maintains offshore rig electrical systems including SCRs, PLCs and generator controls; maintains turbine AC & DC motors and motor controllers.
- Services other systems to include CCTV, Top Drives, lighting, […] 24-600 V DC; utilizes blueprints, schematics and P&IDs in carrying out maintenance/installation.
- Makes maintenance planning recommendations and estimates to leadership, including short- and long-term planning of system overhauls and preventive maintenance actions.
- Evaluated each facet of electrical maintenance support services and provided recommendations for improvements in procedures, products and equipment.
Candidate Info
years in workforce
years at this job
Electrician
Nuclear Electrician
Rig Electrician
Currently the Rig Electrician on a new build, JU3000N in Argentina.
- Performed major electrical repairs on ABB VFD Drives and F&G(Vacon) Jacking Systems
- Perform maintenance and repairs onboard.
- Supervised and became involved in the building process of the rig in Singapore.
Candidate Info
years in workforce
years at this job
Rig Electrician / Cost Estimator
Connected and terminated start/stop controls, high voltage motors and switch gear buckets located in the motor control center.
- Ran Conduit, Cable tray, and pulled Marine cable as wiring methods required for specialized equipment.
- Formed extensive blueprints containing detailed diagrams for rig assembly
- Formulated Microsoft excel spreadsheets as RFQ's for vendor pricing
- Formulated material take offs, and bid proposals for large projects in excess of […] dollars for major oil drilling companies like Nabors Drilling, National Oilwell Varco, and British Petroleum
Candidate Info
years in workforce
years at this job
Rig Electrician
Troubleshoot, repair, maintain and install all electrical systems on rigs
- Serviced and installed National, Varco and Lewco top drives, draw works and mud pumps
- Assisted Rig Mechanic on mechanical systems involving hydraulics, iron roughnecks, bull gears and pump rebuilds
- Serviced PCM 120, SCR Crane and AC Drive Crane
- Installed and maintained SCR's and VFD houses
Candidate Info
years in workforce
years at this job
Industrial And Commercial Wiring, And Txmrs
Rig Electrician
Successfully complete all jobs by time requested
- Coordinate delivery of large projects with all field personnel and parties involved
- On call for multiple weeks at a time, maintain and operate all equipment as well as rig moves(preventative maintenance)
- No OSHA violations in the 3 years employed through H&P
- Terminate, troubleshoot pressure switches, solenoids, hydraulics, PLCs, input, output cards, encodes, can operate a scope meter, send signal during trouble shooting
- All electrical repairs, starters, contactors, motors, overloads, Allen Bradley, G&E, Omron
- Beginning pay, $22.50, ending pay, $26.75
Candidate Info
years in workforce
years at this job
Rig Electrician
Job Description Operation Technician for M1-Complex
- Ensure strict compliance operating envelopes, procedures and standing instruction in order to safeguard HSSE performance and plant availability and reliability.
- To receive and adhere to daily operating instructions from Work Supervisor and feedback immediately if compliance a problem for any reason.
- In the event of plant or equipment tripping, to provide/assist in immediate frontline troubleshooting and remedial action for recovery.
- Ensure disciplined recording of relevant operation logbooks, and for highlighting corrective actions as appropriate.
- Ensure Operating procedures and standing instructions are updated to operate the facilities in accordance.
Candidate Info
years in workforce
years at this job
Rig Electrician
Install, repair, alter, and maintain electrical conductors, fittings, devices, and fixtures for heating, lighting, or power purposes.
- Comply with the current edition of the National Electric Code as well as NFPA. Work with low, medium and high voltage equipment.
- Maintain wildcat drilling rigs during all phases of operation.
- SCR technician, proficient in Ross Hill, Tech Power, IPS, GE drive systems.
- Works with the installation, maintenance, and repair of wiring systems and other electrical fixtures and electric or electronic equipment.
- Performs difficult or routine installations and repairs of motors and generators, replaces brushes, bearings, and makes connections and terminations.
- Maintain all rig electronics and electrical devices.
Candidate Info
years in workforce
years at this job
Associate of Science
Rig Electrician
Team Lead/Testing and QC Team
- Wiring and testing of drilling rigs while on Rig Up yard for Nabors USA
- Sizing cables for motors, preparing routing to termination points, Ensuring professionalism of terminations and routing of cables, Planning daily work for crew under the supervision of immediate supervisor who directed and communicated the specified jobs of importance
- Manage a crew of 5-8 men and ensuring work would be completed by end of day
- Keeping Daily logs of material used and parts needed
- Communicating with Customer daily of production and ETA for Rig completions
- monitoring of safe work practices and enforcements
- Monitoring standards for cable routing and instrument mounting as per customer request
Candidate Info
years in workforce
years at this job
Drilling Rig Electrician
Troubleshoot and repair Drilling Rig: Generators, generator load distribution systems, power distribution, motor starters, motor soft starters, motors, Programmable Logic Controllers, Electronic and Electrical on Top Drive Units, lighting circuits, electronic circuits on Caterpillar engines, air condition units, and Electronic systems controlling hydraulics and pneumatics.
- Make sure that all Electrical Safety Protocols are being followed, including Lock Out Tag Out, while working on Electrical Equipment.
- Install and wire in New and upgraded electrical equipment following prints and schematics.
- Conduct daily, monthly, and quarterly Electrical Inspections on all area drilling rigs to OSHA standards, prepare reports with supporting pictures of discrepancies. Respond to immediate electrical hazards, exercise Stop Work when necessary, and notify the appropriate personnel of existing hazards. Prepare parts list, order parts, and repair equipment discrepancies.
- Respond to emergency service calls, reducing rig down time, and reducing 3rd party expenditures.
Candidate Info
years in workforce
years at this job
Electrical Mechanical Engineering
Rig Electrician Supervisor
Ensure that all electrical related equipment and systems operate in a safe and efficient
- manner, maintaining a written log of maintenance performed.
- Supervise the rig electricians and Maintain effective working relationships with field crews.
- Ensure compliance with safety requirements and standards procedures.
- Eliminate all electrical hazards as they are identified.
- Participate in all critical operations such as rig moves and fire drills.
Candidate Info
years in workforce
years at this job
Electrician - Industrial & Commercial Electrical Maintenance And Contstructiom
Certificate
Heating Ventilation & Air Conditioning
Rig Electrician
- Assist in Rig-Up/Rig-Down during relocation of drilling rigs.
- Variable Frequency Driven Motor Control Technician
- Programmable Logic Controller System Isolation Fault troubleshooting and repair.
- Testing, troubleshooting, installation removal and repair of all electrical, electro-mechanical, electro-hydraulic and solid state electronic systems, associated components and all ancillary equipment including Variable Frequency and Programmable Logic Controlled equipment on drilling rigs.
- Installation, troubleshooting and repair of motor control system and sub-system components, hardware, wiring and all associated monitoring instrumentation, and ancillary equipment .
- Maintain and troubleshoot and repair all onsite communication systems.
Candidate Info
years in workforce
years at this job
Industrial Electronics Technology
Computer Information Systems
Land Rig Electrician
- Electrician supervisor overseeing the construction of new rigs
- Responsible for ordering and installing parts
- Tested all electronics on new rigs
- Supervised contracted electricians
- Maintained and repaired rigs in Texas
- Worked with electricians
- Installed new equipment
Candidate Info
years in workforce
year at this job
Industrial
Industrial Rig Electrician
Preparing and updating material list for construction of drilling rigs
- Designing and installing control circuits for drilling platforms
- Reading and following schematics while planning and constructing rigs
- Perform installation of all electrical equipment on mud pumps, mud pit, tool and parts trailer, derrick, cellar, B.O.P, accumulator, and drill cab.
- Ensuring that all work passes inspection and API standards are followed
- Traveling regularly within the state and across country to perform maintenance and upkeep of active drill sites
- Completing all task while meeting strict dead lines
- Working with other electricians and hydraulic techs in order to build multiple rigs within the year
- Fork lift and sky trak experience Experienced in multiple 120, 240, 277, and 480 volt devices and equipment
- Skilled in motor control design, installation, and repair
- Able to assess and repair damage to any hydraulic electric equipment on rig
Candidate Info
years in workforce
years at this job
Rig Electrician
- Work on all AC/DC power equipment
- Work on preventive maintenance on all AC/DC power equipment
- Troubleshoot and repair electrical problems.
- Troubleshoot and repair HVAC system.
- Check spare parts on equipment and order parts when needed.
Candidate Info
years in workforce
years at this job
High School Diploma
Rig Electrician
- General maintenance and preventive maintenance of oil rig electrical systems.
- Repair of electrical system as required, ensuring equipment power requirements.
- Maintenance of electrical switchgear, board centers, and communication equipment.
- Performed system upgrades as required.
- Training: Stuck Pipe School
- Life Support Equipment Training
- BOP and Insulator Classes
Candidate Info
years in workforce
years at this job
Rig Electrician and Mechanic Providing
on-site services performing installation, repair and maintenance services.
- Ensures equipment is functioning properly and efficiently.
- Troubleshoot and repair every electrical & mechanical issue that can happen on a drilling rig.
- Work with IPS, IEC, Ross Hill, Ross Hill "Clones", and Baylor Thyrig
- Construction services for land-based and off-shore drilling rigs and rig components.
- Installing and commissioning of rig components
- Swapped out hydraulic hoses and build hydraulic hoses for the rebuilds.
- Installs service loops, grounding, start ups, drag chains and full installations of commutation system.
Candidate Info
years in workforce
years at this job
Electrical / Electronics Engineering
Rig Electrician
Working In The Silicon Control Room SCR
- Connection Of Draw Work
- Repairing And Connections Of Shale Shaker
- Repairing And Connection Mud Pumps
- Repairing And Connection AC and DC
- Installation And Connection Of Agitators
- Lining Of Generators
- General Connection And Disconnection During Rigging Up Or Down
- General Connection In Mud Tank Areas
Rig Electrician Resume Success Stories
