- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Bridge Engineer Resume Samples
Filter:
No results found
Candidate Info
22
years in workforce
7
years at this job
BS
Civil Engineering
MA
Structural Engineering
MA
Structural Engineering
Senior Structural / Bridge Engineer
Designed the Yuan River Bridge (a long span box girder cable-stayed bridge) in Tianjing, China.
- Analyzed the structure of the track dynamic laboratory for CARS. This lab is one of the largest and most multi-functioned track dynamic lab in the world.
- Accomplished the rehabilitating design of the bridges in Hebei, China.
- Designed the Hailar highway bridge and consulted the construction of this bridge.
- Managed and inspected the construction of two very large bridges spanning the Yangtze River (a steel suspension bridge with a 900 m main span) and Yellow river (a steel truss bridge) as the lead engineer.
- Completed the study of 'The Theoretical and Experimental Research of Structures for Very Long Span Steel Railway Suspension and Cable-stayed Bridges'.
- Programmed the nonlinear finite element software for analysis of cable-stayed and suspension bridges.
- Managed and inspected the construction of the several highway bridges from Guangzhou to Shenzhen in China as a consulting engineer.
Candidate Info
1
year in workforce
1
year at this job
BS
Civil Engineering
MS
Civil Engineering
Bridge Engineer
Designed bridges that range in the 10 to 600 million dollars. Responsibilities include proposing new bridges, verifying fabricator's drawings, and performing BOQ/BOM calculations.
- Analyzed and designed cross frames for curved girder bridges
- Inspected a commercial building for structural integrity where the foundation was next to a bridge's abutment
- Involved with site investigations to collect data for inventory and bridge load rating
- Promoted from an intern to bridge engineer
Candidate Info
1
year in workforce
1
year at this job
BS
Civil Engineering
MS
Civil Engineering
Bridge Engineer
Designed bridges that range in the 10 to 600 million dollars. Responsibilities include proposing new bridges, verifying fabricator's drawings, and performing BOQ/BOM calculations.
- Analyzed and designed cross frames for curved girder bridges
- Inspected a commercial building for structural integrity where the foundation was next to a bridge's abutment
- Involved with site investigations to collect data for inventory and bridge load rating
- Promoted from an intern to bridge engineer
Candidate Info
14
years in workforce
1
year at this job
BS
Civil Engineering
MA
Structural Engineering
MA
Structural Engineering
Bridge Engineer
Responsibilities: Bridge design and analysis, bridge seismic analysis and evaluation, bridge rehabilitation and retrofit design.
- Completed seismic analysis, evaluation and retrofit design of Castleton-on-Hudson Bridge in NY and NJ.
- Designed closure strip of Moses Wheeler Bridge and accomplished seismic analysis of this bridge in CT.
- Completed retrofit design of Rout 139 Viaduct in NJ.
- Designed the inspection platform for Bridge over Mississippi River on I-40.
Candidate Info
5
years in workforce
3
years at this job
BS
Civil Engineering
Bridge Engineer
- Designed bridges and other highway related structures using PennDOT standards, and AASHTO policies and procedures.
- Provided engineering supervision to technicians and CADD draftsman in daily work activities associated with project and employee development.
- Reviewed soil reconnaissance, preliminary TS&L design studies, hydrology & hydraulic reports, geotechnical reports, foundation reports, PS&E packages, and QA/QC forms prepared by consulting engineers.
- Reviewed fabricator shop drawings for compliance with design drawings.
- Assisted in the development of bridge maintenance repair contracts.
Candidate Info
4
years in workforce
3
years at this job
Civil Engineering
Civil Engineering
Structural/ Bridge Engineer
Designed and quantified structural underpasses and foundation with and without the aid of software.
- Reviewed geotechnical reports and project drawings/specifications to ensure correct construction quality.
- Supervised major bridges under construction and checked material testing procedures.
- Prepared structural and geotechnical reports on rehabilitation of drainage structures.
Candidate Info
4
years in workforce
2
years at this job
BS
Structural Engineering
Assistant Bridge Engineer
- Clearly documented and performed plan set development, structural analysis, design and constructability review of concrete structures using hand calculations, computer modeling, and appropriate design codes.
- Developed scope and fee, contracts, and schedule for small projects less than $25,000 in design cost.
- Provided technical design support during construction by approving and responding to all contractor correspondence, shop drawings, submittals, and request for information (RFI).
- Used Highway Bridge Replacement and Rehabilitation Program (HBRRP) Manual to research the funding allocation for design and construction
Candidate Info
3
years in workforce
1
year at this job
BS
Civil Engineering
MA
Engineering Management
Bridge Engineer
Interstate 95 at Norwalk Bridges Type Study - Responsible for preparation of type study report
- Interstate 84 and Route 8 Interchange Reconstruction - Responsible of helping with existing and new structure layout and cost estimation of each alternative.
- Pearl Harbor Memorial Bridge - Responsible for checking of superstructure as well as substructure calculations. Also assisted in the work needed to meet addendum deadlines.
- Columbus Blvd. Bridge over SR 598 - Responsible for design of structure mounted sign and preparation of construction plans.
- I-215; 4700 South to 3500 South - Responsible for checking calculations for bridge expansion including hand calculations, computer generated output, and construction plans. Also checked calculations for overhead sign structure.
Candidate Info
5
years in workforce
5
years at this job
AAS
Computer Applications Management
Operations Support Specialist/telecom Technician/certified Bridge Engineer
- Provided technical support/maintenance to Reston, Cambridge/Bedford, MA, and Chanhassen, MN audio conferencing call centers.
- Provided support to the WYSE 60 terminals which were later replaced by Citrix machines and PCs to support the bridges.
- Ensured connectivity between call coordinators and bridges; installed, configured, and maintained bridges; created reports generated from Call Data Records and Harris 20/20 Switches (LX/IXP).
- Created and documented bridge and telecom software and hardware use and procedures.
- Assisted and supported upgrades from Windows 98 systems to NT4.0 to Windows 2000.
- Was instrumental in network redesign.
Candidate Info
5
years in workforce
4
years at this job
BS
Civil Engineering
Bridge Engineer
Conducted bridge inspection of multiple span steel beam and bascule bridges.
- Lead construction inspection of pre-stressed concrete box beam bridges and multiple span steel beam bridges.
- Lead construction inspection of Airport Resurfacing.
- Conducted structural analysis of multiple span steel girder bridge - Main Ave. Bridge in Cleveland, Ohio.
- Performed shop drawings for review with the ODOT Bridge Review Program. Completed substructure design of various bridges.
Candidate Info
38
years in workforce
4
years at this job
Bridge Engineer
Provide administration for [company name] bridge, establishing connections worldwide using DVS or across IP connections.
- Execute matrix reporting used to brief leadership, organizing schedule to determine staff attendance requirements.
- Maintain 98% success rate on all connections in and out of theater across multiple domains.
- Conduct training for new incoming units on video and audio equipment use.
- Led the revision and approval of office standard operating procedure and request forms.
- Install operate and maintain video conferencing equipment to facilitate client events.
- Use COMSEC materials and procedures to maintain functionality and security of [company name] systems during events.
- Monitor the status of scheduled and ad hoc conferencing bridged events to ensure availability and quality of service.
Candidate Info
1
year in workforce
1
year at this job
BS
Architectural Engineering
Bridge Engineer, E.i.t
Designed highway bridges and overpasses for Texas Department of Transportation
- Designed concrete portions of the bridges using a variety of design and analysis tools
- Performed site assessments of multiple bridges throughout SE Texas, performed analysis, and made recommendations to the State regarding repairs or replacements that may be needed
- Created construction documents using Microstation. Administered QA/QC of drawings
Candidate Info
20
years in workforce
1
year at this job
BS
Civil Engineering
MS
Structural Engineering
Bridge Engineer
- Designed a pedestrian bridge and provided construction support for the project.
- Carried out condition inspection of several railway bridges and prepared structural assessment reports.
- Prepared strengthening design of railway bridges.
Candidate Info
13
years in workforce
8
years at this job
BS
Civil Engineering
MS
Structural Engineering
Bridge Engineer
- Prepared details and layout drawings and sketches using Microstation.
- Performed structural analysis and design, including seismic analysis, of bridge substructures and superstructures of steel, pre-stressed and concrete structures utilizing computer programs and manual computations in compliance with accepted bridge design practice and design specifications and guidelines.
- Prepared and submitted preliminary plans to railroad company for clearance approval.
- Performed calculations for quantity takeoff of concrete, structural steel for use in cost estimates.
- Inspected existing bridges, determined the need for repairs and maintenance, and recommended necessary work.
- Checked shop drawings provided by fabricators.
- Checked plan drawings and details drafted by CAD technicians.
- Checked bridge design calculations for other engineers.
- Performed additional duties as requested. Assignments were completed as requested and all deadlines were met.
- Oversaw all of the bridge aspects of projects designed by consultants, assuring the design’s compliance with the AASHTO LRFD bridge manuals, Kentucky Guidance Manual and design policy and Standard Specifications for Road and Bridge Construction.
Candidate Info
2
years in workforce
2
years at this job
HS
High School Diploma
C
Truck Driver
Bridge Engineer
- Specialized in road and highway design, reinforced concrete structure design, foundation engineering, and advanced underground structures
- Utilized mechanical skill to repair and maintain Maintenance of Way equipment
- Operated / repaired various types of excavating, demolition and construction equipment: scrapers/spreads, backhoes, loaders, bulldozers, compactors, road graders, haul trucks, forklifts, lattice friction crane, boom welding, and over-the-road trucks
- Performed all repairs -- light field maintenance / repairs to major field and/or shop overhauls
Candidate Info
22
years in workforce
3
years at this job
MS
Civil Engineering
Civil Engineering
Sr. BRIDGE ENGINEER
- PENNDOT / DESIGN-BUILD Projects, Quality Control / Lead Bridge Engineer
- Guided and coordinated the engineering team's efforts to achieve highest technical quality thoroughness of project deliverables and strived to maintain project schedules within budget.
- Implemented practical QC review and checking procedures for different steel and concrete bridge projects regarding foundation submissions, design calculations checking and final plans preparation.
- Analyzed / designed highway bridge substructures (pile / spread / caisson foundations, single-column drilled shafts, hammerhead piers, concrete abutments & wingwalls, elastomeric bearings) and superstructures (reinforced concrete deck slabs, p/s box beams and I-beams, steel plate girders).
- Supervised / mentored / trained junior engineers regarding technical aspects of bridge structural design, quality control, contract plans development and ethical aspects of general engineering work.
Candidate Info
6
years in workforce
6
years at this job
Electrical Engineering
Business Admin
Bridge Engineer Sergeant
Responsible for over 8 million dollars of ribbon float bridge equipment and the health and welfare of up to 8 soldiers. Trained to communicate effectively in a small team environment, being able to give direction and share ideas in a concise effective manner.
- Managed bridging aspects during multiple campaigns overseas
- Managed assets of over $8 Million.
- Responsible for health and welfare of up to 8 soldiers
Candidate Info
6
years in workforce
3
years at this job
BS
Civil Engineering
MA
Master of Arts
Structural Bridge Engineer I
- Performed and checked complex bridge design calculations, cost estimates, special provisions and structural analyses for design and rehabilitation projects for MassDOT and ConnDOT.
- Designed, detailed and checked proposed bridge and bridge rehabilitation plans.
- Created and manipulated design drawings and sketches in AutoCAD and Microstation.
- Reviewed shop drawings and responded to contractor RFI’s.
- Served as an inspection team member for the I-90 Tunnel (South Station) Settlement and the Fore River Bridge projects.
- Performed and prepared all aspects of field inspection, load rating and structural reports.
- Fore River Bridge • Quincy, MA • Lift Bridge Replacement • Steel Girder/Stringer • 1300’ Long • 225’ High Towers
- Beach Road over Lagoon Pond • Martha’s Vineyard • Bascule Bridge Replacement • Steel Girder/Stringer • 350’ Long
- I-84 over RT-7 • Danbury, CT • Curved Bridge Rehabilitation • Concrete Pier & Deck Deterioration • 880’ Long
- I-195 over Cole River • Swansea, MA • Bridge Design • Steel Stringer • Precast Substructure & Deck Panels • 120’ Long
Candidate Info
6
years in workforce
6
years at this job
BS
Civil Engineering
Bridge Engineer
Obtained Professional Engineering Licensing.
- Inspects in-service bridges for Virginia Department of Transportation and Federal Highway Administration.
- Works closely with Virginia Department of Transportation and the Federal Highway Administration as critical issues are found and recommend remedies to each issue.
- Load rated bridges for standard loads and special use permits using VIRTIS.
- Reads and applies architectural/structural drawings to prepare for onsite bridge inspections.
- Provides accurate, timely service and advice based on a full understanding of clients' needs.
- Employs excellent interpersonal communications skills to develop constructive and cooperative working relationships with associates and clients.
- Safely and effectively operates heavy equipment such as snoopers, bucket trucks, and manlifts.
Candidate Info
12
years in workforce
4
years at this job
BS
Civil Engineering
MA
Civil / Construction
Bridge Engineer/assistant Team Leader
- Ensured prompt discovery of any deterioration, defect or structural deficiency that could be hazardous to the traveling public.
- Maintained up-to-date inventory that recorded the condition and load capacity of all qualifying structures on Certified public roads in CT, MA and RI.
- Established and maintained the information required by the Bridge Management System.
- Determined the extent of minor deterioration and initiated routine maintenance and repair work.
- Selected rehabilitation or replacement candidates.
- NBIS for CTDOT, MassDOT & RIDOT. This project involved inspection of bridge safety of over 400 bridges and 500 sign support structures each term throughout. The bridges included Class I, Class II & Class III routine and in-depth inspections. The inspection reports also involved the tasks including public safety, traffic control patterns for highway maintenance operations and provided special access equipment.
- VDOT. This project involved analysis of bridges and load rating via Virtis. This group covered a wide range of bridge materials and geometric complexities
Candidate Info
29
years in workforce
22
years at this job
BS
Civil Engineering
MS
Structural Engineering
Bridge Engineer
Design of Prestressed Concrete Girder, Steel Plate Girder, Post-Tensioned Box Girder and Steel Box Girder Bridges.
- Design of Fully -Welded Tubular Steel Truss.
- Seismic Modeling of Bridges of Intermediate and High Complexity.
- Load Rating of Concrete, Steel and Truss Bridges.
- Rehabilitation of Steel Truss, Floating and Bascule Bridges.
- Design of Retaining Wall Structures and Water Detention Structures.
- Proficient with both the AASHTO LRFD Bridge Design Specification and the ASSHTO Guide Specification for the Seismic Design of Bridges.
- Proficient with MDX, SAP 2000, GTStrudl, PGSuper, MerlinDash, CONBOX and other bridge design related software.
- Served as Lead Designer on major projects and in the mentoring of new hires.
- Served as WSDOT Retaining Wall Specialist.
Candidate Info
11
years in workforce
2
years at this job
BE
Civil And Environmental Engineering
Bridge Engineer Intern - Mahoning County Engineer (mce)
Assist in survey operations.
- Perform bridge load rating calculations and bridge inspections.
- Inspect several different jobs, such as box culvert placement, paving, road reconstruction, etc.
- Designed a project of guardrail improvements in eight different locations.
Candidate Info
2
years in workforce
10
months at this job
BS
Civil Engineering With Emphasis
Student Steel Bridge Engineer - ASCE Student Chapter
- Prepared a steel bridge beginning September via team effort.
- Bridge was tested under load. Weight and deflection were measured.
- Assisted team with fabrication of steel as well as sizing the steel using AISC Steel database for optimal load carrying capacity as well as economic efficiency.
- Ran over 4000 iterations of many different structure designs for the bridge using SAP2000 until the most optimal design was found.
- Voluntarily put time into steel bridge design on top of full time academic schedule to assist team with completion of bridge for the competitions.
- Our team won 1st place overall from a field of 47 competing schools.
- Our team won 2nd place overall from a field of 10 competing schools.
- Our team won 2nd place overall from a field of 5 competing schools.
Candidate Info
14
years in workforce
14
years at this job
Bridge Engineer/ Corrections Specialist
Maintained custody care and control of detainees in a facility while enforcing the rules, regulations, policies and procedures set forth by my superiors.
- Constantly monitored detainee movement inside and outside detention facility.
- Primary instructor for various non-lethal weapons training certification courses such as OC Spray and Tasers.
- Prepared Military units for deployment training to both overseas and stateside missions.
Candidate Info
8
years in workforce
8
years at this job
BS
Civil Engineering
Field Engineer, Bridge Engineer, Programmer
- Served as a field engineer for a coalbed methane gas collection system in Buchanan County, Virginia. Specific duties included the approval and sealing of design drawings, specifying and purchasing of small bore fittings and valves, monitoring of installed quantities, and inventory control. Also responsible for developing and monitoring of a safety program for construction inspectors.
- Bridge Inspector's Training Manual 90 - Co-author of the Bridge Inspector's Training Manual 90 and two Comprehensive Bridge Inspector Training Courses for the Federal Highway Administration. This project included updating and revising the Bridge Inspector's Training Manual 70 and producing a new Manual 90; development of Instructor's Guides and Participant's Notebooks for a one week basic course on bridge engineering and inspection and a two week in-depth course on bridge inspection.
- Pennsylvania Department of Transportation Bridge Inspector Training Course - Served as an instructor in the presentation of a 75 hour basic course and a 20 hour refresher course in bridge inspection. More than 400 hours have been logged leading the classroom instruction.
- Federal Highway Administration Bridge Inspection Program - Served as an instructor in the pilot presentations of the Federal Highway Administration's "Comprehensive Bridge Safety Inspection Program", Part II, to the Florida Department of Transportation. These presentations were for the approval of instructors by the FHWA as well as teaching bridge inspection to Florida DOT employees. While all 15 of the instructors were approved by the FHWA, I was one of only three to be approved as a course director.
- BRADD 2.0, Pennsylvania Department of Transportation - Member of the programming team that developed the Bridge Automated Design and Drafting system (BRADD 2.0) for the Pennsylvania Department of Transportation.
- NBIS Bridge Inspections, Pennsylvania Department of Transportation Districts 9-0 and 10-0 - Worked on the computerized analysis of nearly 1,200 bridges in nine counties of central and western Pennsylvania. Performed hand analysis of those structures where the computer analysis was not likely to yield representative results. These structure types included closed spandrel concrete and stone arches, open spandrel arches, and culverts.
Candidate Info
4
years in workforce
3
years at this job
BS
Civil Engineering
MS
Structural Engineering
Bridge Engineer
- Perform design calculation and prepare CAD drawings for preliminary and final design.
- Using CSiBridge and AASHTOWare for bridge design and load rating projects
- Using STAAD for highway sign structure, luminaires and CCTV pole design
Candidate Info
12
years in workforce
3
years at this job
BS
Civil Engineering
Structural Design Engineer/bridge Engineer
Assisted in the design of highway structures including DMS walkways.
- Assisted in the deck rehabilitation design of I-80 Bridge.
- Assisted in the design of structural supports for Intelligent Transportation System Dept. on all types of sign support structures including Cantilever, Butterfly, and Overhead; Port Authority owned tunnels/ Bridges as well as NJDOT owned bridges.
- Team member of bridge structural inspection team, responsibilities include: preparation of Reports and CADD drawings for member identification, deck cross section, clearances, soundings, etc.
Candidate Info
10
years in workforce
1
year at this job
HS
High School Diploma
BA
Human Resources
Bridge Engineer
Provide supervision, guidance and accountability of junior enlisted soldiers.
- Preparing, assembling, and disassembling complex military bridges.
- Processing paperwork in accordance with army regulations.
- Communicating needs and setting requirements in order to accomplish tasks at hand.
Candidate Info
6
years in workforce
2
years at this job
BS
Civil Engineering
MS
Civil Engineering
Bridge Engineer
- Analysis and design of shallow and deep foundations.
- Structural analysis and design of concrete and steel structures.
- Design and analysis of steel connections.
- Design of Precast and Prestressed Concrete Components.
- Participated in reviewing and checking designs, drawings, and data by other engineers.
- Assisted in planning, design, and preparation of preliminary and final engineering plans.
- Assisted in Quantity take-off, preparing Bill of Quantities and Cost Estimates.
Candidate Info
4
years in workforce
4
years at this job
Junior Bridge Engineer
Assistant Bridge Engineer
- Assisted Bridge Engineer in preparation of construction plans.
- Assisted in calculations of structure.
- Utilized Microstation to prepare contract plans.
Candidate Info
3
years in workforce
6
months at this job
BS
Civil Engineering
MA
Civil Engineering
Intern (bridge Engineer)
- Evaluate bridge inventory and operating ratings and do necessary calculations.
- Prepare LRFD and ASD method for the existing Timber and Steel Bridge for discussion and development by the professional team
- Provide analysis and detailed design of the bridge structure (substructure and superstructure)
Candidate Info
6
years in workforce
6
years at this job
AS
Arts
Material Sciences Graduate
Combat Bridge Engineer
Decorated Sergeant as a Headquarters Crew Chief
- Experienced interdisciplinary bridge engineer with very strong organizational skills
- Broad knowledge of vacuum systems for various electron microscopes
- TEM/ SEM experienced for over 5 years in material/biological sciences
- Skilled in biological thin sectioning of animal and plant tissue
- Material/Biological sample preparation for the SEM, TEM, and Focused Ion Beam (FIB)
- Practiced High Pressure Freezing and Freeze Substitution techniques
- Ability to maintain accurate records and generate coherent scientific reports
- Knowledge of EDS and WDS analytical collection
- Trained in wet film photography development/procedures for EM
- Light Microscopy (LM) techniques include: DIC, Phase Contrast, Dark Field, and Fluorescence
Candidate Info
5
years in workforce
7
months at this job
BS
Architectural Engineering
MS
Environmental Engineering & Management
History And Islamic Studies
Bridge Engineer
Bridge design and construction engineering services for structures in Colorado.
- Structural design (sub-, superstructure, & shoring)
- Crane specification & erection layout
- Shop drawing CAD & review
- Construction observation
Candidate Info
2
years in workforce
1
year at this job
BA
Civil Engineering
MA
Civil Engineering
Bridge Engineer
- Perform structural analysis and design using both manual computation and computer programs; prepare design
- Perform roadway design and generate geometry files for bridge hydraulic study using Inroads.
- Prepare project drawings, specifications, and estimates of probably cost.
- Program bridge load-rating analysis for a continuous span bridge using Excel and prepare rating report.
- Conduct bridge and dam inspections and prepare inspection reports.
- Perform concrete field test.
- Provide construction support service including review shop drawings, prepare sketches and mark up drawings and conduct field investigation and measurement of constructed structures under the supervision of Senior
- Research design options and discuss with project lead engineer.
- Coordination with other disciplines and teaming partners.
- Train intern.
Candidate Info
2
years in workforce
2
years at this job
PhD
Construction Engineering (structural)
Structural Engineering
Civil Engineering
Structural/bridge Engineer
- Designed different types of highway and railway bridges including cable- stayed, reinforced concrete, prestressed concrete, composite, and arch bridges both as an individual designer or working with a team
- Accomplished two major bridge projects as the main designer: Minoo Island Bridge, a 150m long cable stayed bridge (phase I & II); and Karoon IV, a 400m long bridge (phase I) with several alternatives such as steel arch, concrete arch and cable-stayed
- Developed a computer code for simulating high-speed train loads applicable in designing bridges and deck vibration control according to Eurocode 1 specifications
Candidate Info
13
years in workforce
8
years at this job
Business Management
Bridge Engineer
- Assemble floating or prefabricated bridges
- Design roadways/bridge structures
- Detect and neutralize mines and other traps
Candidate Info
13
years in workforce
8
years at this job
Business Management
Bridge Engineer
- Assemble floating or prefabricated bridges
- Design roadways/bridge structures
- Detect and neutralize mines and other traps
More Bridge Engineer
Resumes
Bridge Engineer Resume Success Stories
