- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Aircraft Sheet Metal Mechanic Resume Samples
No results found
Candidate Info
years in workforce
years at this job
High School Diploma
Enterprise Development
Aviation Maintenance Technology Program
Kc-135 Aircraft Sheet Metal Mechanic
Performed maintenance work on aircraft, including dismantling, repairing, fabricating, assembling, and erecting all structural components of aircraft and aircraft components.
- Maintained responsibility for final inspection of parts, sub-assemblies, completed assemblies, aircraft, and components.
- Carried out all assigned maintenance duties in accordance with the manufacturer's applicable manuals, policies, procedures, and applicable Federal Aviation Regulations.
- Repaired and maintained all SNC/IMS machinery and hangar equipment relevant to the position.
- Worked with heavy sheet metal performing structural tasks such as removing, replacing, and realigning ribs, longerons, bulkheads, stringers, and fittings in completed skinned assembles and rack modifications.
- Acquired knowledge of aircraft design and structure as well as testing procedures and prevention of metal corrosion.
- Utilized knowledge of metal strength characteristics (annealing, tempering, and normalizing) to select proper materials for repair.
- Promoted and maintained a healthy and safe work environment through knowledge of relevant equipment, policies, and procedures.
Candidate Info
years in workforce
years at this job
High School Diploma
Aircraft Sheet Metal Mechanic (wg3806-08)
Provided specific instructions to crew members to assist them in accomplishment of assigned tasks.
- Insured that work products met all technical order specifications and inspected complete work for quality requirements.
- Conducted on the job training to insure that skill levels were developed and maintained to accomplish work assignments.
- Received project work orders and/or instructions from the supervisor and assigned them to crew members.
- Made work preparations by assembling required blueprints, technical orders and technical data.
- Arranged required materials and parts needed to complete the assigned tasks.
- Initiated and received Form 202 requesting engineer assistance.
- Communicated effectively both written and verbally, with management, crew leaders, support personnel and shop personnel.
- Observed work in progress to anticipate and resolve issues.
- Insured that crew members were qualified by assuring they were PAC certified and insured proficiency requirements were met with SOJT and SSQ.
Candidate Info
years in workforce
years at this job
Aircraft Sheet Metal Mechanic
Perform aircraft structural repair, rework and modification (MOD)of UH 60 Blackhawk, 64 Apache and CH 47 Chinook.
- Working on reset program, depo, and mwo team familiar of all types of structure, skin, and composite repair.
- Familiar with all types of metal, hardwares, rivets according to size and measurement, knowledge to operate equipment, familiar with army TM manuals blueprint log book and work package.
- Fallow safety program including hazmat tool control and foreign object damage (FOD)
Candidate Info
years in workforce
years at this job
Logistics Specialist
Aircraft Sheet Metal Mechanic
Provides repair, maintenance and overhaul services under contract with the U.S Coast Guard on their C-130H/J model aircraft.
- Repairs and modifies aircraft structures, composites, and structural components of moderate difficulty.
- Troubleshoots, repairs, replaces, and rebuilds aircraft structures, using hand tools, power tools, machines, and equipment.
- Applies technical knowledge of the airframe and applies required expertise in restoring aircraft structural condition and or operation.
Candidate Info
years in workforce
months at this job
High School Diploma
Education
Certificate
Aircraft Sheet Metal Mechanic
Precisely inspected and troubleshot primary and secondary aircraft structures
- Determined the nature and extent of repairs to be made using applicable Technical Orders as official standards
- Experienced at identifying and cold working various aircraft metals
- Remove, fabricate, repair, modify, and install parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skins, and double contour skins using hand or power tools and variety of metal working equipment
- Skillfully completed fabrication work which entailed layout, bending, cutting, forming, and assembling
Candidate Info
years in workforce
years at this job
Aviation Maintenance Technician
C130/c-5/f-22 Aircraft Sheet Metal Mechanic
Interpret engineering blueprints and technical documents for a variety of precision sheet metal operations to manufacture and assemble C-130/C-5 electrical racks and flight deck consoles including, augmented crew stations, overhead consoles, distribution boxes, center consoles and main instrument panels
- Build various C-130, F-22, and C-5 sub-assemblies from blueprints
- Familiar with aircraft tooling; jigs, fixtures and shop aids
- Highly proficient in the use of pneumatic tools
- Trained in proper methods of storage, usage and disposal of hazardous material
- Maintain a safe and FOD free work environment
- Contributed to a 99.8% customer satisfaction rating for 2009
Candidate Info
years in workforce
years at this job
Christian Ministry
Aircraft Sheet Metal Mechanic
Heavy Structural Modifications on Boeing 757 aircraft for commercial customers.
- Work to Airworthiness Directives, Engineering Authorizations, Structural Repair Manuals and customer maintenance manuals.
- Provide Quality work and accurate documentation to customer and FAA requirements.
- *Worked at ST Aero Mobile, AL and AAR in Indianapolis, IN.
Candidate Info
year in workforce
year at this job
High School Diploma
Aircraft Sheet Metal Mechanic
Supervised a contract field team, scheduled work hours, resolved conflicts.
- Cut, trimmed, filed, bent and smoothed parts and verified sizes and fitting tolerances in order to ensure proper fit and clearance of parts.
- Aligned, fitted, assembled, connected and installed system components, using jigs, fixtures, measuring instruments, hand tools and power tools.
- Verified dimensions of cable assemblies and positions of fittings, using measuring instruments.
- Assembled, installed and connected parts, fittings and assemblies on aircraft, using layout tools, hand tools, power tools and fasteners such as bolts, screws, rivets and clamps.
- Aligned and fitted structural assemblies manually and signaled crane operators to position assemblies for joining.
- Assembled and fitted prefabricated parts to form subassemblies.
Candidate Info
years in workforce
years at this job
Mechanical Engineer
Aircraft Sheet Metal Mechanic
- experience in carbon fiber, fiberglass, and sheet metal repairs
- comfortable with vacuum bag procedures as it applies to composite repairs including wet layup and pre prey materials
- diligently manufacture, repair, and assemble aircraft parts and accessories based on blueprint guidance
- researches aircraft technical data and manuals to properly restore structure and strength to damaged parts and accessories
- supervises and trains new colleagues and held accountable for their work integrity and competence
- manages the tool crib for 2 years which included tool accountability, customer service, stocking shop materials, maintaining inventory, organizing bench stock, ordering parts, and verifying expiration dates on chemicals weekly
Candidate Info
years in workforce
year at this job
High School Diploma
Aircraft Sheet Metal Mechanic
Rebuilt and modified crash damaged AH-64D and AH-64A Apache helicopters to be used as trainers.
- Assembled ground up ECS and Flight Control Apache trainers.
- Examined engineering drawings and fabricated and/or assembled accordingly.
- Fabricated sheet metal parts.
Candidate Info
years in workforce
months at this job
Professional Aeronautics
Mechanical Engineering
AIRCRAFT SHEET METAL MECHANIC III - Aviation Technical Services
Assigned to UPS line working on B-757 and 767 cargo aircrafts.
- Correct all discrepancies found during the scheduled C and D checks.
- Lead a team of sheet metal mechanic in all major repairs and assign job.
- Locate and mark dimensions, layout patterns, and templates and fabricate parts, repair skin and stiffeners, stringers, frames, brackets, fairings, ceilings, side wall and retaining strips, floor boards, extrusions and seat tracks using precision tools, shrinkers, benders , rollers, drills, shot rivets, saw, brakes, shears and grinders.
- Research data and procedures from Aircraft Structural Repair Manual for correct repair procedures, replacement parts and to locate relevant data for the assigned tasks.
- Read work orders, its blue prints, engineering drawings, and engineering work orders and interpret schematic diagrams and charts to accomplish repairs.
- Communicate with other workers for help when needed to fit and align heavy parts to expedite repairs.
- Operate computer system to access aircraft specific technical data, repair manuals, and other manual per FAA regulations thus ensuring compliance per aircraft technical manuals.
Candidate Info
years in workforce
years at this job
Power Plant Technology
Aircraft Sheet Metal Mechanic
Performed major and minor structural modifications.
- Performed inspections, and corrosion control procedures.
- Repaired and performed preventive maintenance on aircrafts.
- Responsible for organizing and executing daily goals.
- Operated forklift, scissor lift, and boom lift
Candidate Info
years in workforce
years at this job
Psychology And Sociology
Social Science
Mental Rehabilitation
Aircraft Sheet Metal Mechanic
- Partially or completely refurbished F-15 wings as needed
- Ordered and installed essential components
- Used tug to move wings from one location to another on Robins Air Force Base
- Went TDY to several Air Force bases to service live aircraft and equipment
Candidate Info
years in workforce
months at this job
Aircraft Sheet Metal Mechanic
H-60 airframe production experience in major sub assembly and final assembly.
- Aluminum/composite floor precision drill up and installation.
- Assembly of major bulkhead and cockpit structures.
- Re-work or replacement of defective or damaged components.
- Joining of composite/aluminum cockpit to canopy structure.
Candidate Info
years in workforce
year at this job
Illesheim
F-22 Low Observable Aircraft Sheet Metal Mechanic
- Performed TCTO of Aircraft fuselage skins
- Removed replaced Fasteners
- Remove clean and treat corrosion
- Cold work Fasteners holes replacement
Aircraft Sheet Metal Mechanic Resume Success Stories
