Aeronautical Engineer Resume Samples

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Aeronautical Engineers are responsible for space and aircraft construction (helicopters, jets, rockets, and military aircrafts). Common duties of an Aeronautical Engineer include conducting research, designing aircraft systems, coordinating test flights, recording test results, and managing computer systems. Based on our collection of resume samples, these experts should demonstrate engineering expertise, creativity, problem solving orientation, time management, and teamwork. Employers select resumes mentioning a degree in aerospace engineering. A Master's Degree is required for senior or research positions.

Looking for job listings? Check out our Aeronautical Engineer Jobs page.

Want personalized resume advice? Get a FREE Resume Review

1

Aeronautical Engineer

Developed external static flight loads to support JSF A1 first flight and A1-SSOR.

  • Generated maneuver response files using ATLAS to model A1 and simulate maneuver responses.
  • Generated linear and non-linear flight loads for the Stress analysis and the Design groups using NLDS.
  • Performed plot checks to validate flight load outputs from NLDS and ATLAS.
  • Created mass & model input files using data provided by Mass properties.
  • Created inertia & fuel databases for Atlas Loads.
Candidate Info
5
years in
workforce
2
years
at this job
BS
Aerospace Engineering
MS
Engineering Management
2

Aeronautical Engineer

Researched and designed support structure for sub-system equipment for the JSF aircrafts using CATIA modeling software.

  • Designed support structure accordingly to mechanical, thermal, electrical, vibration, heat transfer, and environmental specifications.
  • Conducted case studies to evaluate design integrity, interference, manufacturing capability, and cost/weight trade off with stress analysts, structural, electrical, and manufacturing engineers.
  • Coordinated with JSF program partners to review and evaluate designs.
  • Managed the development and design data in PDM to ensure successful completion.
Candidate Info
5
years in
workforce
4
years
at this job
BS
Mechanical Engineering
MS
Systems Engineering
PhD
Engineering Mgmt
3

Aeronautical Engineer Sr. Staff

Lead engineer of the Thermodynamics and Acoustics analysis group for the C-5 modernization program.

  • Completed thermal integration project to install infrared countermeasures in the C-5 from SRR through final verification.
  • Supported efforts to perform the extreme environmental testing of the C-5 at the McKinley Lab.
  • Developed and updated project plans for verification of the thermodynamics requirements.
Candidate Info
21
years in
workforce
3
years
at this job
BS
Mechanical Engineering
MS
Mechanical Engineering
4

Aeronautical Engineer

Held an active secret security clearance.

  • Supported the design by providing Durability and Damage Tolerance parameters on F-35 as built airframe parts, using both crack growth and crack initiation methodologies and software.
  • Coordinated with various IPTs for inspection and modification documentation for life limited parts.
  • Performed structural analysis using finite element methods and classical hand calculations for developing, integrating, and documenting structural requirements.
  • Contributed inputs to various aircraft production boards such as Engineering Review Board (ERB).
  • Conducted structural analysis for trade studies to improve the efficiency of direct manufacturing processes.
Candidate Info
11
years in
workforce
4
years
at this job
AS
Engineering
BS
Aeronautical And Astronautical Engineering
5

Aeronautical Engineer

Assisted the Engineering Core Group in the drafting of the, PM4007, Lockheed Martin Design Manual.

  • Achieved team REA disposition time requirements in order to prevent any delay or work stoppages on the F-16 production floor.
  • Responsible for resolving line-stoppage issues through utilization of the REDLINE process. Quick resolution and coordination with production supervisors was required to prevent an idle the production line.
  • Coordinated with maintenance workers to clarify and identify root cause for issues on the production line.
  • Supported floor production by quickly responding to Request for Engineering Action. Created Engineering Change Notice's to support engineering resolutions to production issues.
  • Selected to support the design of a new Environmental Control System for F-16, Peace Xenia Program.
  • Coordinated with tube mock-up shop on hydraulic tubing issues that were unidentifiable in CATIA due to legacy design.
  • Reversed engineered legacy tubes that were used as tools to manufacture production parts.
  • Create detailed drawings of components in and assemblies in CATIA V4 as well as parts lists.
Candidate Info
3
years in
workforce
3
years
at this job
BS
Mechanical Engineering
6

Aeronautical Engineer

Lead engineer for testing and analyzing HF118, advanced 1700lb thrust class turbofan engine. This incorporated Honda's traditional innovation and GE's rigorous design to meet FAA (Federal Aviation Administration) standards.

  • Took charge of experiments. Responsibilities included engine assembly, temperature, pressure measurements and performance analysis. Discussed results with GE engineers.
  • Participated in a 2-month-long business trip to North Carolina for a flight test called Flight Test Bed. Prepared test equipment onto a Cessna aircraft and analyzed engine data in the air.
  • Performed vibration analysis using oscilloscopes, FFT analyzers, and software called Pulse by Bruel & Kjaer to find resonance frequencies.
Candidate Info
1
year in
workforce
1
year
at this job
BS
Aeronautical Engineering
7

Senior Aeronautical Engineer

Worked on Gulfstream GV modification programs. Performed stress analyses on antenna supporting structure by using hand calculations.

  • Documented structural substantiation reports to meet 14 CFR Part 25 regulations.
  • Provided design guideline and MRB repairs to ensure the airworthiness of aircraft structural modifications.
  • Reviewed engineering drawings, design concept and material/parts selection to meet structural integrity.
Candidate Info
15
years in
workforce
2
years
at this job
BS
Aeronautical / Aerospace Engineering
MS
Aerospace Engineering
PhD
Aerospace Engineering
8

Junior Aeronautical Engineer

Assisted principal engineer and FAA DER in certification planning, and to analyze, produce, and approve aircraft and rotorcraft Type Data in compliance with Federal Aviation Regulations.

  • Created and reviewed drawings of parts and assemblies, Master Drawing Lists, and airworthiness documents for regional ACO approval of aircraft Type Design
  • Performed structural airframe analysis using classical hand analysis techniques and development of solutions in Python using scientific computing stacks (Anaconda)
  • Analyzed the production and structure of carbon fiber for major aircraft modifications and systems
  • Involved in all phases of aerospace product design, from preliminary & detail design to prototyping and manufacturing, and systems evaluation for design changes & ECOs
Candidate Info
6
years in
workforce
2
years
at this job
BS
Aerospace Engineering / Applied Mathematics
Engineering
9

Aeronautical Engineer

Lead engineer for $1.4B Joint Fuze Program between Air Force, Navy and UK.

  • Lead engineer and program manager for $5M/year Reentry Vehicle Applications Program, managing five programs with 40+ government employees and contractors from contract award to contract completion.
  • Developed $25M roadmap for technology investment to support nuclear reentry vehicle enterprise.
  • Program manager for strategic missile integration complex upgrade program ensuring 9 mission essential programs were not delayed.
  • Saved $90M by assessing Minuteman III raceway cable attrition rate by leading a diverse team of engineers and equipment specialists.
  • Fourteen years of experience leading diverse groups in government and private sector industry.
  • Eight years of project management experience in project planning, re-estimating, earned value management, contract management, schedule management, project execution, monitoring and controlling, and project closeout.
Candidate Info
4
years in
workforce
4
years
at this job
BS
Aeronautical Engineering
MA
Master of Arts
10

Aeronautical Engineer

Designed precision manufactured components and assemblies

  • Assessed engineering change orders and shepherded them through team review and approval
  • Generated and revised 3D CAD solid models of avionics components and assemblies with CATIA solid modeling tools, produced engineering drawings with aux views and 2D views
  • Resigned to pursue self-employment business goals and relocate to spouse's location out of state
Candidate Info
9
years in
workforce
7
months
at this job
BS
Mechanical Engineering

Free Professional Resume Critique

We have partnered with TopResume to bring you a FREE resume critique service. Upload your resume and within 48 hours TopResume will email you a detailed analysis of what hiring managers and automated systems think of your resume – and how to improve it.

Browse
Upload Resume File