- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Safety Engineer Resume Samples
No results found
Candidate Info
years in workforce
years at this job
Environmental Resource Management
Sr. Environmental Health & Safety Engineer
Developed recycling program reducing plant trash and waste costs 88% from 2008 to 2011.
- Assisted with Facilities to reduce energy costs 67% from 2008 to 2011 by recommending energy efficient products for installation.
- Implemented ISO 14000 Environmental Management Systems at the facility with assistance from corporate.
- Maintained the ISO 14001 and OHSAS 18001 management systems for a facility of 145 employees, reporting to management monthly indicators and goals
- Prepared monthly and annual reports for State and Federal agencies including Clean Air Act (Air Operating permit), Emergency Planning and Community Right to Know Act (TIER & TRI), and Resource Conservation and Recovery Act (hazardous and residual wastes) requirements.
- Developed and conducted training for EPA Hazardous Waste, DOT HAZMAT, and Health & Safety programs.
Candidate Info
years in workforce
years at this job
Elementary Education
Guidance And Counseling
Sr. Safety Engineer
Responsible for the safety of personnel and facilities on an active square-mile production facility. Investigate accidents and institute needed program changes to prevent recurrence.
- Initiated a Safety Leadership training program for all first-line supervisors which reduced the company recordable injury rate (RIR) by over 50%.
- Served as key member of safety and training coordination groups.
- Managed a hugely successful behavior based training for all employees (SafeStart). Trained over 2100 employees through five consecutive sessions.
- Formalized a new hire orientation presentation to give all new employees a strong background in their new positions.
- Authored over 800 lockout-tagout procedures ensuring day to day maintenance operations were risk free if followed.
Candidate Info
years in workforce
years at this job
Electrical Engineering
Electrical Engineering
Engineering
System Safety Engineer
Developed the Safety Data Packages for the Lightning Imaging Sensor, Optical Transient Detector, and the Solar X-Ray Imager that launched on Expendable Launch Vehicles.
- Developed Flight and Ground SDPs for the Transfer Orbit Stage Extravehicular Activities Tools, which resulted in the successful completion of appropriate safety reviews.
- Performed a Fault tree Analysis on the Transfer Orbit Stage experiment, which was used to verify the electrical design hazards were appropriately addressed.
- Provide Electrical Engineering expertise to the Transfer Orbit Stage (TOS) Project Office's Tiger Team to solve a problem discovered in the electrical design of the TOS system.
- Supported the Tethered Satellite System failure investigation by conducting a Fault Tree Analysis to identify the cause of the failure.
- Provided Electrical Engineering expertise to assist with the Test Stand 116 Fault Tree Analysis to identify the underlying cause of the Test Stand Failure.
- Received the Silver Snoopy Award from the NASA Astronaut Corps and numerous awards and certificates for job performance.
Candidate Info
years in workforce
years at this job
Bachelor of Science
Safety Engineer
Spearheaded the development and execution of multi-million dollar construction projects involving safety and risk management. Directly managed worker compensation programs, related injuries, and return to work programs. Proactively assisted a broad range of Owners, Architects, and Contractors (OAC) meetings, including meeting minutes, scheduling, and following up.
- Designed and implemented key initiatives in support of a comprehensive new hire orientation program, including safe work practices.
- Played a key role in the organization achieving recognition for over 1,000,000 man hours with no lost time accidents.
- Successfully completed the OSHA 500 train the trainer program.
Candidate Info
years in workforce
years at this job
Industrial Education
Occupational Safety
Safety Engineer
Developed and implemented Domestic Unit Safety Plan, tracking 30% decrease in injuries within the first year
- Aided in the development of a Global EH&S Aspects/Hazards 14001 Program
- Developed numerous EH&S Policies, Programs, Guidelines, and Handbooks, including implementation and training requirements
- Provided Professional Safety Engineering guidance to field technical staff
- Developed and implemented Injury Reporting Program, and supported other EH&S activities in the Caribbean/Latin American and Asia Pacific regions
- Interpreted regulatory requirements and developed compliance oriented practices and guidelines
- Conducted safety surveys of field locations identifying immediate/potential hazards and established action plans and follow-up procedures
- Conducted training presentations in broad range of safety related topics
Candidate Info
years in workforce
years at this job
Chemical Engineering
Industrial Health & Safety Course
Environmental & Safety Engineer
Conducted Industrial Hygiene monitoring resulting in verification of compliance.
- Evaluated ventilation systems to decrease employee exposure to pollutants giving employees confidence in the work place environment.
- Investigated accidents and implemented changes where needed resulting in reduction in accidents and workers compensation costs. Increased time between Lost Time Accident's by 100%
- Led safety meetings resulting in more efficient direction to safety improvements
- Liaison for all EPA and OSHA interactions resulting in improved relationships with the agencies.
Candidate Info
years in workforce
months at this job
Ssho Level Iii
Process Engineering
Iso Lead Auditor
Sr. Safety Engineer, RD Worldwide
Identified and coordinated corrective actions of over 300 safety and environmental violations at five (5) facilities in California and Michigan.
- Received zero discrepancies during Washtenaw County Environmental Inspection.
- Trained over 200 employees in OSHA required safety topics.
- Created CY training schedules, prepared PowerPoint presentations.
- Coordinated inspections with the Fire Dept., Insurance Carrier and County EPA Inspectors.
- Initiated forklift, crane, emergency evacuation, and hazardous material storage/training procedures. Project Completed
Candidate Info
years in workforce
years at this job
Civil Engineering
Dam Safety Engineer
Conducted dam safety inspections and wrote high quality technical reports documenting current dam safety conditions and supplied feedback to dam owners involving dam safety related recommendations. One year experience in field work and data collection relating to dam safety issues.
- Reviewed and commented on schematic designs submitted to TCEQ Dam Safety involving approval for construction of dam and hydraulic structures and ensured that dam safety concerns are met.
- Conducted Steady State Simplified Breach Analyses, Unsteady State Breach Analyses and Hydrology and Hydraulics studies to review and approve submissions by Engineering consultants.
- Obtained professional experience applying water resource models relating to dam hydrology and hydraulic capabilities. Performed hydrologic research and analysis to forecast dam breach flows and dam breach inundation areas.
- Created flood plain maps and 1-D hydraulic models for H&H Analysis. Working knowledge of HEC-HMS & HEC-RAS.
- Reviewed Emergency Action Plans and corresponded with dam owners to achieve strategies for dam emergencies.
- Achieved above average marks on interaction with fellow engineers and completing inspection quotas for current fiscal year.
Candidate Info
months in workforce
months at this job
Management Of Project Management
Safety Engineering
Information Systems And Operations Management
Safety Engineer
- Helped employer lower costs of insurance and complied with regulations related to health and safety
- Designed construction drawings with Auto CAD
- Collaborate with 2 safety engineers to analyze historical programs and forecast risk for current program
- Reviewed 2 safety programs to ensure compliance with all government regulation
- Developed and revised Pre-Construction Safety Report, Observation Summary Report, and Monthly Safety
Candidate Info
years in workforce
months at this job
Health Science
Safety Engineer Intern
SHRA is a joint Powers Authority created a public agency by the City and County of Sacramento.
SHRA is the lead public agency and public developer for the city and the County regarding affordable housing, public housing and redevelopment projects and issues.
- Participated in creating an asbestos notification program that complies with the county regulation
- Created monthly bulletins to communicate health and safety awareness to all agency employees
- Participated in employee ergonomic evaluations and training
- Modified the evacuation plan and designed a new Agency Assembly area using AutoCAD program
- Identified and categorized all chemicals used or stored in all the Agency kitchen areas and break rooms
Candidate Info
years in workforce
years at this job
Engineering Technology
System Safety Engineer
Performed transport, handling and loading procedures for US Strategic Bomber B1-B nuclear warheads.
- Assessed and updated ground support equipment safety analyses per equipment modifications.
- Maintained safety records of mishaps involving the Space Shuttle during pre and post flight processing.
- Conducted preliminary safety analyses of NASA Space Experiments.
- Responsible for visitor safety for on-site tours of Space Shuttle mock up.
- Provided Mission Support as a system safety team member during space shuttle mission.
Candidate Info
years in workforce
years at this job
Nuclear Engineering, Gpa 34, Cum Laude
Nuclear Engineering, Gpa 37
Nuclear Criticality Safety Officer / Criticality Safety Engineer
- Provided criticality safety support for the ETTP gaseous diffusion facilities D&D projects
- Developed, reviewed, and implemented over twenty NCSEs and NCSDs using engineering calculations and Monte Carlo computer code SCALE/KENO-V.a in compliance with DOE regulations
- Provided support for development and issuance of work packages and procedures
- Provided daily field support to insure activities were conducted within criticality safety requirements
- Served as the liaison for criticality safety matters between the D&D personnel and the NCS organization
- Recognized and responded to observed or reported anomalous conditions affecting criticality safety
Candidate Info
years in workforce
year at this job
Planning And Preparedness
Safety Engineer
Implemented and enforced OSHA, DOT, and Federal & State safety regulations through weekly jobsite safety inspections, holding weekly safety and daily toolbox meetings, conducted OSHA 10 & 30 Hour training programs, and reviewed JHA/JSA prior to commencing work activities for Austin, San Antonio and Houston sites.
- Conducted site accident investigations, coordinated medical treatments, and guided injured worker insurance company and risk management dialogs.
- Developed and delivered training on Hazardous Materials Remediation, Hazardous Waste Operations and Emergency Response, Water Intrusion, LEEPS (Storm Water & Pollution Control).
- Directed subcontractors in safely deploying spill response equipment to enforce EPA/TDEQ regulations.
Candidate Info
years in workforce
years at this job
Chemical Engineering
Process Safety Engineer
Developed and maintained PSM program for process areas
- Participated and led PHA's, certified via Primatech
- Led PHA's for R&D pilot plant and lab scale processes
- Conducted incident investigations utilizing Apollo, 5-Why methodology
- Generated hazard assessment models through Trace and Aloha programs
- Reviewed and administered the MOC program for 200 plus pilot plant and lab operations
- Green Belt Certification, 40hr Hazwoper, Incident Commander trained
Candidate Info
years in workforce
year at this job
Mechanical Engineering
Safety Engineer
- Plants were consolidated and given the position of Safety Engineer where plant is a VPP Star site.
- Implemented and created Policies and Procedures on Safety for 1000+ employees in English and Spanish.
- Participated and spearheaded audits concerning insurance, OSHA audits and other audits as required.
- Involved in committees that have plant floor employee participation.
- Conducted training sessions, new hire safety orientations and interacted with first line supervision in English and Spanish.
More Safety Engineer
Resumes
Safety Engineer Resume Success Stories
