- Featured in:
Additional Metal Work Resume Samples
Sheet Metal Mechanic Resume Samples
No results found
0-5 years of experience
Responsible for production and completion of quality repair of aircraft component parts with assigned blueprint independently and efficiently by specification manual and blueprints, drawings, sketches.
- Independently prepared, layout sheet metal by cutting, forming, deburr, assemble, install parts on aircraft.
- Bucking rivets with different kinds of material such as aluminum, stainless steel, alloy steel, titanium, and magnesium.
- Capable of reading and interpret various types of blueprints including, but not limited to one, two, or three dimensional, orthographic and line standard.
- Expedite in the use of precision measuring tools like 6" scale, micrometer, caliber, depth mic, height gauge, and the use of standard tools like tape, ruler, pan brake, slip roll, crimper, c-squeeze, punches, hammer, hand slip, chisel, shrinker/stretcher.
- Capable to use power tools like pneumatic rivet gun, rivet squeeze, band & circle saws, sander, grinder, drill. Worked with different types of rivets such as universal, flush head, flush shear heads.
- Able to use and operate crane
10+ years of experience
All areas of manufacturing, contributing significantly to work processes and preservation and packaging of final products. Responsible for the development of policies, procedures, and processes related to preventive maintenance and calibration activities. Effectively communicate with all levels of personnel and management officials on department efforts.
- Fabricate aircraft parts utilizing CAD-CAM software and NC controlled machinery
- Reverse engineer tools for data retrieval to verify product accuracy
- Manufacture a variety of aircraft and non-aircraft parts utilizing hand and machine forming and stretching and shrinking of sheet metal components
- Assemble and set-up for welding, referencing material specs, dimensions, and angles per drawings and aircraft to maintain blueprint tolerance
- Use various hand and machine forming techniques to accomplish difficult forming contours
0-5 years of experience
- Successfully supervised several Home Depot RTU installations on a rigorous schedule.
- Maintained safe working conditions at the ATK (Elkton, MD) job site, which was occupied during construction. Organized sub-contractors and assured deadlines were met.
- Rewarded for overseeing early completion on the Phillip Cohen (Wilmington Riverfront) project.
0-5 years of experience
Responsible for assemblies and repairs in military aircraft F15, F16, F22, C130, and P3 in accordance with the appropriate technical manuals.
- Responsibilities included installation of hardware, drilling, countersunk, riveting, remove fasteners, electrical bond, electrical assemblies, sealant, and safety wire.
- Responsible for set and operate brake press, punch press, air press, hydro.
- Handle calibration, blue print reading, schematics, inspection, and quality control procedures.
- Responsible for preparing forms, records, reports, and discrepancies.
- Ensured safety compliance FAA, OSHA, ISO.
10+ years of experience
lays out, fabricates, assembles, installs and repairs sheet metal parts
- Knowledgeable of working characteristics of metallic and non-metallic materials
- Used hand tools, machines and equipment, Supervised 25 other employees responsible for delegating jobs at the worksite
- Read and interpreted blueprints and sketches
- Determined sequence and methods of fabrication
0-5 years of experience
- Operator certification for Cadmium Brush Plating, Certified in operation of forklifts, manlifts and high reach booms.
- Performed work on these Aircraft MD80, MD90, B717, B727, B737, B757 and B767 including B, C and D checks and Cargo door modifications, Aircraft open up, Jacking and Shoring, Fire/Smoke mods, Structural Repairs, Engine removals, Landing gear and Fuel tank entry.
- Executed heavy repairs including Floor beams, Seat tracks, Frames, Seal depressors, Scuff plates, Main Cargo Door hinge assembly, Stringers and exterior Fuselage damage, Cowling repairs
- Installed and/or fabricated Doublers, Splices, Instrument cover plates Track seals, Hook seals, Floor boards, Miscellaneous Brackets, Angles, Liner, Fairings, Hose clamps, Access panels and Windows.
- Prepared areas for Scribe line inspections as well as other inspections by method of Stripping, Cleaning and Sealant/Fastener removal. Responsible for corrosion removal and prevention.
- Removed and reinstalled updated Interiors, Emergency equipment and Placards
6-10 years of experience
Responsible for installing, modifying and maintaining various components of aircraft sheet metal.
- Perform the tasks of reworking, repairing, fabricating and installing the complex internal and external aircraft structural assemblies.
- Handle the responsibilities of removing and disassembling worn out or defective parts of aircraft.
- Responsible for performing preventive maintenance, maintaining the supplies and adhering to policies of the company.
- Handle the responsibilities of performing checks, removing components and carrying out inspections.
- Repairing, updating, installing mode, refurbishing S-61T
- Assembly & Sub assembly
0-5 years of experience
Determine project requirements, including scope, assembly sequences, and required methods and materials, according to blueprints, drawings, and written or verbal instructions.
- Fabricate or alter parts at construction sites, using shears, hammers, punches, or drills.
- Drill and punch holes in metal, for screws, bolts, and rivets.
- Transport prefabricated parts to construction sites for assembly and installation.
- Train, or supervise new employees or apprentices.
- Install ducts for high efficiency heating, ventilating, and air conditioning (HVAC) systems to maximize efficiency of systems.
10+ years of experience
Responsible for planning, lying out, assembling, installation, and repairs of sheet metal parts, equipment, and products.
- Reads plus interprets blueprints, sketches, and product specifications to define sequence methods of fabricating, assembling, and installing sheet metal products.
- Selects gauge type of sheet metal, like galvanized iron, copper, steel, aluminum, or nonmetallic material, like plastics or fiberglass, according to product specifications.
- Lays out as well as marks dimensions plus reference lines on material, using scribers, dividers, squares, and also rulers, applying knowledge of shop mathematics and layout techniques to develop trace patterns of product or parts or using templates.
- Sets up and operate fabricating machines to cut, bend, block form, or straighten materials.
- Shapes metal material over anvil, block, or other form, using hand tools.
- In charge of inspecting and installing assemblies for conformance to specifications.
- Trim, file, grind, deburr, buff, and smooth surfaces using hand tools, power tools, and lifting handling devices.
6-10 years of experience
Mechanical Verification Process)/Structural Repairs/Rework
- 737 Fuselage assembly upper/ lower panels and Structural repair and rework
- Assist in building 737 model 700 800 900 and military P8-A
- Read and interpret blueprints, closely follow the MVP process, drill and countersink close tolerance holes, cold work, seal, shot and inspect my own work
- Utilize tools in the assembly of components into sub-assemblies or end items (shooting and bucking rivets)
- Structural repairs/rework consist of modifying per inspection notations to skins, stringers, keel beams and ribs on completed planes
- Was 1 of 6 employees that voluntarily traveled to Seattle, WA to help the company timely meet crucial and significant deadlines
0-5 years of experience
Fabricate, modify and repair all structures of the MD 500 series, installation of ribs, stringers, stiffeners, belly skins, firewall installation, pie skin
- Ability to interpret blue prints and drawings.
- Provide my own tools for installation/removal of riveting, close tolerance drilling, cutting, Hi-loc installation, electrical bonding, safety wire installation, cutting and shaping or various materials.
- Work with various hand squeezes, pneumatic tools
- Knowledge of environmental sealing, mixing, edge sealing, fay seal
- Coordinate safe movement of helicopter location in and out of Hanger
- Able to work in teams of two for the installation of rivet fasteners, aluminum, monel, Hi-loc installation
- Solid and blind rivet installation/removal, structural layout
0-5 years of experience
Installed HVAC systems in residential and commercial sites.
- Installed systems in new construction as well as in older buildings.
- Engaged in troubleshooting when needed to make system work appropriately.
- Maintained already-installed systems for customers that were having issues.
- Performed HVAC system repairs as needed.
- Replaced older HVAC systems with newer ones as needed.
10+ years of experience
Inspection or first article. Evaluate the qualifications, professional capabilities and quality.
- Manage everyday operations of the Co.'s costumer requirements.
- Investigated and evaluated materials, systems and equipment for work orders
- Blue print reading stamping inspection reports material control number.
- Fabriwin, Metalsoft and Trump application programming. (CAD/CAM)
- Punching machines Se/Up (Finn power, Amada and Stripped). Brake press set/Up, machines (Wison and Amada). Notching, Rolling, Drill press Set/up (C sink-C bore).
- Hardware installation. Reading of precision tolls. (Caliper, pins, micrometer, high gage, radii and angles gages.)
0-5 years of experience
Travel to customer sites to prefabricated parts to construction sites for assembly and installation.
- Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds in order to assemble components into products or to repair sheet metal items
- Converted blueprints into shop drawings to be followed in the construction and assembly of sheet metal products
- Lay out, measure, and mark dimensions and reference lines on material, such as roofing panels, according to drawings or templates, using calculators, scribes, dividers, squares, and rulers.
- Select gauges and types of sheet metal or non-metallic material, according to product specifications.
- Inspect individual parts, assemblies, and installations for conformance to specifications and building codes, using measuring instruments such as calipers, scales, and micrometers.
0-5 years of experience
- Examining Commercial Mechanical, Architectural, and Sheet Metal Drawings.
- Installation of all and any related materials and equipment for rough and finish work.
- Coordinated with other related trades to resolve any conflicting areas on job by design.
- Assisted on HVAC Special Projects involving multiple rooftop and indoor units.
- Maintained a clean and safe work environment.
0-5 years of experience
Read and interpret blueprints for the proper installation of sheet metal products
- Lay out, assemble, install and repair sheet metal parts, equipment and products utilizing knowledge of working characteristics of metallic and nonmetallic materials, hand tools, power tools and equipment
- Weld, solder, bolt, rivet, screw, clip, caulk or bond parts to assemble products, using hand tools, power tools and equipment
- Install assemblies in supportive framework according to blueprints
- Trim, file, grind, deburr, buff and smooth surfaces, using hand tools and portable power tools
0-5 years of experience
- Fabricate and installation of duct work on commercial and residential work sites
- Ensured proper installations through accurate reading of blueprints
- Experience in MIG welding
- Occasional foreman on smaller commercial jobs
- Able to order materials needed to complete a job
- Collaborated with other trades to ensure smooth workflow and efficient organization
6-10 years of experience
- Responsible for completion of all sheet metal and duct work on job-site
- Knowledgeable in analyzing and implementing blue prints
- Effectively accomplished detailed inspection of the premises to maintain orderliness and safety
- On site fabrication of materials
- Conducted crane work and effectively set roof top units
- Capable of running major building lifts
0-5 years of experience
Accountable for overhauling, fabricating and repairing of the P-3 aircraft
- Replacement of Center wing box per aircraft Drawing, drilled and reamed holes to size and installed with quality inspection buy off • Depo Level nacelles (old parts on new parts) Located and drilled to size per aircraft drawing and installed
- Removed and replaced lower rudder in accordance to work order and aircraft drawing (fabricated new parts drilled and installed)
- Installed lavatory per aircraft drawings along with lavatory walls and floor structure
- Located and reamed to size bearstrap to fuselage (critical part of plane)
- Fabricated aircraft parts from metal for wings, fuselage and interior of plane
- Fabricated, located, and drilled repairs for fuselage
- Final F.O.D. crew of interior of planes for customer buy off • Team member of crew acknowledgement for fastest aircraft project documented in the region year and a half project completed in nine months
10+ years of experience
- Twenty-five years experience
- Installation and maintenance of HVAC systems - primarily in hospitals and commercial buildings - galvanized/stainless steel and aluminum duct work.
- Installation of industrial fans and fan power units, manual and motorized dampers, fire dampers, flues, outside air louvers, roof curbs, stainless steel hoods for labs and kitchens, and other miscellaneous tasks as necessary.
- Drawing and laying out fittings as required.
- Installation of heating/cooling systems on single family and multifamily residential units.
10+ years of experience
- Twenty-five years experience
- Installation and maintenance of HVAC systems - primarily in hospitals and commercial buildings - galvanized/stainless steel and aluminum duct work.
- Installation of industrial fans and fan power units, manual and motorized dampers, fire dampers, flues, outside air louvers, roof curbs, stainless steel hoods for labs and kitchens, and other miscellaneous tasks as necessary.
- Drawing and laying out fittings as required.
- Installation of heating/cooling systems on single family and multifamily residential units.
0-5 years of experience
Aircraft cargo door installation, structural repair, and modification
- Conversion on DC8 and B727 aircraft
- C check and D check on DC9
- Sheet metal hangar repair and modification
- Corrosion control
- Heavy D checks, skin change, C checks Boeing 727, 737, 747, 757, and A300.
0-5 years of experience
Fabricated, installed and maintained ductwork and other metal parts.
- Installed air conditioning/heating system ductwork.
- Installed assemblies in supportive framework according to blueprints.
- Repaired and maintained sheet metal products.
0-5 years of experience
Trimmed, fitted, scribed, drilled and routed aluminum details.
- Dust blasted titanium and low carbon steel parts.
- Installed panels on air conditioning ducts.
- Assisted resistance welders during the welding process.
- Assisted fusion welders for fitting of parts.
- All parts were manufactured for C-130J sub assemblies.