- Featured in:
More Truck Mechanic Resumes
Use these Truck Mechanic samples as a guideline or visit our extensive library of customizable resume templates.
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Additional Mechanics Resume Samples
Truck Mechanic Resume Samples
No results found
6-10 years of experience
- Provided preventive maintenance on medium to heavy duty vehicles.
- Completed DOT inspection according to 49CFR federal regulations.
- Efficiently and accurately performed repair work as outlined in work orders following exact dealership and factory standards.
- Automotive mechanical diagnosis, problem solving and repair experience.
- Ensured federal, state and local procedures were followed in the handling and disposal of hazardous waste materials.
0-5 years of experience
Responsible for maintaining operating condition of garbage hauling vehicles to DOT compliance.
- Serviced brakes and suspension, installed factory parts, changed water pumps, and all preventative maintenance tasks such as oil changes and winterization.
- Conducted pressure testing of charge air coolers to locate holes and carried out repairs as warranted.
- Performed wire feed welding for various repair situations.
- Reported vehicle non-compliances per inspections to ensure trucks were removed from the roadways until restored to standards.
- Completed computerized diagnostic tests to record codes for tracking purposes.
- Emphasized safety, utilizing jack stands and pad locking vehicles during the maintenance process.
- Demonstrated independent direction and judgment on a daily basis.
- Currently possess CDL license with endorsements A, B, C, and D (without air brake restriction).
0-5 years of experience
Responsible for maintaining operating condition of garbage hauling vehicles to DOT compliance.
- Serviced brakes and suspension, installed factory parts, changed water pumps, and all preventative maintenance tasks such as oil changes and winterization.
- Conducted pressure testing of charge air coolers to locate holes and carried out repairs as warranted.
- Performed wire feed welding for various repair situations.
- Reported vehicle non-compliances per inspections to ensure trucks were removed from the roadways until restored to standards.
- Completed computerized diagnostic tests to record codes for tracking purposes.
- Emphasized safety, utilizing jack stands and pad locking vehicles during the maintenance process.
- Demonstrated independent direction and judgment on a daily basis.
- Currently possess classes A, B, C, and CDL licenses (without air brake restriction).
0-5 years of experience
Performed preventive maintenance on fleet of up to 50 vehicles to insure trucks are all running properly
- Performed unit level repair on trucks
- Counted and recorded inventory
- Prepared a service schedule for all personnel to adhere to • Controlled all tools going into and out of the tool cage
- Drove bus to transport reservists to training classes
- Member of MIST team in Washington DC under Joints Chief J-3 in preparation for Uphold Democracy in Haiti
- Participated in Operation Haiti in 1994
- Deployed to Panama for Ocean Venture exercise
6-10 years of experience
Responsible for all Preventative Maintenance and Repairs on 38 pieces of equipment and 41 Trucks & Trailers (Diesel and Gas Powered). Ordered and tracked the status of all required parts. Performing annual DOT and quarterly BIT Inspections. Researched, Identify and documented all On & Off-Road Equipment to comply with ARB Regulations on Emissions. Worked with Site Managers and Drivers to ensure that the equipment and trucks remained operational at all times. Prioritized daily, since multiple work orders were always open.
- Performed all Repairs, except for major engine and transmission repairs
- Troubleshoot and Repair of the small gas powered equipment.
- Implemented a Vehicle Maintenance Program.
- Dealt with all vendors regarding parts and repairs
6-10 years of experience
Solely responsible for maintaining and repairing over 30 pieces of heavy equipment for yard locations in Traverse City, Cadillac, and Ludington.
- Personally evaluate, prioritize, and schedule maintenance and repairs of all assets. Including ordering parts and supplies, documenting history of each asset's repairs and services.
- Constant communication and planning with yard managers to meet yard schedule, minimize downtime, and reduce maintenance cost of all assets.
- Perform wide variety of repairs and rebuilds such as hydraulic systems, diesel engines, heavy transmissions, axles, air brake systems, and electrical systems.
- Fabricate and build a wide variety of asset accessory needs such as and loader snow pusher buckets, roll off and lugger truck tarp systems, Hilo safety man lifts, etc.
0-5 years of experience
Performed visual inspections, tune-ups, 12-75K, oil filter, fuel filter and component lube chassis inspections
- Replaced front/rear end brake pads, disc rotor drums, front and rear engine seal, rear axle, differentials and fifth wheels
- Rebuilt air dryer, air compressor, oil coolant pump and some electrical systems
- Heavy line removal
- Installed engines & transmissions
6-10 years of experience
Diagnosed and repaired mechanical issues with Ryder trucks
- Inspected and adjusted air brakes, compressors, and lines
- Performed system checks and identified leaks
- Worked on electrical components and wiring issues
- Utilized computer to look up parts and input data of repair details
- Complied with all DOT requirements and guidelines
- Functioned as a team member with 12 other mechanics
- Serviced and repaired 2-3 vehicles per day
- Maintained a fleet of 500 trucks
0-5 years of experience
My job here included many things outside of working on the trucks and trailers. It included maintaining the scale system, helping in modifying equipment to meet the customer's needs.
- Performed routine maintenance on fleet equipment
- Clean and organized shop
- Repair of hydraulic systems including hoses, valves, PTO and pumps
- Maintenance on our bailer/crusher
- Keeping up to date on paperwork
- Ordering of parts and supplies
0-5 years of experience
Maintain the company's two tracker trailers by providing maintenance and mechanical services as needed.
- Operate acetylene oxygen cutting table to cut steel for bridge structures
- Welding, fabricating and fitting
- Maintained a clean and safe shop
0-5 years of experience
Weld/ solder broken parts and structural members, use of electric/ gas welders & soldering tools.
- Adjust and reline brakes, align wheels, reassemble equipment.
- Align front ends and suspension systems.
- Responsible for front & rear end repair to heavy & light trucks
0-5 years of experience
Execute all functions of day to day business management
- Extensive client interaction including needs assessment, problem resolution and cost management
- Facilitate all diagnosis, troubleshooting, maintenance and repair work on heavy truck fleet and equipment
- Perform all aspects of repair work on heavy trucks, including; clutch, transmission, suspension, drive train, fuel systems, electrical, air system, brake systems, hydraulic systems, etc
- Fabricate, construct, install and overhauls on heavy truck components and equipment
- Inventory and parts control
- Welding
10+ years of experience
Performs pre- and post-trip inspections of assigned vehicle and documents checks utilizing the standard DVIR (Driver Vehicle Inspection Report).
- Immediately reports all unsafe situations or service related issues to Route Manager or Dispatch.
- Works closely with Route Manager to improve route efficiencies and identify best practices.
- Notifies Route Manager of any incidents, accidents, injures, or property damage.
- Notifies Route Manager or Dispatch of service interruptions, including blocked containers, closed lots, streets, alleyways or potential safety hazards.
- Communicates customer requests to Dispatch or Route Manager.
- Identifies and reports all containers in need of repair or replacement.
- Ensures the number of containers on the route reconciles to the service level listed on service list.
- Completely dumps all containers and leaves the customer's location clean and free of debris.
- Follows route assignments as directed and completes end of day documentation and check out process.
- Performs all duties as scheduled by Route Manager or Dispatch and assisting other drivers as directed to meet customer needs.
0-5 years of experience
- Check, drain, refill oil and fillers.
- Inspected and repaired shocks and brake fluid lines.
- Manually inspected and changed tires on heavy duty semi-trucks.
0-5 years of experience
Perform preventative maintenance and DOT inspection on trucks.
- Maintenance of truck APU.
- Mount and dismount tires.
- Fix air, fuel and oil leaks on Freightliner and Kenworth trucks and trailers.
- Change brakes, wheel seals, leaking shocks, injector seals, DPF's and other parts.
- Check and correct alignment.
- Perform software updates and diagnose and fix fault codes.
0-5 years of experience
- Perform Routine Maintenance on fleet trucks
- Work on a variety of Freightliners, Volvos, Kenworths and Peterbuilts
- Use DDRS, Cummins Insite, Meritor/Bendix and Service Link software
- Repair HVAC, steering systems, cooling systems, Cummins and Detroit aftertreatment systems, brake systems and electrical systems.
0-5 years of experience
Performed scheduled and unscheduled maintenance of heavy-duty trucks for various customers.
- Performed offsite recovery of downed trucks.
- Performed specialized maintenance of truck air braking systems.
- Performed specialized maintenance of truck air-conditioning/refrigeration systems.
0-5 years of experience
- Fleet maintenance, service, diagnostics, and repair
- Engine replacement and rebuilding.
- Inspect all vehicles on a regular preventative maintenance schedule
- Diagnose any problems that any and all vehicles may have then, make the necessary repairs.
- Vehicle emergency road side repairs.
- Test drive medium and heavy duty vehicles, drop off and pick up from vendors
0-5 years of experience
Caterpillar, Case, Komatsu, Mack 10 wheel dumps, and F150 through F450 Ford trucks
- •Schedule, diagnose, and carry out in-shop repair/replacement and preventative maintenance of electrical, hydraulic and air conditioning systems, transmissions/clutches, engines (diesel and gas)
- •Parts fabrication/restoration
- •Daily use of forklift
- •DOT inspections
- •24/7 on-call for site repairs
- •Locate parts via phone and internet; inventory control and stock purchase
- •Contract with City of Waltham - Set up plows and sanders
- •Contracts with MA and various cities - 24/7 repairs done with service truck during storms
- •Small equipment repair: plate compactors, chain saws, jack hammers, generators, pumps, Stihl cut-off saws
0-5 years of experience
Perform routine maintenance such as checking batteries and lubrication al around truck.
- Install PTO's, hydraulic tank, run wires and installation of controls inside cab.
- Inspect and install air brakes, tires, rims and front and rear alignments.
- Diagnose and repair vehicle heating and cooling system.
- Install air shields and rear wheel fenders.
- Install lift axles, run air lines, wires, and control switch for proper operation.
- Modify diesel engines to natural gas, Install natural gas tanks and hoses.
- Inspect and adjust engine valves, replace injectors, radiators, and A/C compressor.
- Remove and replace sleeper and day cabs
- Install CB radios, CD players, spot lights, fog lights and strobe lights.
- I also have experience on installation of dump body, some welding, and fabrication.
0-5 years of experience
Perform PM Maintenance on Fleet vehicles and owners personal vehicles
- Maintenance on heavy equipment including bulldozers, and loaders
- Perform major repairs on tractors including transmission, rear end rebuild, and clutch replacement
- Inside repairs such as stereo systems, CB radios, heating and air conditioning, all aspects of wiring
- ASE Certified in air conditioning
6-10 years of experience
Diagnosed and repaired deficiencies on Semi-Truck/Trailers as needed.
- As lead mechanic, I supervised one other mechanic and communicated with transportation manager to set priorities for the shop.
- Trained drivers and others in the proper operation of vehicles and equipment and safety issues of the shop and the rendering plant as a whole.
- Maintained personal files on repairs, parts on hand, and the ordering of tools, consumables, parts, and other necessities needed for the shop, dealing, daily, with outside vendors and service companies to accomplish the mission of the rendering plant as a whole.
0-5 years of experience
Perform preventive maintenance on trucks and put back into service in a timely manner
- Troubleshoot any hydraulic problems on lift trucks
- Remove and install engines, transmissions, axles, rear ends, etc
- Work on brake systems
10+ years of experience
Responsible for installing repaired cranes, lifts and hoists as well as providing mechanical support in order to ensure the proper functioning of all equipment
- Perform the tasks of repairing and lubricating cranes and hoists
- Perform the tasks of operating forklift and driving service trucks
- Checking and troubleshooting electrical and hydraulic systems
- Ability to read blueprints as well as schematic drawings in order to determine related work procedures
- Responsible for operating mobile and tower cranes to move, lift, place, or position materials and equipment
- Handle the responsibilities of troubleshooting remote control systems and variable frequency drive
- Responsible for performing routine maintenance work (lubricating and cleaning cranes)
- Possess good time management and organizational skills
- Ability to work effectively at heights or in confined areas
0-5 years of experience
Repair and replace damaged or worn parts.
- Dismantle and reassemble heavy equipment using hoists and hand tools.
- Operate and inspect machines or heavy equipment to diagnose defects.
- Clean, lubricate, and perform other routine maintenance work on equipment and vehicles.
- Read and understand operating manuals, blueprints, and technical drawings.
- Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment.
- Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.
- Repair, rewire, and troubleshoot electrical systems.
- Adjust, maintain, and repair or replace subassemblies, such as transmissions and crawler heads, using hand tools, jacks, and cranes.
- Weld or solder broken parts and structural members, using electric or gas welders and soldering tools.
- Maintain all-terrain cranes Listen to crane operators complaints to find and repair problems Maintain Kenworth and Peterbilt trucks
10+ years of experience
- Performs inspections, preventative maintenance, service and repairs on entire fleet of diesel trucks and automobiles, as well as machinery, and Toyota propane and diesel fork lifts at all company locations in NY and CT. Repairs and service are done both in-shop and roadside.
- Welding, painting, sand-blasting and extensive hydraulic repair on vehicles and heavy equipment as necessary.
- Completes inventories and parts orders on a daily and weekly basis.
0-5 years of experience
Maintain and service a fleet of trash trucks
- Experienced diesel engine rebuilds, and trouble shooting on various types of engines (Cat, Mac, Peterbilt, MaxxForce, and Cummins)
- Complete Suspension rebuilds on front and rear axles
- Trouble shoot and repair the air brake system
- DOT brake and wheel certified
- Troubleshoot, removal and installation of Allison, Eaton Fuller Manual and automatic transmission
- Certified through [company name] in Preventative maintenance (oil changes, full grease, tire, wheel, brakes and truck inspection)
- Certified in basic fundamentals of hydraulics
- Forklift certified
