- Featured in:
More Mechanical Inspector Resumes
Use these Mechanical Inspector samples as a guideline or visit our extensive library of customizable resume templates.
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Additional Mechanical Engineering Resume Samples
Mechanical Inspector Resume Samples
No results found
10+ years of experience
- Performed any mechanical measurements required at [company name] Defense and Space Systems
- First Article inspections revealed any drawing problems and provided evidence of part compliance or discrepancy.
- Participated in Product Development Teams. Measurements determined process capability and helped determine specs. Drawing expertise used to make drawings clear and compliant with ASME Y14.5.
- Cross sections for metallographic analysis provided evidence of weld and plating compliance or discrepancy. Cross sectioning methods also used for troubleshooting in Failure Analysis.
- Microphotography documented failures and measurements.
6-10 years of experience
Performed thorough inspections of both commercial and residential sites for code compliance.
- Conducted in-depth inspections of electrical, plumbing, mechanical and HVAC systems.
- Evaluated work completed and issued approvals or disapprovals of permitted work.
- Issued violation notices and filed verified complaints.
- Drafted and submitted reports of findings.
0-5 years of experience
Inspected orthopedic implants according to machine blue prints and catalog level drawings
- Complied with designated quality, manufacturing and standard operating procedures
- Initiated Discrepant Material Reports to ensure specifications were met
- Reported and documented accurately any discrepancies in quality
0-5 years of experience
Inspected orthopedic implants according to machine blue prints and catalog level drawings
- Complied with designated quality, manufacturing and standard operating procedures
- Initiated Discrepant Material Reports to ensure specifications were met
- Reported and documented accurately any discrepancies in quality
0-5 years of experience
Performed precision mechanical inspection on components for sub-sea ROVS and robotic manipulator arms
- Ensured proper quality documentation and traceability
- Documented and assisted in developing inspection technique for hydraulic tubing.
- Liaisoned with engineers, buyers, and suppliers to resolve issues with design, manufacturing and quality
6-10 years of experience
Utilized a variety of highly detailed measurement tools and mechanical tests to drive quality inspection and sign off on all mechanical features of assemblies, sub-assemblies, parts and components in order to assure compliance to packaging, finish and dimensional specifications for a wide array of clients, including government projects (which required security clearance). Performed onsite quality inspections and related service for clients.
- Matched assemblies with all parts required on drawings and work order Bills of Material (BOM), and ensured adherence to latest revisions.
- Quickly identified and addressed technical issues and solutions inter-departmentally to optimize quality, serviceability, manufacturability, cost and time to market.
- Developed "living" inspection procedural standards and practices, continually updating documents, integrating up-to-date equipment operation details, safety practices and inspection methodologies, and trained new inspection staff on these guidelines and overall quality standards.
- Reads and interprets complex blueprints and assembly and engineering drawings to assure compliance of finished product.
0-5 years of experience
Performed first article inspections using a CMM with Geomeasure 6000 software.
- Performed complex dimensional and visual inspections of precision machined parts per blueprints and written specifications.
- Documented inspection results, and maintained accurate written product inspection records.
- Required to use precision measuring equipment, including micrometers, calipers, indicators, optical comparators, ring gauges, thread gauges, and pin gauges.
6-10 years of experience
Responsible for verification of the general contractor's compliance with contract drawings and specifications for the mechanical trades for NSLS-II ring building and lab/office buildings.
- Organize and assign required testing and controlled inspections for the general contractor and mechanical subcontractors on the project.
- Review and approve shop drawings, coordinate RFI responses and produce ECN's for scope changes.
- Facilitate coordination of the NSLS-II facility construction with end users.
- Monitor contractor's progress and substantiate progress payments.
- Review validity, scope and value of the contractor change proposals for mechanical work.
- Organize and coordinate the commissioning of mechanical systems.
- Collaborate design efforts with the A/E firm for the fit-out of shelled spaces.
0-5 years of experience
Inspected machining stations and quality control department to ensure conformance to specifications.
- Handled mechanical measurement hand tools (Calipers, Micrometers, Gauges, Hardness test, MP test, etc.)
- Managed and program FARO Gage Plus equipment.
- Responsible for paper flow for 1st Article, in-process and final inspection.
- Read mechanical blue prints and have knowledge of Geometric Dimensioning and Tolerances (GD&T).
- Generated C.O.C. of each job that the company to execute according to ISO9000.
0-5 years of experience
Performed inspections of first article, in process, audits, and final inspection of complicated and close tolerance machined parts.
- Utilized precision measuring tools to measure geometric dimensions and tolerances.
- Determined acceptance of products by using engineering drawings, production prints, and inspection instructions.
- Validated and documented data of machined parts.
0-5 years of experience
Assigns work depending on priorities set by the Operations Supervisor.
- Ensures that operators are following required duties and tasks as prescribed by Millstone SCP's and DWI's.
- Assist in operational and quality issues that operators may encounter during inspection.
- Recommend and implement changes to DWI's through the correct process.
- Support and assist in the training of new operators/inspectors.
0-5 years of experience
Performing accurate and efficient inspections according to approved inspection procedures and protocol on incoming materials and finished goods.
- Properly completing all quality records created during inspections.
- Reading prints and understanding tolerances and dimensions, using OGP.
- Perform transactions in the electronic system (SAP) to process and release product.
- Understanding of ISO 13485 and FDA regulation, performing quality inspection.
0-5 years of experience
Operate CMM (Mitutoyo Geomeasure 6000, Mitutoyo MCOSMOS).
- Create CMM program for use by Quality Inspector in production.
- Performed Receiving Inspection.
- Inspect Incoming Receiving Parts to print dimension with the use of CMM and all required inspection equipment; Caliper, Height stand, Micrometer, Radius Gages, Go/No Go Gages, Optical Comparator, Pin Gages, Thread Gages, Facsimile, profilometer.
- Inspect First Article Inspection (FAI) to verify part meets drawing requirements.
0-5 years of experience
Provided advice for documenting welding and NDE issues related to the project.
- Test welders for multiple job site locations on the project.
- Observe, document, report and ensure contractor is adhering to client specifications and governing agency's codes and specifications in all of the following tasks: welding, piping installation, flange bolt ups, torqueing, abrasive blasting, coating, painting and structural steel installation.
- Coordinate NDE and x-ray activities.
- Instrumental in providing project turnover documentation including, weld maps, as builds, daily welder check sheets, welder qualification records and daily reports.
0-5 years of experience
- Inspect all incoming, in-process, and final product using engineered drawings. This includes cable assemblies, metal parts, configured product and electronic components.
- Separate and quarantine all non-conforming products. Completing all documentation for non-conforming product material reports.
- Involved in daily material reviews to determine proper disposition of rejected product.
- Mechanical inspection tools used: vernier and digital calipers, micrometers, optical comparator, pin gauges, thread gauges, video measuring machine and multimeter.
- In-process and final inspection on a variety of high frequency audio and video transmitting systems, as well as all applicable documentation.
- In charge of auditing all final product configurations before shipping. Proofreading, correcting and completing all necessary paperwork for each order. Heavy volume of serial numbers, model numbers, manufacturing routers and test data auditing.
0-5 years of experience
Responsible for final inspection of wired chassis
- Utilizing of basic hand tools and measuring equipment
- Perform detailed quality control checks from schematics and engineer drawings
- Responsible for inspecting incoming raw materials
0-5 years of experience
Use modern metrology techniques (including CMMs and digital video optical comparators) to verify that incoming custom fabricated goods meet specification per released and/or prototype engineering documentation.
- Interpret mechanical drawings per ASME Y14.5 to evaluate dimensional and geometric compliance (including GD&T).
- Work with Engineering and/or Production to determine if discrepancies require rejection, rework or acceptance with temporary deviation documentation if necessary.
- Accountable to Material Review Board (MRB) for rejections and corrective actions.
- Generate Efficient Consumer Response (ECR) for critical change requirements; communicate with engineering to support generation of appropriate ECOs.
- Evaluate integrity of PCBAs supplied by third party vendors (solder joint integrity, solder balls, trace integrity, etc).
- Hydraulically test incoming pressure rated equipment (up to 20,000 psi). Familiarity with Enerpac pressure systems.
0-5 years of experience
Assignment covering employee leave
- Inspected incoming material for critical dimensions adherence to the source control documents, drawings and first articles.
- Tools used: microscope, drop/height/pin gauges, and XYZ optical comparator.
- Utilized Microsoft Excel for logs of acceptance or rejection.
- Experienced with GD&T (ANSI Y 14.5)
6-10 years of experience
- Inspected complex machined, sheet metal and molded parts
- Skilled in the use of all incoming inspection equipment including optical comparator, Cmm, sine bar, height gauges, programmable video measurement system, and other hand measurement tools
- Responsible for geometric dimensioning and tolerancing in accordance with ANSIY - 14.5
10+ years of experience
Worked with management on expedites and flow through quality control
- Performed independently and with other inspectors to focus on problem parts and suppliers along with using the inspection methods and equipment required
- Operated with engineering on troubleshooting in manufacturing
- Worked with engineering on the disposition and rework of non-conforming products (rework in-house (at [company name]) or return to supplier)
- Worked with management on identifying parts that could be added to skip lot or dock to stock
- Worked with suppliers on problems: print errors or interpretations and problem parts (rework done in the past or what could be submitted for a rework proposal to engineering)
- Worked with engineering and other inspectors on how Geometric Dimensioning and Tolerancing (GD&T) is interpreted if called out on the print.
- Assisted with audits
6-10 years of experience
Inspected, tested, and measured materials and products for conformance to specifications.
- Read blueprints and data manual to determine specifications, inspection, and testing procedures.
- Recorded inspection test data.
- Rejected products, material, or equipment not meeting specifications.
0-5 years of experience
Performs thorough inspection of incoming raw materials and sub-components received from outside vendors using various inspection tools: calipers, micrometers, height gauges, indicators, thread and/or ring gauges, manual CMM per blue print and ANSI/ASQC Z-1.4.
- Documents inspection results in Quality Information Inspection System (QIIS) and SAP databases.
- Completes Full & Limited First Article Inspection (FAI) on parts from outside vendors.
- Completes Non Conformance Material Report (NCMR) form for rejected material/parts.
- Observes current Good Manufacturing Practices (cGMP) and Food & Drug Authority (FDA) regulations.
0-5 years of experience
Approve in-process production
- Confirm specifications
- Conduct visual and measurement tests
- Document inspection results by completing inspection reports and logs
- Create Non-Conforming Material Report (NCMR) for rejected parts
0-5 years of experience
- Interpreting CAD models to create inspection programs for a coordinate-measuring machine
- Operating various Metrology equipment such as tensile tester, profilometers, and X-rays
- Responsible for maintaining Metrology lab equipment
- Writing operation procedures and providing training on Metrology equipment
- Manual inspections of mechanical parts to the mechanical drawing using hand measuring tools
- Performing quality studies as required
0-5 years of experience
Inspected pre and post coating
- Calibrated gages prior to production usage
- Used CMM and inspection gages
- Used MIL-STD-105 inspecting parts going into stock
- Used company inspection manual
0-5 years of experience
Thoroughly inspect vehicle
- Drive test vehicle
- Complete quality control checklist
- Verify frame body according to specs
- Create repair order as required
- Keep file control of vehicles
0-5 years of experience
Perform prototype, layout, first article, in-process and final inspection of all products machined in-house including fixturing and tooling
- Perform incoming inspection on vendor products.
- Write cnc code on a cmm for daily inspection routines.
- Responsible for creation of inspection data sheets.
0-5 years of experience
Conducted first article, in-process and final inspection
- Interfaced with shop supervisors and machinists
- Inspection of precision machined components and assemblies
- Responsible for loading and running of production CNC Coordinate Measuring Machine
0-5 years of experience
- Inspect public school district for mechanical and HVAC systems
- Track and record model and serial numbers on HVAC systems
- Perform data entry as necessary
Mechanical Engineering Cover Letter Examples
