- Featured in:
More Design Engineer Resumes
Use these Design Engineer samples as a guideline or visit our extensive library of customizable resume templates.
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Additional Engineering Resume Samples
Design Engineer Resume Samples
No results found
0-5 years of experience
Job responsibilities included design, development, reliability improvement, and cost reduction of home appliances including refrigerators, gas and electrical ranges and cook-tops using Pro/Engineer and Six Sigma statistical tools.
- Implemented over $3 million product cost reduction projects by redesigning appliance components, identifying and qualifying new competitive suppliers on current products.
- Managed up to 15 projects at a time from concept to implementation by leading cross-functional teams for project scoping, evaluation plan development, prototyping, scheduling, reliability testing, problems resolution, technical reviews, and pilot runs.
- Created design of over 10 consumer interface components for energy-efficient refrigerators exceeding Marketing requirements. Designed plastic, die cast, machined and sheet metal parts and assemblies.
- Submitted 3 publications and applied for 2 patents on the inventions creating new strategic product features, cost reduction opportunities for the business, and protecting company interests in emerging technologies. Received General Electric Award to Inventors.
- Trained over 150 GE engineers and CAD designers as a part of the company's Engineering Development Program. The topics of the training included Engineering Drawings Best Practices, Tolerance Loop Analysis, and GD&T. Received numerous positive feedback from the students and the training managers.
6-10 years of experience
Investigated, performed failure analysis, and implemented corrective actions to improve quality on existing parts, found new suppliers for obsolescent parts, qualified parts from new suppliers, and kept good working relationship with key suppliers.
- Reduced DOA rates of various electronics, optical, and mechanical parts from three in 6 months down to zero in 6 months.
- Set specs, revised Bill of Materials, developed test fixtures, wrote procedures, and trained Associate Test Engineers on various parts.
- Managed a strategic supplier. A single source of instructions and information for many electrical, mechanical, and optical parts to avoid confusion and reduce response time. Ensured specialized parts and assemblies provided by suppliers met company's specifications.
- Made decisions on part disposition. Minimized costs and maximized part availability by judging factors such as parts' age, risk assessment, costs, stock level, and demands.
- Managed multiple projects concurrently and managed changing priorities.
- Familiar with Lean Manufacturing.
0-5 years of experience
Responsible for design and detail of in-house machinery and tooling used in the manufacturing of the company's product line.
- Created assembly drawings, bill of materials and detail drawings for design of roll forming equipment and automated assembly cells increasing efficiency and reducing cost.
- Developed virtual machine layouts used to aid in the design and checking of interchangeable tooling, simplifying design, documentation and outsourcing.
- Collaborated with tool makers to develop next generation machines with emphasis on improving product quality, cycle time and operator safety.
- Recognized user of Solid Edge V-20 3-D solid modeling software, creating large machine assemblies and parametric models saving time on similar to jobs.
- Coordinated overflow design work with local and offshore resources.
0-5 years of experience
Designing fuel tanks, sub frames, enclosures, and mufflers for industrial sized generators.
- Developing detailed shop drawings, bill of materials, saw lists, shear lists, and part layouts using Inventor 2015(70% of the time) and AutoCAD 2015 (30% of the time).
- Maintaining a high knowledge of metal properties. Working predominately with Galvanneal Steel, Hot Rolled Steel, and Aluminum.
- Accurately reviewing customer supplied cut sheets and bills of materials for generators to ensure company designs are compatible with equipment being supplied.
- Implementing iLogic programming at the company by generating iLogic design code to speed up and simplify the developmental stages of a 3D model.
0-5 years of experience
Engineering Design with Hands-on support from conception to airplane delivery
- Worked with IPT environment to release PDM and meet or exceed delivery requirements
- Effectively reduced cross-commodity rejections tags through Payloads Standard Interface Catalog revision project; identified and revised 11 pages of errors and personally corrected 60% of additional errors and potential rejection tag deficiencies
- Designed Structural Support Interface of Interiors Payloads to Aircraft Structure of 777 Aircraft Composites and Metal Structural Design
- Completed 2 Month Payloads Structural Design course
0-5 years of experience
Designed electro-mechanical machines for packaging systems using best practices.
- Developed standard work practices for design and CAD modeling.
- Created three dimensional CAD models and drawings for both parts and assemblies.
- Lead lab testing of electro-mechanical assemblies.
- Recorded, analyzed, reported lab test results and optimized part designs.
- Supported field installed equipment and implemented corrective actions.
0-5 years of experience
Evaluated client needs for individual projects, and provided feedback for any questions and concerns.
- Provided new/optimized designs for completion products used in the oil service industry.
- Created necessary drawings and drafted documents required to build the design.
- Reviewed and approved drawings and documents created by other members in my group.
- Assisted the manufacturing floor with any questions, issues, or concerns.
- Attended weekly safety meetings and training seminars to learn regulations and processes specific to the oil industry.
0-5 years of experience
Design development of exterior components for Honda's fleet of cars. Produced complete design specifications, drawings, and cad data required for manufacturing, and production.
- Optimized design of new blind spot camera detection technology by intelligent packaging of camera in door mirror for improved styling and driver safety.
- Hands on design of windshields, washer systems, wiper systems, camera systems, sunroof, door mirrors, aerodynamic spoilers, and exterior garnish components. Performed design, manufacturing, and assembly tolerance analysis for each system to confirm precision fit, and finish in assembled vehicle.
- Designed rear sliding glass window module for convertible NSX supercar. Developed kinematic simulation to prove feasibility and provide intelligent decision making.
- Person in charge of all communication with suppliers for all design, technical specifications, and schedule related issues throughout the vehicle development cycle.
- Release of 3D data, 2D drawings, test specifications, and application of features for all trim models.
0-5 years of experience
Designed, developed solid state switches, switch drivers, switch matrixes, digital attenuators, amplifiers, hybrids, couplers, power dividers, filters, integrated modules, and antennae distribution networks, passive and active in the frequency range of 10
- Performed detailed analysis, of heat transfer characteristics.
- Reviewed customer requirements, specifications, drafted ATP's, QTP's.
- Coordinated proposal preparation, statements of work, schedule.
- Drafted mechanical, electrical drawing package.
- Produced prototype, tested, updated design.
- Provide manufacturing floor support.
0-5 years of experience
Validated and verified design through the generation of solid 3D models and detailed 2D drawings of knobs, handles and faceplates used in the appliance and automotive industries.
- Designed and delivered 4 wheel drive faceplate used in Dodge trucks.
- Used Geometric Tolerancing on automotive drawings.
- Led a group as Audit Leader for TS16949.
- Participated in the QS-9000 Quality Assurance program.
0-5 years of experience
Responsible for the design and development of robotic assembly cells, robotic end-of-arm tooling, assembly fixtures,
vision systems, and other types of custom industrial automation, along with assisting in general CNC machining.
- Worked with manufacturing customers to design, create or update automation of current machines/processes to improve the customer's manufacturing facility.
- Created 3D custom industrial automation designs using Autodesk Inventor 2015 CAD software.
- Generated CNC G-code programs using Autodesk Inventor HSM Pro 3D CAM (Computer Aided Machining).
- Produced Quotes for customers detailing the description, components, design time, material cost and overall price of potential automation projects.
0-5 years of experience
Design Lead for various target sections and Engineering Liaison to Program specific team members.
- Led a feasibility study which resulted in the successful re-design of the bolt cutter blade assembly which passed the 150% margin testing
- Received a Certificate of Appreciation; Special recognition for my outstanding support to the success of the FTI-01 launch.
- Designed to Military Standards utilizing Pro/Engineer Wildfire 4 and Pro/Intralink 3.4.
0-5 years of experience
Designed Integrated Microelectronic Assemblies and Aerospace and Defense products for applications such as the A-10 Warthog and F-35 Joint Strike Fighter.
- Conducted thermal and structural analyses to ensure that designs met performance requirements.
- Developed custom tooling and fixtures for manufacturing and environmental testing.
- Conducted design reviews, developed BOMs, reviewed and released ECO's.
- Prioritized assignments and worked closely with purchasing and product planning to support delivery milestones and development schedule. Maintained DoD Secret Clearance since 2008.
6-10 years of experience
Designed construction plans - including geometric design, traffic signal design, traffic control, and existing utility relocation
- Reviewed construction plans submitted to the [company name] by consultant engineering firms prior to approval for construction
- Composed memorandums and made oral presentations to [company name] elected officials
- Managed engineering technicians and assisted with construction plan production
0-5 years of experience
Designed and improved production equipment, worked with customers to meet specific product requirements, and implemented process improvements using lean manufacturing and six sigma.
- Managed and led a team responsible for improving the design of a specific belt for a potential
- Improved one of the manufacturing processes to hold tighter tolerances than we were capable of with any other process
- Significantly reduced labor costs and increased production capacity through automation
0-5 years of experience
Produced 3D prototypes and general assembly's using Solid Works.
- Created detailed drawings for sheet metal and structural steel parts, stress analysis
- Designed hydraulic and electrical systems for mobile products.
- Ensure safety of final product, continuously improved product line, reduced waste in the manufacturing process.
- Communicated with sales, management, and plant personnel to achieve set goals.
0-5 years of experience
Researched and developed practical solutions from R&D ideas into manufacturable products using computer assisted drawings, solid modeling, product specifications, and bill of materials
- Developed solutions for in-house technical problems
- Reviewed, created, and updated bill of materials within the companies MRP system
- Traveled internationally to secure overseas military contracts
0-5 years of experience
Supported Caravan deliveries by creating and meeting schedules and supporting after hour production issues.
- Managed, organized, and assisted in the disposition and implementation of engineering change requests generated by manufacturing and process engineering.
- Coordinated with line personnel to correct issues related to current production line and production flight troubles.
- Worked with customer service to address and alleviate design related problems that arise in the field by supporting service bulletin drafting and release and dispositioning manufacturing and latent defect reports.
- Participated in creation of tolerance analysis for Caravan brake system and created drafts for production using GD&T to define critical surfaces.
0-5 years of experience
Helped in ramping the design for multiple running projects and carried out the entire design flow from RTL design using VHDL till the Signoff stage.
- Performed the Area Optimization of the design which helped reduce the congestion and power consumption thus lowering costs
- Wrote Scripts in Tcl and AWK to create templates for summarizing the Logs and Reports generated which helped the entire design team to save time and easily generate inferences.
- Took initiative to organize Knowledge Sharing sessions for fellow trainees to be aware of the work done in each dept.
0-5 years of experience
- Used finite difference, computer aided design and testing with statistical techniques to design munitions meeting the requirements of the customer while keeping within budget & time.
- Project lead of a successful missile warhead design with improved effectiveness at lower cost for the customer.
- Developed initial design of the Navy Hypervelocity Projectile.
- Oversaw the initial assembly of the Guided Multiple Launch Rocket System (GMLRS) warhead.
- Ensured the proper environmental testing of the GMLRS warhead and the IM testing of the Hard Target Void Sensing (HTVS) fuze.
0-5 years of experience
Provided technical, engineering, and production support at [company name] Built in Refrigerator.
- Coordinated and evaluated pre-pilot, pilot, and trial run process and results.
- Performed redesign of evaporator and air compressor specs.
- Verified design integrity, generating and released Engineering Change Notice.
- Generated instruction and detail drawings for manufacturing.
6-10 years of experience
Lead design engineer for many transportation projects (urban roadways, truck corridors, roundabouts, etc.).
- Coordinated with offices with in GDOT and with consultants during the different phases on a project.
- Participated in Public meetings and field reviews. (PIOH, PFPR, FFPR, PAR).
- Instructed, developed, revamped and tweaked training programs for the new hires program (vertical geometry and urban drainage design).
0-5 years of experience
- Created a startup business designing and developing high speed fiber optic transceivers and high speed communications equipment for rugged environments such as Military/Aerospace, Oil/Gas, and Mining Industries.
- Managed complete product development life cycle including project scope of work, project performance criteria, time and cost estimation and component and vendor sourcing.
- Created Accurate and detailed product models using SolidWorks 3-D CAD design software.
- Designed and developed printed circuit boards using Cadence CIS Schematic Entry and Allegro PCB Editor software.
- Troubleshot and solved technical issues arising from initial prototype designs through electrical testing and software/firmware verification.
- Created and maintained quality control documents such as Bills of Materials, product drawings, and other documentation in the Microsoft Office Suite.
0-5 years of experience
Managed and supervised the manufacturing of new incoming product development
- Developed processes and standards in which how new products are to be manufactured
- Created and built BOM/Routing into SAP by Design
- Designed and reviewed product drawings associated in sealing applications
- Worked along with customer service representatives to help with customer inquiries
0-5 years of experience
Led post-silicon microprocessors electrical validation, Control Compensator design and tuning for stability using output impedance, gain, duty cycle tuning and Oscilloscope operations.
- Managed and drove Buck Converter and Voltage regulators Efficiency testing and measurements, PC platform debugging, Phase angle optimization, DAC Linearity testing, Python programming.
- Worked with Electrical designers and produced Compensator Efficiency recipe tables for current and future Intel products.
- Trained fellow engineers and technicians in electrical validation processes.
- Debugged customers' issues and optimized fuse files.
0-5 years of experience
Designed components for multiple types of kilns and multiple jobs
- Worked together with head of engineering and engineering manager to produce schematics, 3D models and shop travelers for production
- Altered and improved previous designs for both form and function
- Worked in a team environment as well as independently to produce designs and handle the transition into modeling and updated technological tools
- Managed all machining design and designed new components to improve performance and durability
0-5 years of experience
Created design template for use in all future drawings
- Designed 3-D drawings based on parameters set by rough sketches and dimensions
- Validated vendor requirements as well as specifications of various projects
- Assisted with quality control in order to insure proper designs were being implemented in manufacturing
- Compiled technical reports which were presented to superiors for verification
0-5 years of experience
Proficient with 2D and 3D GD&T and design principles as well as updating blueprint definition to 3D MBD
- Providing rapid response EO and DCN changes to support 24/7 shop floor functionality
- Designing new, innovative products supporting aircraft including the F-15 fighter and the CCTS-100 space capsule
- Updating older F-15 models with retrofit packages including products made from groundbreaking manufacturing technologies
- Interfacing with multiple departments including Strength, Manufacturing, Dynamics, Tooling, and Procurement to achieve the most effective, cost efficient, and timely engineered products
- Collaborating with other Boeing sites and internationally located partners to satisfy demanding government customers
0-5 years of experience
Assisted mechanical design engineering staff with the design, analysis, test and revision of mechanical and electrical assemblies associated with commercial aircraft based systems.
- Applied Lean principles to leverage process improvements including VBA based automation of time intensive data mining (10X time reduction) and dimensional analysis template development (5X time reduction).
- Performed root cause analysis for hardware failures and implemented design changes to mitigate issues.
- Verified equipment conformance to applicable standards and requirements including REACH, RoHs and DO-160 as well as applicable EASA, FAA and customer requirements for aircraft systems.
0-5 years of experience
Evaluate architectural plans for accuracy and structural component requirements, including wood roof and floor trusses.
- Created component package estimates based on project needs.
- Created component placement layouts using CAD program.
- Engineered individual components to meet local and national building code requirements.
- Communicated with sales associates, manufacturing personnel, customer, and building contractor to ensure successful installation and completion of project.
- Evaluated on-site component related field issues, create and submit repair requests.
- Initiating, Planning, Executing, Controlling, and Closing projects as part of building construction process.
0-5 years of experience
Led a cross-functional team of 5 including engineers, scientists, and a clinician in developing a urological device that helps to mitigate infection risks associated with foley catheters in a start-up like environment
- Generated user needs through customer discovery, networking with and interviewing clinicians and industry professionals in a targeted space, and produced a solution to address them following strictly to FDA Design Controls
- Developed and employed mock SOP's to ensure team's regulatory compliance (513(g), 510(k), Pre-Submission Meeting Request, ISO 13485, GCPs, GMPs, DHF, etc.)
- Produced a high-quality prototype that met our stakeholder and user needs on-time and on budget
0-5 years of experience
Product design and development of surgical instrumentation from concept through to production.
- Designed, developed, tested patented (patent #5,554,167) cost reduced tissue piercing members
- Developed disposable endoscopic tissue thickness measuring gage for usage in conjunction with endoscopic stapling and as a low cost tissue measuring alternative
- As part of a team was involved in the development of following patented surgical devices - Surgical Cutting Apparatus (patent#5,879,365), Apparatus for Applying Surgical Clips (patent#5,833,696), and Biopsy Apparatus and Method (6,142,955)
0-5 years of experience
Creation of new connector designs that meet updated specifications and criteria for new programs.
- Updated designs from Co Create graphic system to become parametric Unigraphics parts to be utilized for library parts.
- Mentored Co-Create operators in their move over to Unigraphics system.
- Assisted in creation of ECTR (Electronic Control Center) SAP PLM system.
0-5 years of experience
- Designed modular furniture from sheet metal, injection molded, machined and extruded components.
- Collaborated with marketing to combine product functionality and aesthetics.
- Created specifications, models, drawings and bills of materials.
- Customized furniture components to unique customer specifications.
- Provided on-site furniture instruction and installation for customers and trade shows.
0-5 years of experience
Design Engineer for space flight hardware structures, aircraft components, missile body housings, and electronic enclosures for various aerospace, defense, and commercial products.
- Created analysis and production CAD models using UG NX, CATIA, and Pro-E consisting of composite panels, sourced components, and machined parts.
- Designed lay-up tooling, and assembly tooling.
- Created assembly drawings and detailed production drawings.
- Participated in core teams consisting of analysis, manufacturing, tooling, and planning.
- Investigated pertinent design factors such as ease of manufacture, availability of materials and equipment, strength-weight efficiency, contractual specification requirements, and cost.
- Provided mechanical engineering support to manufacturing and assembly.
- Designed and developed assemblies to meet structural and thermal requirements
- Presented to customers at PDR/CDR meetings
0-5 years of experience
Authored and coordinated initial design specification for vehicle functions such as Predictive Cruise
Control, Fuel Economy Screen, and Human Machine Interfaces (HMI)
- Modeled vehicle systems and functions using Simulink, Stateflow, and Matlab software
- Analyzed large quantities of data and used compiled results to optimize designs
- Preformed functional validation of computer models and vehicle prototypes
0-5 years of experience
- Designed new products to be quoted to customers
- Improved efficiency to reduce time of producing engineering prints for revisions of current and new products
- Implemented forms in order to increase accountability and facilitate work flow
- Organized catalog prints in order to provide customers with concise drawings of stock parts
- Tested and analyzed performance of products
0-5 years of experience
- Created and revised 3D models using Sketcher, created and revised drawings of aerospace components including castings, forgings, stampings and extrusions relevant to Engineering Change Notice (ECN), Engineering Change Order (ECO) or Engineering Change Process (ECP)
- Created layouts, BOMs and installation drawings for various components and assemblies for wheel and brake group
- Participated in engineering design reviews
- Provided mentoring to new engineering employees in design methods and Unigraphics
- Utilized Unigraphics NX8.5 and Teamcenter software
6-10 years of experience
Designed mechanical equipment from customer requirements concept to project acceptance.
- Created layouts and detail drawings for fabrication and/or purchased parts.
- Detailed drawings of fabrication parts with GD&T information as needed.
- Verified and inspected tolerances of fabricated parts.
- Verified and inspected machine assembly.
6-10 years of experience
Designed various concept layouts of HVAC systems from preliminary design to construction.
- Prepared detailed drawings for structural, electrical and HVAC layouts.
- Checked HVAC drawings for accuracy, precision and materials specification.
- Performed on-site inspections of HVAC schematics and "as-built" drawings.
- Prepared bill of materials.
0-5 years of experience
Analyzed AutoCAD drawings and layouts for anchor bolt, sidewall, endwall, and frames for customer specific blueprints.
- Designed structural frames and layouts for various projects based on state
- Design of specific building features including wide openings requiring
- Verified accuracy of prints prior to being sent to customer for approval by comparing design against drafting issues.
- Produced designs requiring revisions or modifications in order to improve
0-5 years of experience
Responsible for creating production drawings and standard library components for custom conveyors and screens.
- Performed various equipment design tasks as part of the engineering team.
- Created Inventor models and drawings of custom parts and equipment for multiple complex machines.
- Verified accuracy of drawings and material lists.
- Dealt with vendors and shop personnel's questions to assure timely and accurate manufacture of equipment.
- Worked with purchasing, engineering and R&D to facilitate any design changes.
- Collaborated with project management to insure accurate installation.
0-5 years of experience
Customized standard product line to fit specific customer requirements
- Responsible for all design considerations from sheet metal design to refrigeration and electrical drawings
- Managed 20 to 30 projects between design and production phases
- Completion of full Bills of Materials required for purchasing and manufacturing
- Directed multiple draftsman to facilitate in engineering design
0-5 years of experience
(Designed and detailed flying cutoff, progressive and single function stamping dies)
- Created hydraulic in-line flying press systems and press transfer systems
- Designed gagged punch systems
- Created strip layouts for quoting, including cost and tonnage reports
- Brought drawing files up to the latest customer print revision and software levels
- Created new AutoCAD drawings from hand-drawn blueprints
- Worked with design team on large multiple-stage design projects
0-5 years of experience
Design 2.5/10G Tunable VCSEL transmitter for WDM optical communications Metro applications, tunable to 25channels in less than 1ms by using wavelength lockers, EDFA and DSP processor.
- Full RF characterization of tunable laser, this lead BW9 to improve speed from 800Mbs to 5.5Gbps. Model identified problems in Fab that fixed high speed related problems.
- Using HFSS fully characterize butterfly package and improve its performance
- Design zero tolerance Burn In heater controller
- Managed four senior level engineers
0-5 years of experience
Produce ECNs (Engineering Change Notice) and DCRs Document
Change Request (DCR's) as required to support manufacturing, customers,
Quality and certification.
- Produce accurate drawings, preliminary layouts, production details and assembly drawings.
- Embraer program working several monuments like, Fwd Lavatory, Aft Lavatory,
- Design & Redesign parts Assemblies in catia model and converted to autocad and creating tooling for production into catia v5.
- Programs use, Catia v5, Solid works, Autocad and Catia v4.
- Prepare drawings and other engineering data required for the manufacturing of the product designed.
- Produce design or redesign (drawings) for on-site production in a timely manner with respect
0-5 years of experience
- Winner of Design of Medical Devices Conference Competition 2014 - The largest medical device conference in the world
- Designed and prototyped a walker that retards the fall of a person who accidentally slips
- Very cost effective, only adding $10 to the price of current walkers
- Adds a spring-loaded, plunger-type mechanism inside the legs of a walker. The mechanism locks the wheeled footing of the walker, adding stability when weight is applied
- Conceptualized a unique cam and ratchet mechanism
0-5 years of experience
Designing and manufacturing a static test system for developing bi-propellant rocket propulsion systems
- Designing a remotely operated high pressure cryogenic fuel system
- Verifying the structural design will withstand the forces applied by the rocket engine using the finite
- Writing standard procedures for handling cryogenic oxidizers and operating the fuel system
- Researching two-phase cryogenic flow and transportation of cryogenic oxidizers
- Testing and troubleshooting valves in high pressure cryogenic applications
0-5 years of experience
Create 3D computer models and 2D technical drawings of designer, custom, and prototype furniture.
- Support mill, finish and assembly, upholstery, and purchasing departments by providing solutions to manufacturing problems.
- Create and maintain BOMs in MRP system.
- Support for marketing functions. Including 3D file transfer, computer renderings, technical specifications, and trade show support.
- Support for sales department. Including room layouts, cut sheets, general spec drawings.
0-5 years of experience
Active in fast paced projects from pre-construction phase to final production of mozzarella cheese processing facilities.
- Troubleshoot processes such as brine systems and mixer operations.
- Strong involvement in standardizing/improving equipment designs. (iParts/iAssemblies)
- Incorporate OSHA, USDA, and 3A standards into design work.
- Create drawing packages using ANSI Y14.5 and ISO-128 standards.
- Communicate directly with contractors for quotes, fabrication, and installation success.
- Work with Autodesk products daily to design decking packages, equipment, plant layouts, and P&IDs.
- Develop EDS (engineering design standards) manuals for proper documentation of all our latest and greatest equipment for future projects.
Engineering Cover Letter Examples
