- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Controls Technician Resume Samples
Filter:
No results found
Candidate Info
2
years in workforce
2
months at this job
Electronic Technologies
Controls Technician
Performed electrical maintenance on machines that needed new sensors or equipment
- Machine repair with pneumatics and hydraulics and sometimes scheduled maintenance
- PLC Programming and created new programs and/or modified current programs inside a machine
- Troubleshoot with multi meters on a circuit level to using PLC to troubleshoot a machine
Candidate Info
15
years in workforce
3
years at this job
Machinist Mate and Radiological Controls Technician
- Provided oversight on 157 radiological control jobs resulting in no rework.
- Improved the audit, surveillance, and evaluation program on board the USS EMORY S LAND (AS-39).
- Coordinated 6 audit, 32 surveillances, and 5 evaluations verifying proper control of radioactive material.
- Tracked and coordinated corrections of over 300 material and administrative deficiencies.
Candidate Info
5
years in workforce
3
years at this job
HS
High School Diploma
AAS
Electrical Engineering
Controls Technician
- Construction Management Professional
- Conducted Start-Up testing and commissioning of commercial HVAC equipment using software that was then uploaded into the Building Automation System
- Installed low voltage and communication cabling necessary for operating the system
- Performed test's for quality assurance and made sure all Non-conformance items were addressed and resolved by maintaining written reports and documentation
Candidate Info
12
years in workforce
3
years at this job
HS
High School Diploma
BS
Systems
BS
Computer Science
Commercial Building Controls Technician
Systems Programmer with a focus in Electrical/Mechanical Troubleshooting and HVAC Equipment.
- Primary duty included visiting sites and addressing customer issues in timely manner.
- Trusted with minimal supervision to complete work safely, efficiently, and completely.
- Scope of work included programming, computer software and hardware, low and high voltage electricity, networking, server maintenance, and mechanical devices such as actuators and pneumatics.
- Responsible for thorough and technical reports on work completed.
- Able to explain complex technical issues to both trained technicians and inexperienced customers.
- Worked with technicians of other companies to facilitate smooth integration of multiple control systems
Candidate Info
17
years in workforce
3
years at this job
BA
Bachelor of Arts
BA
Nuclear Engineering Technology
Radiological Controls Technician
Qualified HAZWOPER and Asbestos Supervisor
- One of only two technicians qualified lockout tagout.
- Conducting and reviewing of routine radiation, contamination and airborne surveys.
- Responsible for ensuring proper radiological oversight during D&D operations of radiological facilities.
- Involved in the planning of radiological work and providing recommended controls to supervision and management.
- Provides radiological oversight of processing operations during Radiological Emergency Response drills.
Candidate Info
11
years in workforce
10
months at this job
HS
High School
C
Air Conditioning, Refrigeration & Heating Technology
AS
Information Systems & Technology
Controls Technician
Conduct preventative maintenance, repair, installation, commissioned and general service of HVAC automation systems (Metasys) resulting in calibrating and servicing VAV controllers (VMAs) to their efficient working condition
- Diagnosis and repair complex electronic control systems, such as air handler controllers (FECs)
- Test and write modifications of system software using the Controller Communication Tool (CCT) resulting in accurate programming of field devices
- Assist with system installation of communication wiring and field devices for BAS upgrades
- Communicate with the customer upon arrival and before leaving work site to ensure work was completed at its best and fullest to have a satisfactory outcome
Candidate Info
11
years in workforce
10
months at this job
HS
Air Conditioning
AS
Information Systems & Technology
AAS
Air Conditioning
Controls Technician
Conduct preventative maintenance, repair, installation, commissioned and general service of HVAC automation systems (Metasys) resulting in calibrating and servicing VAV controllers (VMAs) to their efficient working condition
- Diagnosis and repair complex electronic control systems, such as air handler controllers (FECs)
- Test and write modifications of system software using the Controller Communication Tool (CCT) resulting in accurate programming of field devices
- Assist with system installation of communication wiring and field devices for BAS upgrades
- Communicate with the customer upon arrival and before leaving work site to ensure work was completed at its best and fullest to have a satisfactory outcome
Candidate Info
8
years in workforce
3
years at this job
HS
High School Diploma
BS
Systems
BS
Computer Science
Commercial Building Controls Technician
Systems Programmer with a focus in Electrical/Mechanical Troubleshooting and HVAC Equipment.
- Primary duty included visiting sites and addressing customer issues in timely manner.
- Trusted with minimal supervision to complete work safely, efficiently, and completely.
- Scope of work included programming, computer software and hardware, low and high voltage electricity, networking, server maintenance, and mechanical devices such as actuators and pneumatics.
- Responsible for thorough and technical reports on work completed.
- Able to explain complex technical issues to both trained technicians and inexperienced customers.
- Worked with technicians of other companies to facilitate smooth integration of multiple control systems
Candidate Info
22
years in workforce
1
month at this job
AS
Electronics Engineering
AS
Avionics Engineering
Electronics Controls Technician Contractor for Kelly Engineering Services
- Provided Engineering, Design, Fabrication, Installation, and Training Technicians to facilitate and implement new automated systems and controls of equipment and machinery used in the manufacturing of contact and intra-ocular surgically implanted cataract lenses.
- Designed, Engineered, Fabricated, and Programmed automated sterile vile filler for packaging of surgical cataract lenses and implemented machine process changes for Contact Lens Grinders to facilitate an improvement in precision of grinding, reducing scrap, and increasing production.
- Engineering and Design for system controls for sterile filling of contact lens, and intraocular lens containers.
- Engineer and Design system controls from conception, thru validation, to installation, and implementation.
- Hands-on work Fabricating Control Panels, Panel Layouts, upgrading and rebuilding of automated machinery and manage projects to deliver completed machine upgrades by expected deadlines.
Candidate Info
20
years in workforce
4
years at this job
BS
Airway Science Professional Pilot
Measurement & Controls Technician III
- Installation, operation, maintenance, calibration, troubleshooting and repair of communication, analytical, measurement, instrumentation and controls equipment.
- Assisted with Chesapeake Contractual Separation in the Barnett South while performing technology upgrade to approximately 300 radios from 900 MHz to 450 MHz
- Program, calibrate and repair various pneumatic and electronic instruments related to both measurement and controls.
- Schedule witnessing of Custody Delivery Point Meter Calibration, Inspection and Sampling.
- Responsible for the day-to-day upkeep and calibration of field measurement equipment.
- Responsible for supporting the monthly gathering system balancing review and any variance troubleshooting of assigned geographical area.
Candidate Info
16
years in workforce
4
years at this job
AAS
Electronic Engineering Technology
Instrumentation & Controls Technician
- Tested, calibrated and adjusted instrumentation devices for pressure, temperature, and levels, both online and offline.
- Responsible for control, bleeder trip, pneumatic, and flow control valves for proper plant operation.
- Maintained work request, logs and reports of work performed in facility.
- Followed strict nuclear guidelines of operational policies and procedures.
- Performed preventative maintenance, testing, repair, and upgrading of equipment.
Candidate Info
8
months in workforce
AAS
Electrical Technology
AAS
Industrial Maintenance Technology
BS
Industrial Technology With Concentration
Controls Technician
- Programming sequencer based PLC controls for complex brewing process
- Maintain and troubleshoot all aspects of control system during shift coverage of entire department
- Involved with installation and commissioning of large multi-department PLC-5 to CLX upgrade projects
- Gained experience with Master-Slave bus I/O devices such as AS-I and Siemens Link20
- Installed and calibrated a vast array of instrumentation: Yokogawa, Rosemount, and Turck
Candidate Info
11
years in workforce
5
years at this job
AS
Irving
Controls Technician
Responsibilities included providing technical and programming solutions for industrial controls installations, troubleshooting and repair of equipment, and customer training. Typical systems included integration of Digital Equipment MicroVAX minicomputers with Yokogawa SLC controllers, GE Fanuc PLC controllers, and Texas Instruments RTU controllers.
- METRO Downtown Seattle Transit Project, installation and programming of traffic control, fire, and security systems
- Village Creek Wastewater Facility, installation and programming of controls and PC network
- Bissell Point Water Shed, installation and programming of control sequences
Candidate Info
3
years in workforce
3
years at this job
BS
Electrical Engineering
Controls Technician
- Troubleshooting and repair of complex hydraulic, pneumatic, and electrical systems.
- Experience with Allen-Bradley PLC's, HMI, drives, servo motors, and related controls.
- Worked closely with the engineering department to provide root cause analysis for complex systems and machinery for reduction of downtime.
- Performed periodic electrical and mechanical inspections and preventive maintenance on equipment to ensure operation in a timely manner.
Candidate Info
8
years in workforce
2
years at this job
Mechanical Engineering
Oilfield Offshore Power Generation and Electrical Controls Technician
- Troubleshoot and repair generators, switchgears, control panels, circuit breakers, and motors
- Troubleshoot and repair motor controllers, lighting, ignition systems, governor control systems, 24vdc systems, PLC's and battery chargers
- Mechanically and electrically align generators to engines
- Alignments on motors to pumps and other various equipment
- Electrical Control Panel Design and Build
Candidate Info
3
years in workforce
2
years at this job
C
Critical Core Manufacturing Skills Program
BS
Engineering Technology
Plant Engineering - Systems Controls Technician
- Responsible for maintenance and troubleshooting of web, wire, and tape extrusion and converting lines.
- Experience with Allen-Bradley Controls; Including Logix 5 - Logix 5000 as well as Siemens, Mitsubishi and Automax PLC's
- Programming and modifying various HMI systems, including Allen-Bradley, Epro and Panel-mate
- Familiar with Allen Bradley servo and motion control systems.
Candidate Info
36
years in workforce
7
months at this job
AS
Electronics Technology
Electrical Controls Technician
- Produce electrical & mechanical drawings, builds of materials and other supporting documentation required for custom control systems submittal process.
- Integrate custom SCADA System monitoring and control telemetry hardware (radios) with company hardware, software and firmware.
- Perform systems installations, integration and implementation of updated control systems at customer sites.
Candidate Info
8
years in workforce
5
months at this job
AS
Industrial Maintenance
Electrical Controls Technician
- PLC adjustments and programming using RX500
- Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.
- Perform regular preventive maintenance on machines, equipment and plant facilities.
- Plan and execute maintenance activities bimonthly with complete followup documentation.
Candidate Info
17
years in workforce
11
months at this job
Instrumentation And Electrical Technology
I/e Controls Technician
- Responsible for the installation, maintenance, and commissioning of all analytical, test, and automated process equipment for various clients.
- Responsibilities include the daily testing, calibration, and maintenance on ABB, Rosemont, Fisher, Allen Bradley PLC's, and a wide range of other brands of instrumentation and electrical process equipment, to the clients exacting standards using O.E.M industry standards.
- Siemens smart positioners, Sampson control valves with Sampson smart positioners, Metso solenoid and control valves.
- Reading electrical one line drawings, P&ID's, ladder logic diagrams for the SIL3 quantum PLC.
- Calibrating Endres Hauser delta bar flow transmitters for steam flow and hydrogen flow.
- Function checks with Yokogawa DCS system.
- Function checks from the HMI, the PLC, and to the hydrogen PSA skid. Troubleshooting control loops on PLC and Yokogawa DCS.
- Working with Sampson and Endres Hauser reps installing parts on transmitter's solenoid valves and control valves.
Candidate Info
6
years in workforce
2
years at this job
C
Industrial Technology
Computer Science
Controls Technician
- Built control panels
- HVAC controls installation. Wiring sensors, Install PLCs, Installed and programmed VFDs
- Reading and understanding blueprints
- Worked on RTUs, AHU, Boilers, Chillers, VAVs, Exhaust Fans, Unit heaters
Candidate Info
11
years in workforce
1
year at this job
Computer Repair
Controls Technician
- Troubleshoot programming/electrical/mechanical failure
- High Attention to sequences and operations
- Troubleshoot Robots/PLC/Work cells
- Part data tracking
- Strong background in mechanical, electrical and technologic machinery
Candidate Info
13
years in workforce
4
years at this job
Electronics Engineering Technology
Controls Technician
- Program AHU's, hot water system, chillers, and other HVAC equipment
- Work with computers, IP addressing and mapping of controls to Building Management System
- Install building automation systems on customers sites
- Work closely with customers and engineers
- Work with and follow wiring diagrams and blue prints
- Wire and Troubleshooting low and high voltage, analog, and digital signals
- Set up and program variable frequency drives
- Start up and commisissioning of HVAC equipment
Candidate Info
16
years in workforce
3
years at this job
Systems Administrator/senior Controls Technician
Server Administrator, Hardware and Software management
- Troubleshoot software, hardware and network issues.
- Software and hardware testing of all drivers and equipment introduced to the environment
- Batch script programming to automate processes
- Maintain DNS and Exchange 2007 Servers
- New application testing
- Troubleshoot SMTP, SNMP, TCP/IP in LAN/WAN Environment
- Create End User documentation/manuals for products
- Design and approve new equipment for [company name]
- LEAN and SIX SIGMA trained
- Provide critical support onsite and via remotely to [company name] customer base
Candidate Info
14
years in workforce
2
years at this job
HS
High School Diploma
C
Completion Of Energy Specialist
C
Industrial Technology
Automation Controls Technician
- Troubleshoot, maintain and enhance the accuracy, reliability and system control's data credibility of PLC and PC based automation systems.
- Effectively utilize building management system's interface tools and equipment to achieve efficiency.
- Communicate and partner with internal engineering staff and equipment vendors.
- Troubleshoot and perform basic design of PLC logic, operator interface terminal, energy management systems and electrical installations.
- Statistically interpret and improve automated system's performance parameters, at macro/micro level.
- Perform Preventive Maintenance for controls and systematize electrical/control parts inventory.
- Coordinate with vendors, installation of electrical or controls; as instructed.
- Maintain accurate record keeping such as: work orders, timesheets, parts requests.
- Maintain parts procedure and inventory control
Candidate Info
5
years in workforce
1
year at this job
BS
Bachelor of Science
Controls Technician/project Manager
- Coordinate design, installation, commissioning and programming of Building Automation and Energy Controls System.
- Interact with customers, vendors, and project teams to ensure proper execution of projects.
- Assist team in the field and design engineers in the office.
- Conduct proper pre-mobilization planning and create a schedule of values to ensure accurate billing.
- Complete and submit written reports and close-out documents covering all aspects of each project.
- Install DDC Controllers and low-voltage wiring.
- Troubleshoot and correct network and device communication issues.
- Read and understand mechanical drawings and wiring diagrams.
- Frequent work on construction sites and follow proper safety measures.
More Controls Technician
Resumes
Controls Technician Resume Success Stories
