- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Structural Design Engineer Resume Samples
No results found
Candidate Info
years in workforce
years at this job
Architectural Engineering
Master of Arts
Structural Design Engineer
Directed cross functional teams to develop innovative design solutions to minimize materials cost while still achieving architectural vision; completed over 4M sq ft of building projects
- Project managed three simultaneous building assignments to meet individual schedules, budgets and design objectives
- Led a five person structural engineering team to design and oversee the construction of the structural building system for a $290M, 722K sq. ft., LEED certified hospital in Birmingham, AL
- Produced one-day turn-around for time-sensitive solutions to challenges in the construction field; reduced wasted man-hours and associated rework costs by 5%
- Controlled multiple analytical models for each building structure from initial development based on schematic design plans, through project evolution, to finalization with specific detailed parameters
- Represented HKS to clients at city compliance reviews, construction coordination meetings with over 20 different sub-contractors, and through daily communication with construction and design team
Candidate Info
years in workforce
months at this job
English
Aerospace Engineering
Aerospace Structures And Materials, Sustainability Annotation
Structural Design Engineer
Internship (5 months) in the Forward Fuselage Structures department of the Joint Strike Fighter project
- Supported shop floor in daily tasks; Revised and created technical models and drawings, using CATIA V4/V5, Teamcenter PDM and VAS.
- Quick learning, working ahead of schedule and ease of communication are reasons the supervisor evaluated me outstanding performance (top 5%).
- Trained as Operating Excellence White Belt
Candidate Info
years in workforce
years at this job
Engineering
Structural Design Engineer
Designed and supported onsite installation of gun bay modifications that reduced heat soak into primary structure and in-flight opening door mechanism.
- Modified existing F22 aircraft wing to body alignment and surfaces between prime and sub contractors to ensure low observable vehicle requirements were within tolerance.
- Completed a rough layout and design of a pneumatic conveyor design to load finished cement powder into railcars.
- Managed plant manufacturing equipment maintenance by creating a database of log times, equipment temperatures and grease viscosities.
Candidate Info
years in workforce
years at this job
Physics / Mathematics
Physics And Mathematics (double Major)
Science Education
Structural Design Engineer
Lead Engineer on Rolls-Royce 777 thrust reverser. Design responsibility for Torque Box and Thermal Insulation.
- Design focal for Thermal Insulation for Wichita Commercial Airplanes.
- Design engineer for 777 41-section. Designed and drew parts in passenger entry doorway and body side-panels.
- Coordinated systems and payload structural interface for 777 41-section.
- Wrote software to extract tracking data from TSO and Dbase applications for SCD (Source Control Drawing) compliance.
- All design work was done with CATIA.
Candidate Info
years in workforce
years at this job
Aerospace Engineering
Engineering
Structural Design Engineer
One of the first engineers recruited to join 747-8 design team. Managed the release of both detail and installation datasets to production. Developed solutions through solid modeling techniques and parts lists creation. Appointed focal for special assignments and company-critical issues. Diagnosed and solved problems such as interferences, part discrepancies, and configuration control with costumer and Integrated Product Team (IPT) members.
- Successfully released 19 engineering data packages, all on time
- Fulfilled company objective by redesigning seat tracks to save 7.25 lbs of weight for the 747-8F
- Represented entire 747-8 design organization as Self Evaluation Co-focal in support of FAA audits
- Served as focal for Production Revision Record (PRR) drawing release effort while supervising 5 people
- Chosen by manager to be part of a "tiger team" effort to achieve 100% drawing release by 6-20-08
- Awarded for superlative performance for fastener count assignment before IPT members
Candidate Info
years in workforce
year at this job
Drafting And Design Technology
Drafting And Design Technology
Structural Design Engineer
Drafting and development of structural projects by the means of creating new structural plans, details and/or revising existing drawings using AutoCAD or REVIT.
- Collaborated with engineers and architects regarding design parameters for client projects.
- Prepared structural framing drawings and required steel detailing for majority of projects.
- Discussed design standards and procedures with the directors of design and architecture.
- Drafted detailed drawings of structures, specifying dimensions and materials needed.
- Created professional to-scale sketches.
Candidate Info
years in workforce
years at this job
Aerospace Engineering
Systems Engineering
Mechanical & Structural Design Engineer - 787 Interiors
Independently managed and coordinated the completion of multiple full scale and component certification tests that resulted in cost and weight savings.
- Prioritized needs, re-organized project schedule, and implemented accountability to schedule in order to turn around certification tests that were behind. Brought project in on time reducing Airplane Ground Time and minimally impacting test schedules.
- Assisted in defining and in the execution of test/ certification strategy that led to the successful implementation of parts made from a new material system. This implementation saved 90 lbs per airplane ship set.
- Managed and coordinated with Boeing stakeholders and the Supplier in aligning supplier data submittals to support customer introductions.
- Efficiently dealt with employee resistance in implementing product improvements through training, support, and issue resolution.
- Co audited supplier processes and manufacturing processes alongside BR&T and Supplier Quality to improve quality of parts received to build final product. Processes include First Article Inspection, Pre-production Verification, and First Part Qualification.
- Managed detail part and test fixture identification, ordering, and tracking through the Boeing supply chain.
Candidate Info
years in workforce
years at this job
Civil Engineering
Structural Design Engineer I
Performed static and dynamic finite element analysis (FEA) on the hull and frames of US Naval submarines to facilitate ship overhauls and new construction as-built conditions
- Designed structural foundations within the submarines to facilitate ship overhauls in a safe, cost effective and timely manner
- Worked within a team to analyze and test a new catamaran hull design under a research and development program
- Implemented quality control programs to verify calculation packages performed by team members
- Served as lead lifting and handling engineer for sub-assemblies and full assemblies in a program to develop new shipyard lifting procedures
Candidate Info
years in workforce
year at this job
Aerospace Engineering
Systems Engineering Level I
Cross Cultural Business Skills
Structural Design Engineer
- Provided machining and fabrication of tooling for composites and bonded panels; completed modeling and tooling design for aircraft structures and bonded panels, coordinated production.
- Completed designs for parts, tooling, and inspected parts for quality assurance.
- Improved composite production processes, increasing the life of the molds.
- Provided engineering solutions for military aircraft such as C-17, C-130, C-5, F-15, F-16, CH-47, E-3, and various commercial aircraft.
Candidate Info
years in workforce
years at this job
Bachelor of Engineering
Structural Design Engineer
Coordinate with Architects, Customers Services and detailers to develop safe, efficient, and adequate building solutions for the customers
- Perform steel and reinforced concrete building designs and their foundations
- Check/approve metal r.c.building design performed by other engineers
- Check/approve design drawings prepared by detailers
Candidate Info
years in workforce
years at this job
Civil Engineering
Structural Design Engineer
Prepared complete structural analysis and design and drawings of steel, reinforced concrete and wooden structures, water tanks, towers and other related vertical structures.
- Supervised preparation of structural plans and working drawings.
- Checked and coordinated structural plans with other design disciplines.
- Evaluated and analyzed the stability of existing structures submitted by other government
- Conducted inspection, evaluation and assessment of damaged structures and submitted
Candidate Info
years in workforce
years at this job
Mechanical Engineering
Systems Engineering
Structural Design Engineer
Structural design and systems integration for F-35 Joint Strike Fighter, Center Fuselage Skins & Doors Integrated Product Team.
- Detailed structural design of metallic secondary structure and composite loft surfaces as well as load path development and assembly layouts using Catia V5
- Conducted trade studies resulting in significant weight reduction and cost savings awards
- Experience in parametric 3D modeling from conceptual to assembly layouts using Catia V5, GD&T and product data management (PDM) software
- Design for manufacture of composite and metallic parts from initial concept through implementation
- Held DOD Secret Security Clearance
Candidate Info
years in workforce
years at this job
Mechanical Engineering
Structural Design Engineer
Utilized CATIA V4/V5 and ENOVIA to support structure design for BAC 787, 747-8, MMA/P8A programs.
- Coordinated with stress engineers for sizings of structural components of Section 46 (747-8I) such as frames and associated components.
- Ran IVT sessions and prepared D1 layout to support 747-8I planning.
- Created detail and assembly drawings for MMA/P8A.
- Created Joint Definitions and FT&A to support structure modification for 787.
Candidate Info
years in workforce
years at this job
Structural Design Engineer
ArtiosCAD folding carton designs on (Kongsberg & Data Tech Cutting ) Table.
- Responsible for servicing multiple departments: Production, CAD-CAM, Graphics, Sales and Customer Service.
- Built Prototype samples for customer base using Artios CAD Design for Sales and Services.
- Designed packages for the following customers: MC. R. Bard Milton Bradley Games, Hasbro Interactive CD Games, Webster Industries Sandwich and Trash Bags, Marcal Tissue, Eastern Tea Co., Near East Rice, A&P Pasta, America Online and Haviland Candy.
- Increased Productivity through creativity of variations from standard patents and responsible for reproducing samples from design standards for: Reverse Trucks, Autolock Bottoms, Simplex, 1-2-3 (Howland) Bottoms, Collapsible beers and Original Hi-Speed Carton/Packaging Design.
- Created combination of layouts of cartons to be burned by laser for use in production.
- Prepared coating blankets for the printing press for production use.
- Developed and implemented purchasing flow-chart of laser dies burning.
- Contributed to ISO9001 documentation and audit process.
Candidate Info
years in workforce
months at this job
Civil Engineering Technology
Structural Design Engineer Intern in Advanced Aircraft Program
- Created a searchable database for employees to reference in-flux models in Catia v5 with older design models to boost design time
- Aided employees in fastener placement throughout models in Catia v5
- Prepared presentations in a direct and timely manner
- Generated presentations for upper management to identify of long lead time hardware
- Compiled long lead hardware into a database visual to all in the Advanced Aircraft Program
- Established a working relationship with co-workers in my division
- Attained certificate to design using Catia v5 with SmarTeam through a two week training course
Candidate Info
years in workforce
years at this job
Civil Engineering
Industrial And Systems Engineering
Civil/structural Design Engineer
Designed new foundations and steel platforms for heavy equipment such as pressured vessels, compressors, heat exchangers, Power distribution center, Tanks, etc in accordance with CBC, ASCE7-05, ACI-318, AISC 13th, and API 650 at ConocoPhillips, ExxonMobil, Tesoro, Valero, AERA energy, OXY, and Warren E&P facilities
- Coordinated with piping engineers and designers to design pipe supports
- Provided calculations and drawings for all civil/structural projects
- Analyzed and retrofitted existing structures to meet the current seismic code requirements
- Obtained building permits for all projects from the City of LA
Candidate Info
years in workforce
years at this job
Structural Engineering
Structural Design Engineer
Structural design from concept phase to construction documents
- Inspected structural designs, drawings and details
- Provided AutoCAD drawings and details for reinforced concrete and steel constructions
- Structural design for new buildings, reconstructions and reparations
- Directly coordinated with other disciplines (architecture, mechanical etc)
Candidate Info
years in workforce
years at this job
Structural Design Engineer
Performs structural analysis of new and existing wireless structures and structural components.
- Performs detailed structural reports with engineering recommendations.
- Prepares and reviews complete design documents as the Engineer of Record.
- Develops typical design sheets and 3D structural models for improved efficiency of analysis & design.
Candidate Info
years in workforce
years at this job
Structural Engineering
Design Of Foundations For Dynamic Loads
Structural Design Engineer
Designed wind turbine generator gravity base, rock anchor, deep pile, and other proprietary foundations using hand calculations and finite element analysis.
- Obtained Department of Energy security clearance on National Renewable Energy Laboratories for the wind test center.
- Designed substation foundations, bridges, roads, culverts, large retaining walls, transformer foundations and O&M buildings.
- Prepared written specifications, reviewed shop drawings and coordinated redlines with CAD staff, provided many field inspections and offered field engineering solutions.
Candidate Info
years in workforce
months at this job
Mechanical Engineering
Structural Design Engineer - 767 Aerial Refueling Tanker
Responsible for engineering design, integration and modification of 767 Lower Panel Assy on Catia V5.
- Modified the 767 lower panel assembly to increase the cargo capacity to support the fuel tanks on board.
- Managed Lower Panel concept layouts, generate concept layout into assemblies and installation forms.
- Designed machined parts, frame, shear tie, frame fitting, stringer, stringer fitting, stanchions
- Designed sheet metal parts for frame splices, tear straps, intercostals using sheet metal design
Candidate Info
months in workforce
months at this job
Civil And Environmental Engineering
Structural Design Engineer
Developed structural design solutions as well as modifying existing designs to accommodate the unique architectural characteristics of the mobile home.
- Coordinated with multiple disciplines to compete against 20 different teams worldwide.
- Won 2nd place for the overall Solar Decathlon competition.
- Autodesk Revit
- Autodesk Robot Structural Analysis
- ESRI ArcGIS
- Microsoft Office (Word, Excel, PowerPoint, Outlook)
Candidate Info
years in workforce
years at this job
Structural Engineering
Earthquake Engineering
Civil Engineering
Structural Design Engineer
- Performed structural design calculations for concrete, steel, wood, and masonry structures
- Reviewed complex architectural, mechanical, electrical, plumbing, landscape and civil drawings, also material test and soil reports to obtain information for structural design
- Developed structural sketches and coordinated with team of drafters to produce the structural drawing packages
- Responded to plan check comments to obtain the project permit
- Reviewed shop drawings and responded to Requests For Information by contractors of various disciplines
Candidate Info
years in workforce
years at this job
Mechanical Engineering
Design Project
Structural Design Engineer
Proficient with 2D and 3D GD&T and design principles as well as updating blueprint definition to 3D MBD
- Providing rapid response EO and DCN changes to support 24/7 shop floor functionality
- Designing new, innovative products supporting aircraft including the F-15 fighter and the CCTS-100 space capsule
- Updating older F-15 models with retrofit packages including products made from groundbreaking manufacturing technologies
- Interfacing with multiple departments including Strength, Manufacturing, Dynamics, Tooling, and Procurement to achieve the most effective, cost efficient, and timely engineered products
- Collaborating with other Boeing sites and internationally located partners to satisfy demanding government customers
Candidate Info
year in workforce
year at this job
Civil Engineering
Civil Engineering
Civil Engineering, Structural
Structural Design Engineer
Designed steel and concrete structures and foundations using SAP2000, ETABS and SAFE based on AISC and ACI codes
- Prepared required design documents
- Prepared AutoCAD drawings
- Performed finite element analysis on different structures
- Designed different types of connection in steel structures
Candidate Info
year in workforce
year at this job
Civil Engineering
Civil Engineering
Civil Engineering, Structural
Structural Design Engineer
Designed steel and concrete structures and foundations using SAP2000, ETABS and SAFE based on AISC and ACI codes
- Prepared required design documents
- Prepared AutoCAD drawings
- Performed finite element analysis on different structures
- Designed different types of connection in steel structures
Candidate Info
years in workforce
years at this job
Civil Engineering
Civil Structural Engineering
Structural Design Engineer (department Head )
- Effectively managed and coordinated Physical Planning and Maintenance units.
- Responsible for structural designs & analysis, construction inspection of different building projects.
- Effectively supervised large capital building projects, monitored and analyzed construction progress.
- Prepared preliminary feasibility studies and final cost estimates used in evaluating bids.
- Checked and approved interim and completion payment certificates.
- Performed cost analysis, site review and documentation; Prepared the drafting work.
- Prepared monthly progress reports, completion reports, and as-built drawings.
Candidate Info
years in workforce
years at this job
Civil Engineering
Finance
Civil Engineering
Senior Structural Design Engineer
- Designed concrete/metal buildings according to British and Singaporean standards, from simple projects such as warehouses to complicated projects such as high-rise buildings, hospitals.
- Achieved team objectives and goals in support of departmental expectations on time and within budget.
- Worked closely with Engineers, Technicians, Project Managers, Screeners and Quoter. Offered technical solutions using structural analysis knowledge, codes and specifications.
- Provided assistance to Builders for design change orders and solved issues on construction fields.
- Checked/approved structural analysis & drawings submitted by contractors
- Performed evaluation of contractor bids and claims
Structural Design Engineer Resume Success Stories
