- Featured in:
-
High Quality
The best examples from thousands of real-world resumes
Expert Approved
Handpicked by resume experts based on rigorous standards
Diverse Examples
Tailored for various backgrounds and experience levels
Cad Draftsman Resume Samples
No results found
Candidate Info
years in workforce
years at this job
CAD Draftsman
875 million program for the United States Postal Service's Flats sequence Sorting (FSS) system.
- Supported Training department by converting and re-organizing existing engineering documentation into suitable training documentation.
- Created and updated AutoCAD drawings from engineering sketches and parts lists, including cable assemblies, circuit card assemblies, components, schematics, and wiring diagrams.
- Detailed and updated Inventor Models utilizing program standards and formats.
- Created and maintained system and sub-system level Visio drawings detailing cable and wire interconnections utilizing various sources, including site survey data, hardware, equipment lists, and engineering input.
- Supported engineering team with functional illustrations for program support documentation.
Candidate Info
years in workforce
years at this job
Design Drafting Program
CAD Draftsman and Project Manager
Responsible for constructing CAD drawings based on information provided by client, architect, and engineer.
- Prepared plans for submittal, coordinated engineering, bidding and estimating.
- Provided design drawings for clients and architects while also providing production drawings for manufacture.
- Called upon to create custom storefront and panel wall systems to withstand proper wind loads, dead loads, and snow loads while maintaining intended aesthetic value.
- Provided scheduling of every project phase from start to finish.
- Produced optimized material reports to lessen waste and increase profit value.
Candidate Info
years in workforce
months at this job
Graphic Communication Systems And Technology
CAD Draftsman
Developed and modified mechanical and plumbing drawings from copied floor plans for pipe system installation and fabrication using an enhanced 3D CAD software
- Worked as team member in spooling department creating 3D detailed layouts of pipe systems
- Prepared informative packages including dimensions, material characteristics, customer request, etc. for fabrication shop and field workers
- Communicated with field workers, Engineers, and customers to confirm quality drawings and project details.
Candidate Info
years in workforce
years at this job
Philosophy And Music
CAD Draftsman, Receptionist
Produced time sensitive layouts and created drawings, under supervision of design engineer, using AutoCAD software.
- Distributed drawings to General Foreman to begin construction and/or installation projects.
- Maintained regular contact with General Contractor and General Foreman for updates and revisions to diagrams and construction drawings.
- Created and submitted "as-built" drawings to engineer at project completion.
- Answered phone calls, filed, delivered materials and drawings to construction sites.
Candidate Info
years in workforce
years at this job
Transfer Studies
Geographical Information Systems
Mathematics, Chemistry, Physics And Economics
CAD Draftsman/gis Technician
Provided CAD assistance to civil and environmental engineers and stream restoration specialists
- Developed and organized job and sheet sets; drew proposed work and details from engineer sketches
- Creatively produced comprehensive design plans, including pipe/drainage profiles with existing and proposed grades
- Organized and tracked environmental impact during planning and construction of MD200 Intercounty Connector
- Provided coworkers with Microstation and AutoCAD support and troubleshooting
- Provided support for GIS, ArcInfo and ArcView
- Organized and created geodatabases from shapefiles tables; developed maps for field technicians in collection of stormwater facilities
- Convert GIS data into CAD data to be used in the creation of plan sheets
Candidate Info
years in workforce
years at this job
CAD Draftsman/lead Coordinator
Developed 2D and 3D CAD models with help of NAVIS
- Coordinated with manufacturing teams and determined assemblies
- Assisted Engineering and Design departments
- Established rapport and maintained communication with multiple contractors/vendors
- Ensured submissions for projects were completed on time and within budget
- Assisted with coordination of task involving third party vendors
- Monitored project activities and advised staff on resource availabilities
- Coordinated with Engineering Manager for project scheduling
Candidate Info
years in workforce
years at this job
Architectural Engineering Technology
Cad Draftsman
- Produced full sets of Architectural Construction Documents for a variety of projects using AutoCAD 2009.
- Coordinated Architectural and Structural Drawings to produce Shop Drawings for field personnel.
- Provided "Design Assist" to Architects as needed to complete construction documents.
- Produced highly detailed interior shop drawings, allowing field personnel to build with minimum RFI's or work stoppage.
Candidate Info
years in workforce
years at this job
Certificate
Engineering, Mechanical
Mechanical
CAD Draftsman
Promoted to draftsman from circuit board repair technician.
- Auto CAD 14 Detailing, 3D modeling and layout in the Mechanical Engineering Department.
- Developed and designed display monitor lock mechanism for Automated Manufacturing System (A, M, S) with Manufacturer Engineer that Implemented efficiency of PC board Assemble production line.
- Complete Engineering Changing Order (E, C, O).
Candidate Info
years in workforce
years at this job
Elementary Education
CAD Draftsman
An Architectural design firm specializing in Hospitality (hotels), commercial office buildings and large multi-family residences, typically student housing.
- Produced complete architectural design/drawing packages, from preliminary design thru construction documents, based on architects sketches and mark-ups.
- Created as-built drawings or used our existing plans for space planning and tenant build outs for our commercial clients.
- Created our CAD drawing standards.
- Improved efficiency of drafting department by developing and maintaining our standard details library.
Candidate Info
years in workforce
years at this job
Administration
Computer Aided Drafting And Design
Us Navy First Line Leadership
CAD Draftsman
- Conducted physical site surveys of existing buildings and utilities for current and future electrical design modifications.
- Drafted and modified electrical floor plans based on engineers’ designs for commercial and military utilization.
- Oversaw the completion of received redlined drawings from sub-contractors and incorporated into as-built drawings.
- Interpret blueprints & project drawings
- Provided Quality Assurance Reviews of drawing deliverables prior to forwarding to clients.
Candidate Info
years in workforce
years at this job
Drafting And Design
CAD Draftsman III
Lead CAD Coordinator on all major projects in market segment. Projects included runway rehabilitations and extensions, taxiway rehabilitations and additions, aircraft apron additions and rehabilitations, terminal expansions and rehabilitations.
- Projects required updating of airport base maps with new survey data for project and as built conditions at project closeout, creation of all sheets in drawing set including front end, existing conditions, demolition, construction, grading, marking, and all associated detail sheets.
- Created and managed project base xrefs for each series of drawing set.
- Collaborated directly with design engineers on creation of paving, grading, drainage, and E&S design xrefs.
- Held major role in the revising and updating of company corporate CAD Standard.
- Wrote Manual for and designed CAD Standard Template for Denver International Airport to incorporate new FAA requirements for GIS data collection.
- Actively followed and practiced use of latest FAA required standards and guidelines including training of engineering and CAD staff on new standards as related to project plans and CAD files.
Candidate Info
years in workforce
years at this job
Auto CAD Draftsman/warehouse Supervisor/computer Technician
- Utilizing AutoCAD for all layouts of custom designed kitchens, baths and fireplaces. Conferred with client in order to determine architectural preferences and interior designs were exactly what the client envisioned.
- Structured and maintained customer files to attain accuracy time sensitive installations. Created itemized price listings that included labor, material and custom design work.
- Custom built office computers and performed maintenance as needed with updates.
- Duties included contacting all vendors and negotiating prices for materials needed.
- Ordered all company issued tools, metal products, adhesives, granite slabs and propane tanks and heating fuel needed for shipping and warehouse.
- Resolved major problems with PC software and/or hardware issues while demonstrating to office personnel how to troubleshoot issues.
- Maintained a very organized and detailed warehouse. Maintained all shop equipment, heaters, forklifts and compressors.
Candidate Info
years in workforce
years at this job
Certificate
Architectural Studies Tech
Interdisciplinary Studies 90 / 30 Public Management
Engineer/cad Draftsman
- Increased experience in compiling and translating hand sketches, renderings, estimates, and verbal information into engineered information utilized to construct exhibits, corporate events, retail fixtures, public advertising, and point of purchase kiosks.
- Established the CAD skills, using CADRA and AutoCAD, necessary for engineering complete construction, assembly, and setup documentation consistently under the estimated hours.
- Gained trust of the engineering manager to check other engineers work, including his own.
- Solidified relationships with production departments by consistently delivering needed information promptly and accurately.
Candidate Info
years in workforce
year at this job
Applied Science And Engineering
CAD Draftsman/designer
Accountable for general drafting design mark up/revision of existing drawings and data base management
- Duties include Structural and civil drafting, 3-D modeling and floor plan lay-out for commercial applications
- Developed and maintained lucrative relationships with in-house engineers and external clients
- Met with clients in office or in the field to represent the company on various projects
- Prepared charts, graphs, and sketches for commercial applications
Candidate Info
years in workforce
years at this job
Engineering Graphics
Mechanical Engineering CAD Draftsman
- Documented mechanical components of industrial laundry machinery in 3-D using Unigraphics CAD system.
- Implemented new product drawings and maintained existing drawings of material handling equipment such as extractors and press machinery.
- Researched experimental prototypes for mechanical components and recommended manufacturing processes for use in production.
- Worked effectively with quality and manufacturing personnel to resolve and correct inconsistencies with design dimensions.
Candidate Info
years in workforce
years at this job
Engineering
Mechanical Engineering
Cad Draftsman and Product Designer
- Administered improvement of existing product resulting in significant cost saving.
- Processed ECN and ECR changes and updated As400 system to reflect current revisions.
- Managed test lab workload.
- Administered R&D test and wrote formal reports.
- Built Prototypes and special components.
- Read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Candidate Info
years in workforce
years at this job
CAD Draftsman
Responsibilities included drafting and data collection.
- Created base plan drawings for traffic signal plans.
- Assisted engineers in data collection required for developing traffic studies.
- Reviewed traffic signal plans prior to submittal, and corrected plans as necessary.
Candidate Info
years in workforce
month at this job
Architectural Engineering Technology
Information Technology Systems Administration
CAD Draftsman - Mechanical/electrical/piping
Primary duties involve drawing mark-up, change management, drawing tracking, and reconciliation to client standards. Example tasks included:
- Drew mark-up using AutoCAD 2007
- Drew Process Piping, HVAC and Electrical plans, sections and details
- Consulted with designer/engineer to prevent conflicts as final engineering product is prepared
- Consulted engineering for large Purdue fire protection contract
- Managed drawing history for projects
Candidate Info
years in workforce
years at this job
CAD Draftsman
- Produced a variety of utility, design, mechanical, and electrical drawings depicting intellectual property matter and applications.
- Created numerous drawings using photography, scanning, outlining and free-hand.
- Adhered to the rules of practice relating to drawings as outlined by the U.S. Patent and Trademark Office.
- Communicated directly with clients in matters of additions and revisions to drawing files. Produced drawings for approximately 40 intellectual property clients.
- Responsible for receiving and docketing new projects as well as setting up and maintaining network file structure for all related drawing files.
Candidate Info
years in workforce
years at this job
Computer Aided Drafting
Business Administration
CAD Draftsman
Provided CAD support for a new chemical manufacturing plant in Shanghai, China.
- Produced P&ID's per engineer's request.
- Provided architectural drawings for the site and occupancy.
- Managed logs documenting the drawings & documentation contained for the project using Microsoft Excel.
- Managed all drawings for the project.
- Provided CAD support for domestic and international [company name] facilities.
- Developed a CAD standard for all P&ID symbols.
Candidate Info
years in workforce
years at this job
Computer Aided Drafting
CAD Draftsman
Provided CAD support for a new chemical manufacturing plant in Shanghai, China.
- Produced P&ID's per engineer's request.
- Provided architectural drawings for the site and occupancy.
- Managed logs documenting the drawings & documentation contained for the project using Microsoft Excel.
- Managed all drawings for the project.
- Provided CAD support for domestic and international [company name] facilities.
- Developed a CAD standard for all P&ID symbols.
Candidate Info
years in workforce
years at this job
Information Systems
CAD Draftsman
Handled customer inquiries
- Wrote legal descriptions for surveys
- Designed a subdivision
- Assisted survey crews
- Created invoices from the general ledger
Candidate Info
years in workforce
years at this job
CAD Draftsman
Create and maintain models and spec sheets for the production floor in the Product Development group
- Managed extrusion weight sheet used with SAP to ensure product integrity and track product usage
- Convert hundreds of CAD drawings to SolidWorks models and drawings for production
- Developed assembly templates to streamline Auto CAD to SolidWorks conversion
- Set up SolidWorks program to auto-calculate board lengths for complex packaging design
- Wrote Excel program to auto-calculate weight capacity for various crate sizes
- Set up SolidWorks program to auto-calculate degree of slope for various fence assemblies
- Modeled various parts and assemblies from written and/or verbal descriptions
Candidate Info
years in workforce
years at this job
High School Diploma
Cad Drafting And Tool Design
CAD Draftsman
Created all user manual illustrations that demonstrated how to assemble our products (boat lifts, docks
etc).
- Designed basic drill and welding jig fixtures
- Created construction documents for in house fabrication.
- Occasionally worked on shop floor running presses and assembling products
Candidate Info
years in workforce
years at this job
Mathematical Sciences
CAD Draftsman
- Created and modified CAD drawings for Civil Engineering projects
- Accompanied Engineering and Construction crews to work sites, took field measurements
- Greatly expanded knowledge of Civil and Environmental Engineering & Design
Candidate Info
years in workforce
years at this job
Liberal Arts
CAD Draftsman/designer
CAD designer of spec homes and contract homes using AutoCad and Softplan.
- Designed all homes for eight (8) subdivisions developed in Metro Atlanta area.
- Designed multiple subdivision logos.
- Produced site plans for each subdivision.
- Tasked with obtaining permits for houses in all subdivisions.
- Designer of marketing materials for The Knight Group's Real Estate company.
- Manager of company's cell phone contract with local wireless company.
Candidate Info
year in workforce
year at this job
Cad Draftsman
Created drawings to incorporate up-grades and design changes.
- Created assembly drawings.
- Produced 3D "wblock" wireframes to be used by other department Engineers and Designers.
- Produced illustrations for ISO 9000 documentation.
Candidate Info
years in workforce
years at this job
Drafting / Design
Electrical Engineering
Engineering
CAD Draftsman
Responsible for building CAD drawings based on information provided by customers and engineers. Prepared plans, coordinated, and assigned drafting teams.
- Provided technical expertise and guidance in preparation and architecture of efficient datasets, layouts, work statements, drawings and delivery schedules.
- Mentor CAD and drafting guidance to junior operators.
- Provided design review, revisions and improvements in coordination with the engineering teams.
- Worked with prominent clientele on electrical schematic drawings.
- On Site Senior Field experience with wiring, configuration and testing.
- Built, wired and designed configurations for high voltage control panels, operator stations and operator desks for industrial sized factories.
Candidate Info
years in workforce
years at this job
Graphic Design
Architecture
Cad Draftsman
- Created new drawings based upon engineers' sketches of structural and MEP building plans, sections, and details using AutoCAD or Microstation. Structural projects were mostly small to medium scale involving steel, wood, and concrete.
- Used CAD to "redraw" previous designs on old blueprints or scans.
- Revised design drawings and shop drawings. Measured existing spaces and noting the location of electrical outlets, openings, etc to be used as a reference for new work.
Candidate Info
years in workforce
years at this job
Drafting / Design
CAD Draftsman
Responsible for preparing CAD drawings based on information provided by Architects and Engineers.
- Civil drafting experience consists of laying out site plans, grading and drainage plans, erosion control plans, utility plans and site details by using MicroStation V8i.
- Structural drafting experience consists of laying out foundation framing plans, floor framing plans, roof framing plans, concrete details and steel details by using AutoCAD 2012.
- On-site observation reporting for general contractor and engineers.
- Strong organizational skills and meticulous attention to detail.
Candidate Info
years in workforce
years at this job
CAD Draftsman / Office Assistant
Answering customer inquiries, Preparing and submitting quotes to customers via fax & email
- Inputting accounting information into Quickbooks, Preparing and making bank deposits
- Drafted parts from customer supplied prints to CAD/CAM software to post to CNC machines
- Inspection of finished parts before shipping to customers
Candidate Info
years in workforce
years at this job
CAD Draftsman
- Responsible for the architectural style drafting on all existing and proposed projects. Worked closely with Development on the layout of proposed malls and shopping centers
- Lead draftsmen involved in all exhibits, constraints plans, sketches, lease plans and site plans for the Leasing Department.
- Lead drafter and coordinator for the CAD group on many development projects
- Involved in management processes that improved the operation and capacity of the CAD department.
Candidate Info
years in workforce
years at this job
Graphic User Interface Design / CAD Draftsman
Lead graphic designer and CAD draftsman
- Liaised with engineering department to meet customer specifications
- Initialized and commissioned computer controlled HVAC systems
- Educated customers on HVAC control systems and interfaces
- Updated as-built drawings, redlines, and detailed engineer's sketches/designs
Candidate Info
years in workforce
year at this job
Mechanical Engineering
CAD Draftsman
Designed and drafted bleachers, grandstands, and stadiums using AutoCAD
- Coordinated with salesmen on creating drawings as per customers' requests
- Interrupted architectural drawings and topographic maps in order to create accurate drawings
- Managed several different projects at a single time.
Candidate Info
years in workforce
year at this job
Graphic Dimensioning And Tolerancing
Engineering Course
CAD Draftsman
Maintain knowledge of the latest AutoCAD, Revit and Navisworks systems
- Layout and/or design electrical systems in accordance with contract documents
- Develop coordination studies working with other trades
- Produce 3D models using the latest information in dimensions, design specifications, materials and quantities
- Develop BIM models to present graphic walk-throughs using Navisworks and Showcase
- Produce construction documents and drawings from BIM/3D models
- Provide bill of materials and schedules from BIM/3D models
- Oversee all plotting equipment, software, connections, maintenance, ordering, and programming
Candidate Info
years in workforce
years at this job
Drafting And Design
CAD Draftsman/ Laser Operator
Create mechanical drawings of Product Utilizing AUTOCAD used to get quotes/sell product/mfg product
- Create CAD/CAM programs to run the 2000w Laser and 3 axis table
- Reverse Engineer existing product into working CAD drawings.
- Read customer drawings and produce product conforming to specified dimensions and tolerances.
- Maintain ISO certification for Laser proformance & maintainance
- Use various measuring tools ( Calipers, Heigth Gauge, Micrometer, Radius/Circumfrance gauges, Pin gauges, Tape measures)
- Create Fixturing and templates for production and manufacturing
Candidate Info
years in workforce
years at this job
Applied Science
Science And Natural Resources
CAD Draftsman/ Landscape Design/ Mason
Utilized AutoCAD & Revit to draft plans for creation, remodeling/revisions & design of various stone, water & plant features
- Designed sketches & used drafting markers for creation of stone, water & plant features for commercial & residential plans
- Translate hand drawn plans into AutoCAD or Revit to create presentable & accurate landscape plans/renderings for clients
- Responsible for selection of proper material depending on the application of masonry work
- Prepare a mixture of concrete and plaster as per the application
- Performed variety of masonry tasks including installation and finishing of concrete block, brick, glass block, sidewalks, retaining walls, decorative rock, water features and plant material
Candidate Info
years in workforce
years at this job
Drafting Design And Cad Technology
High School Diploma
CAD Draftsman / Assistant Project Manager
Became more familiar with Cabinet construction in Dental offices
- Also utilized knowledge in Cabinetry for Veterinary Offices
- Utilized AutoCAD 2013LT to carry out Sales and Construction drawings
- Developed knowledge of various dental health care equipment
- Assisted in design and layout of casework for various Dental and Vet Offices
- Worked with various salesman to facilitate Dental and Vet Cabinetry needs
- Designed various reception desks and check writers
- Involved in color and material selection of Cabinetry and Check writers
Candidate Info
years in workforce
years at this job
Computer And Internetworking Technology
Technology
Computer Aid Drafting
CAD Draftsman/desktop Support Technician
Prepare drawing to indicate permits for multiple city requirements, Cook, DuPage, Kane, Kendall, Lake, Will Counties, and Illinois Department of Transportation
- Design aerial and underground routes to meet city and township requirements, as well as county and state specifications
- Using Google Earth, prepare drawings to indicate all utility locations to the permit drawings In partnership with Joint Utility Locating Information for Excavators (J.U.L.I.E.)
- Work closely with city utility department, Nicor Gas, Meade Electric Company, and United States Infrastructure Corporation (USIC)
- Collaborate with Joint Utility Locating Information for Excavators (J.U.L.I.E.) and United States Infrastructure Corporation (USIC) to assure accurate city specifications
- Configured and installed new desktop systems
- Troubleshoot and resolved hardware and software problems
Candidate Info
years in workforce
years at this job
Design Technology
Computer Science
Engineering Department / CAD Draftsman /lead Releaser
Create Bill of Material list and post sketches for construction of hand railing systems.
- Create detail drawings of hand railing components and location using AutoCAD.
- Coordinate with field personnel in the installation of handrail.
- Coordinate with Engineer and Job Superintendent to ensure that railing is installed per specifications.
- Created several MS Office Macros and Spreadsheets to optimize the time spent on projects.
- Created multiple AutoCAD Menus and Blocks to reduce time spent on detailing of jobs.
Candidate Info
years in workforce
years at this job
Inside Sales/cad Draftsman
Managed the ordering and fabrication of structural steel at a steel service center for an international grocery/retail store chain
- Detailed CAD drawing on a daily basis for "Cut to shape" steel plate
- AutoCAD 2008 & ProNest 2010
- 6 months experience running a Controlled Automation plasma/torch table before moving into the main at Ellis Steel, West Point MS (parent company of [company name])
Candidate Info
years in workforce
years at this job
Cad Draftsman / Sheet Metal Worker
Worked in the sheet metal shop for ten years as machine operator, layout person, and welder.
- Three years in the Engineering Department as a CAD Draftsman / Checker.
- Created floor plans and detailed all sheet metal parts required for the buildings.
- Generated field and shop drawings, shippers and BOM's.
- Checked all my drawings and co-worker drawings for errors and redlined any mistakes.
- Fabricated parts per specifications.
- Create nested NC programs to cut parts on punch press.
- Adherence to design standards, customer specifications, and local codes.
- Flat pattern development.
Candidate Info
years in workforce
years at this job
Technology
CAD Draftsman/field Technician
Design specifications for ADOT's erosion and pollution manual
- Southwest Gas Underground Pipeline Field Surveyor
- Hoover Dam SR-85 Storm Water Pollution Prevention Plan/Graphic design
- GIS Digital Flood Insurance Rate Maps
- Certified Asbestos Contractor/Supervisor/Building inspector (AHERA)
- Level I Pipe Radiographer and Level II Magnetic Particle tester (API-1104)
- Fireproofing inspector and Tension Bolt tester
Candidate Info
years in workforce
years at this job
Architectural Systems And Design
Technology Management
CAD Draftsman
After internship was completed the company retained me in a long-term temporary position
- Review and edit CAD drawings for Kawasaki to submit to the New York Transit Authority
- Report problem areas in the drawings to the client
- Communicate with Kawasaki (client) and make specified revisions to drawings
- Assist architectural firm clients in plotting their drawings to specifications
Candidate Info
year in workforce
year at this job
Architectural Technology
Architectural Studies
Appraisal Principles
Cad Draftsman
- Offered design ideas and solutions for sealed solar roof system on residential house.
- Generated Google Sketchup Models of a sealed solar roof system on residential house and drafted details of roof system connections.
- Drafted various side projects including, a car-mounted turbine, and magnetic engine.
- Filled and cleaned vending machines when help was needed.
Candidate Info
years in workforce
year at this job
Certificate
Certificate
Associate of Applied Science
Plumbing Designer / Cad Draftsman
Responsible for prompt production of all drafting material in an extremely confidential and deadline oriented environment working with AutoCAD 2007.
- Design and drafting of plumbing systems (Cleveland State University, Cleveland Clinic and University Hospital Additions)
- Interfaced extensively with building owners, Architects and construction managers to meet extremely time sensitive mechanical drafting deadlines.
- HVAC / Electrical Drafting & Plumbing Design. Update As-Built Drawings as required.
- Update As-Built Drawings as required.
Candidate Info
years in workforce
years at this job
High School Diploma
Architectural Drafting & Cad Technology
Designer/cad Draftsman
- Oversaw residential and commercial projects from conception to completion, interpreted client's visions
- Created full working sets of drawings with architectural and building code consideration and worked closely with builders throughout all phases of construction
- Redlined full sets of building plans for code, technical issues as well as lifestyle adaptation or inaccuracies
- 3D model building experience, created physical and virtual scale architectural models of projects
- Rendered project designs using computer imaging and using pencil/ink
- In-house computer support & troubleshooter
- Trained new employees to company standards, taught advanced CAD, and construction techniques
Candidate Info
years in workforce
months at this job
Certificate
Computer-aided Design And Technology
Industrial Technology
Sr. CAD Draftsman
Used AutoCAD 2014, MicroStation V8i (SELECT series 2)
- Worked on drawings for the electrical layout and wiring for natural gas pumping stations.
- Worked on site drawing to locate new electric pole locations and removal location of old poles.
- Designed standard format for new pole detail drawings.
- Made pole detail drawings for client, NIPSCO, showing height, components and anchoring details.
- As built drawings for customer archives.
Cad Draftsman Resume Success Stories
