- Featured in:
Find out what is the best resume for you in our Ultimate Resume Format Guide.
Additional Architecture Resume Samples
Autocad Operator Resume Samples
No results found
0-5 years of experience
Provide Computer Aided Drafting services several architects and various designers.
- Drafted detailed construction drawings, site surveying that involved taking measurements to create floor plans, creating building elevations and cross-sections, assessing fit and finishes for contractors bid packages.
- Reviewed rough sketches, red mark drawings, specifications, and other engineering data received from architects or designers.
- Took plans to Labor & Industry for preliminary and/or final review.
- Performed other duties as described under drafter. Interacting with clients, delivering drawings and helping answering phones.
0-5 years of experience
Prepared AutoCAD base sheets for designers using combination of surveys ( both electronic and hard copy ) and field measured information
- Managed computer aided designing for the clients
- Ensured quality work to meet organization’s expectations
- Ensured accuracy and best practices of the designed product for the organization
- Generated 2D and 3D models and drawings
- Done other responsibilities as assigned
0-5 years of experience
Architectural Concrete manufactures cast stone products for use in commercial and residential buildings.
- Consistently produced exceptional quality design work, estimates, and take-offs.
- Designed and drafted architectural detailing of masonry items with AutoCAD 2009.
- Produced customer approval drawings and in-house shop drawings for production.
6-10 years of experience
- Assisted Engineering with research and detail drawings in AutoCAD (Rel. 14 & 2000) per ASME ANSI Y14.5M standard along with maintaining records and correspondence.
- Collected data from created drawings involved in machine parts, sheet metal, wiring diagrams and assembly given by the Engineering Department for MRI medical system.
- Revised and updated drawings for ECO generate by Engineering.
- Responsible for specification parts (Mechanical, electrical and pneumatics supplied by the Engineering and Vendors) inputting into Microsoft Excel to generate specification sheets.
- Input and output on all drawings in the Blueprint room.
0-5 years of experience
Provided CAD drafting support and assistance at various clients’ office locations.
- Developed detailed figures and layout drawings for a wide range of projects.
- Updated client’s existing drawings and plans based on new design revisions and criteria.
- Prepared drawings according to established standards, procedures and requirements.
- Worked and collaborated with project engineers and client staff to better meet project needs.
0-5 years of experience
Technipower is nationwide company skillfully staffing a diverse group of individuals as desired.
- Drafted 3D models using AutoCAD (2007).
- Utilization of external reference to modify Architectural Floor Plans via red lining/markups.
- Completed Architectural Drafting, Mechanical Drafting, & Electrical Drafting techniques.
- Reviewed schematics and blueprints, for industry standard practices.
6-10 years of experience
I was hired by Indus and placed on DOD contract supporting telecommunications upgrades at various military bases and government facilities.
- Provided complete building or campus telecommunications structured cabling drawing package.
- Provided site survey and final telecommunications implementation drawings for various military bases.
- Implemented custom AutoCAD practices to promote drafting efficiency, and access and portability of the design drawings in AutoCAD 2004 format.
- Setup new CAD/Design department to assist field installation teams.
- Assisted installation team in the field by helping pull cable, 66 block punch down, RJ-45 WAO punch down at various sites.
- Have prepared the following types of drawings – site plans, manhole/hand hole drawings, cable duct drawings, floor plan drawings, room details drawings, cabinet elevation drawings, equipment panel detail drawings, backbone/horizontal/cross connect cabling drawing, electrical/hvac drawings and drop location drawings etc.
- Worked on large project with ISEC Engineers of outside plant identification of manholes using GPS coordinates transmitted from the install team in Saudi Arabia.
- Created outside plant Site Drawings, Manhole drawings, and telecom room drawings
0-5 years of experience
Created assembly drawings, including bill of materials and detail drawings, from field sketches for the design of replacement parts for Coal mine equipment.
- Prepared all electrical and hydraulic schematic drawings for mine equipment including manifold and hydraulic cylinder design.
- Redesigned gathering pans and conveyor booms, and created the layout and detail for retro fitting new applications.
- Nested all parts that needed to be CNC torch burnt using Pronest CNC software and coordinated work cards to get the work completed.
- Quoted new equipment and ordered all steel.
- Coordinated and ordered all parts produced by outside vendors
- Coordinated and directed both fabrication and machine shop to meet customer needs and time deadlines.
- Coordinated delivery time directly with customer to assure on time delivery
0-5 years of experience
Coordinated, conducted and set-up meetings for customers and vendors according to their availability
- Provided customers with accurate quotes and proposals to gain and maintain their business
- Ensured deadlines were met within time frames that were set along with managing 1-2 subcontractors weekly
- Oversaw the completion of projects to guarantee customer satisfaction
0-5 years of experience
Managed large scale projects and interpreted clients needs into design and development
- Worked closely with lead Architects, Engineers, and Contractors on various Commercial and Residential projects
- Met on a regular basis with clients as needed
- Collected background information and documentation including “as-built” data, as necessary
- Coordinated with Architectural and Engineering staff regarding building design and development
- Maintained up-to-date knowledge of Florida Building Code and International Building Code
0-5 years of experience
- Created, edited, and maintained engineering/architectural drawings utilizing AutoCAD
- Ensured that designs are accurate and complete as determined by the project manager
- Managed and prioritized drawing requests to meet all deadlines on time
- Detected potential problems to prevent error and delay of project completion
- Standardized new template designs to drive revenue with new and existing customers
0-5 years of experience
- Installed, pulled wire, labeled and troubleshot various audio visual equipment based on CAD drawings.
- Service Asset- Assisted clients with presentations on their laptops, Assisted in production for large meetings and webcast events by operating camera controls, microphone audio and display /content switching.
- Oversaw Rack Fabrication department, assembled racks with AV equipment, ordered supplies, inventoried parts, soldered connectors and coordinated with project managers on timelines and expectations.
- Composed drawings from a job jacket containing a scope of work, sales flows, equipment list for conference rooms, auditoriums, NOC’s, museums and other operating centers.
- Maintaining the Design department training and resource library as well as creating standards for department structure and organization.
- Collected drafted sets of drawings with markings /corrections from the field and changing them in CAD for an accurate depiction of onsite installation for PDF and republish.
0-5 years of experience
Responsible for the overall operation of the permitting functions of the Planning and Community Development Department
- Coordinated with engineers and State for permit approvals
- Established and implemented long range goals for the Department in accordance with State and federal laws and County codes
- Developed and maintained client relationship for permit submittal
- Prepared the design and submittal of Construction and Zoning drawings for county and client approval
- Designed lease exhibits for preliminary new builds
- Implemented survey data provided from site walks
- Revisions made to drawing templates and details for final submittals to Telecommunication customers
- Assisted Structural Engineers with the design of structural plans and details
- Actively led in the training of new hires to insure drafting standards and protocol
- Implemented drafting guidelines for employee manual
0-5 years of experience
Prepared final installation drawings for heated cables, both residential 20 and commercial
- Mapped out cables to provide uniform heating 20 pattern
- Revised existing drawings to match site changes and building conditions
- Assisted Engineering Department in production of custom contactor boxes, soldering, and ordering parts
0-5 years of experience
Leading New Jersey and Florida full service interior/exterior design center as featured in Design New Jersey magazine.
- Created AutoCAD line drawings of designer’s sketches for interior furniture and cabinet layouts.
- Created AutoCAD architectural framing shell floor plans, elevations and cross sections if needed.
- Create 3D renderings of proposed rooms, cabinets and structures when needed.
- Revise architectural plans to conform to changes proposed by designer.
- Maintained internal computer network and file management.
- Maintained PC’s and peripherals.
0-5 years of experience
- Drew sketches to accurate scale showing relation of proposed installations to existing facilities and exact specifications and dimensions.
- Interpreted drawing markups and implemented drawing revisions provided by engineers.
- Created assembly and layout drawings using AutoCAD 2002 technology.
0-5 years of experience
- CADD Drawing Reconciliation Phase II Project (Responsibilities included reconciling duplicate drawing files, updated view ports, borders, title block, fonts and layouts to current standards.)
- CADD Flow Diagram for Facilities Creation (Responsibilities included updating flow diagram drawings per field mark-up.)
- Autodesk Inventor 2009 (3D Inventor training for mapping pipeline facilities in 3D.)
- Tank Data Reconciliation (Responsibilities included reconciling general tank data from asset integrity data, DMS data and on site file system. Performed on site scanning of tank data files at Greensboro Tank Farm.)
- Modified Facility Drawings for Booth (Responsibilities included updating various mechanical drawings per mark-up.)
- Gas System Relocations (Responsibilities included routing existing and proposed gas pipelines systems within DOT right of way.)
- Created Gas Distribution Systems Maps for Due Diligence (Responsibilities included coordinating and managing project with client, digitizing roads, buildings, existing gas pipeline from raster file, adding meters, regulators, valves, labeling pipe size, length, ties, GPS coordinate for master meter location and routing proposed gas pipeline.)
0-5 years of experience
- Proficient in reading & understanding architectural and electrical contract drawings and specifications.
- Add electrical symbols, annotations and notes to architectural drawings.
- Collaborate with Project Managers and clients to ensure detailed engineering of 3D and 2D drawings.
- Interpret hand-drawn plans from architects and engineers from multiple disciplines (i.e., architectural, civil, mechanical, electrical) and use AutoCAD to create presentable and accurate facility and infrastructure plans for concept and statement of work requirements for project execution.
- Review plans to determine what information must be incorporated into new plans to update information.
- Interact affectively with architects, engineers, and designers to quickly and accurately update/correct or produce drawings during the design and construction process.
0-5 years of experience
Created AutoCAD drawings for high-end residential projects regarding architectural millwork, from field measurement to completion.
- Researched and implied appliances, hardware and lights specifications.
- Attended jobsite meetings with Owner, Architect, Contractor etc. and followed up with their decisions and mark ups.
- Estimated incoming projects according to design, materials, finishes and quantities.
0-5 years of experience
- Assisted Engineers in developing construction documents for field installations.
- Read and work with P&ID drawings and schematic diagrams.
- Worked with Engineers in the development of conduit drawings, pull schedules, cable cards, & wire tags to develop construction documents.
- Received electronic files from A&E Firms, Mechanical Contractors, and Structural Consultants to develop electrical drawings.
- Developed databases with Filemaker Pro 3 and Microsoft Excel to create cable cards for field routing & wire terminations.
- Created CAD Standards for electrical libraries.
0-5 years of experience
Generate and manage BIM models for 3D trade coordination meetings using NavisWorks
- MEP Design for plumbing and cable trays
- Collect and process various 2D documentation into 3D models for design coordination
- Run interference detection to detect MEP design clashes and provide solutions to design
- Structural: Designed structural elements to 5 SMU Dorm Buildings including Parking Garage and Cafeteria
0-5 years of experience
Compiled development designs for subdivisions.
- Prepared floor plans and elevation drawings for architectural design.
- Conducted field inspections on proposed development plans.
- Utilized all office equipment including blueprint machine.
6-10 years of experience
Designed custom equipment and power supplies for the printing and converting industries
- •Drafted CAD drawings, maintained and filed parts lists
- •Coordinated work flow of project shop drawings within the machine shop
- •Maintained inventory and supervised plant cleanliness
- •Performed R&D projects, resulting in a patent awarded to the company
0-5 years of experience
Reviewed architectural drawings and scope.
- Drafted casework/millwork shop drawing submittals.
- Prepared submittal packages for client.
- Revised submittal drawings per redlines at clients request.
0-5 years of experience
Prepared Conveyor system layout drawings in a warehouse environment.
- Created Mechanical and Electrical bid packages for job quoting.
- Created Mezzanine and Structural Rack drawings.
- Priced Conveyor systems using conveyor vendor supplied software.
- Traveled to on-site installs to debug conveyor system installation.
- Assisted with creation of a dynamic block library in AutoCAD to speed up design time and decrease errors.
0-5 years of experience
- Arch. Refinement & designed fire alarm systems for multiple projects while team oriented using AutoCAD 2008
- Wrote RFI, As-Built, Job walks, designed a riser diagram layout for devices
- Plotted blue prints of finalized projects and sent to city for approvals
0-5 years of experience
Utilize AutoCAD to redesign theaters to comply with ADA standards. These drawings include floor plans, details, and the appropriate data for construction.
- In addition, put together plans for acoustical ceiling, electrical, and lighting layouts for Tenant Improvement Projects.
- Work closely with subcontractors while bidding projects.
- Prepare purchase orders, change orders, and transmittals.
- Responsible for submittals which are sent to architects and engineers for approval.
- Assist Project Managers with daily responsibilities to increase their productivity.
- Revise drawings reviewed by the client and building department.
0-5 years of experience
Participated in on-the-job training and development while performing daily tasks.
- Responsible for revisions and input within AutoCAD.
- Reviewed Riser Diagrams (either visual or audible devices) with accuracy.
- Worked with AutoCAD 2002, Microsoft Excel, and Adobe Photoshop 6.0.
0-5 years of experience
- Drafted mechanical shop drawings using AutoCAD R13.
- Assisted die designer in preliminary design when required.
- In charge of organization of drawing files for projects on company network.