Welding Inspector Resume Samples

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Welding Inspectors check structures like bridges and buildings for welding defects. Typical resume samples for this job mention duties like visiting job sites, conducting inspections, performing tests, updating records, and reporting to management. Based on our collection of example resumes, these experts should demonstrate welding expertise, attention to details, communication skills, report writing abilities, and time management. Problem solving and math skills are crucial. A degree in welding technology and certification are required by most employers.

1

Welding Inspector

Full-time welding inspector for armor repair on MRAP family of armored vehicles while deployed to Afghanistan.

  • Performed battle damage assessments and oversaw repair procedures and upgrades to vehicles.
  • Performed weld testing and conducted MT and PT NDT procedures.
  • Ensured that proprietary written procedures were followed accordingly.
Candidate Info
13
years in
workforce
8
months
at this job
2

Project Lead Welding Inspector

Perform various in-process and final visual inspections during fabrication on welded and bolted connections per AWS D1.1 and AISC requirements.

  • Oversee NDE operations to ensure inspections were being performed at specified hold points.
  • Oversee daily welding operations to verify welders were welding within approved project welding procedures.
  • Performed pre-installation testing and final inspection on bolted fasteners per AISC requirements.
Candidate Info
7
years in
workforce
3
years
at this job
3

Certified Welding Inspector Supervisor

Oversaw a diverse work force and inspected heavy fabrication welding in a high pressure environment.

  • Recruited, interviewed, and selected employees; assigned and checked employees work; evaluated performance, and approved leave.
  • Chaired meetings with employees to inform on policy and procedure changes.
  • Prepared production drawings, and corrected and maintained revised drawings for the engineering group.
  • Helped develop new innovative products, and improvements to existing products.
  • Project manager for the design and development of a steel wheel for mining equipment.
  • Liaison for the engineering of special projects.
  • Taught employees how to weld, certifying welders; operate drill press, shear, punch press, bender; welding; complete layouts; and how to read blueprints.
  • Wrote procedures for IS0 9000 for the engineering group to ensure customers and stakeholder needs were met.
  • Used MicroStation to help engineering with production prints.
  • Used Arc Works to write welding procedures and welder qualifications.
Candidate Info
30
years in
workforce
30
years
at this job
HS
High School Diploma
Technology/electrical Engineering Technology
4

Welding Inspector

[company name] provides qualified inspectors to gas companies and refineries.

  • Test all contract welders to API 1104 and company standards.
  • Ensured all piping is fabricated to the engineer approved drawings and all welds meet the code requirements.
  • Ensure welders use and follow the correct welding procedure for materials being welded.
  • Direct N.D.E. crews to ensure all welds are evaluated using the correct N.D.E. method and create a weld map.
  • Oversee hydrostatic testing to ensure piping is tested to company requirements.
  • Ensure all piping is installed per drawings and the proper pipe supports are used as specified.
  • Ensure all torqueing is performed to company procedures and specifications.
Candidate Info
18
years in
workforce
4
years
at this job
HS
High School Diploma
AS
Applied Science
5

Welding Inspector

Welding Inspector - Non-CWI Inspect all fabrication and welding to ensure weld map drawings are correct

  • Utility Inspector - Inspect all utility work to ensure civil work pipe line right aways are complete prior to contractor beginning job site
  • Painting Inspector - Ensure all sandblasting, painting, and coating work done on equipment/pipe, complete inspection forms
  • Bolting/Torque Inspector - Inspected all flange make up, flange torque, and completed inspection forms
Candidate Info
8
years in
workforce
6
months
at this job
6

Welding Inspector

Hot tap and Hot Tie-in welding inspector on the El Paso/Tennessee Gas Pipeline 317, 319, 319A line 30"

  • Tie-in welding inspector on the El Paso/Tennessee Gas Pipeline 317 line 30"
  • Road bore welding and utility inspector El Paso/Tennessee Gas Pipeline 317 line 30"
  • Firing line welding inspector on the El Paso/Tennessee Gas Pipeline 317 line 30"
  • Tie-in welding inspector on the El Paso/Tennessee Gas Pipeline 319 line 30"
  • Road bore welding and utility inspector El Paso/Tennessee Gas Pipeline 319 line 30"
Candidate Info
18
years in
workforce
7
months
at this job
7

Structural Steel Inspector / Welding Inspector

Inspection of all welded and bolted connections on multi-million dollar construction projects.

  • Ultrasonic examination (shear wave) of column splice and moment welds in accordance with AWS D1.1 and ASNT SNT-TC-1A.
  • Magnetic particle non-destructive examination (NDE) of required welded connections.
  • Certified to Level II in accordance with ASNT SNT-TC-1A in ultrasonic, visual, magnetic particle, and liquid penetrant methods.
  • Reported inspection results in a clear and concise manner in both verbal and electronic formats.
  • Maintained quality documentation files.
Candidate Info
26
years in
workforce
1
year
at this job
HS
High School Diploma
Marine Sciences, Engineering
Non-destructive Testing (nde) And Commercial Diving
8

Quality Control / Welding Inspector

Ensured and checked all the welder joints by inspecting with the required tools and procedures.

  • Assisted in construction coordination in the inspection of various welding units.
  • Performed audits and various pre and post welding procedures.
  • Created weld maps, traceability maps, and as-built drawings using Adobe Acrobat editing software.
  • Built data books and organized logs of welder identification and welding performance per procedures and code.
  • Assisted NACE Certified Inspector with anchor profiles and other Non destructive examination such as holiday testing and adhesion test of coating.
  • Assisted Non Destructive Testing such as Magnetic Particle, Liquid Penetrate, Ultrasonic, Hydrostatic as well as being Level II Visual Inspector.
  • Witness and perform weld audits and inspections for welding qualifications for 3G, 4G and 6GR positions of both structural and pipe welding in SMAW, FCAW, GTAW & GMAW.
Candidate Info
9
years in
workforce
1
year
at this job
Welding Inspection
9

Qa/qc Welding Inspector

Performed testing of products at specific stages to ensure meeting of quality measurements, including dimensions, performance and correct chemical makeup.

  • Inspected welds for quality standards.
  • Rejected inferior products and inferior welds.
  • Read and interpreted engineering documents.
  • Performed statistical analyses using computer models to test conformance to specifications.
  • Worked as a part of the management team to achieve increased productivity while reducing error rates.
Candidate Info
35
years in
workforce
3
years
at this job
10

Certified Welding Inspector

Trained welders in safety and proper required training of electrical welding and procedures. Trained welders in equipment set-up, functions, and safe operations.

  • Trained welders to oversee development of gas transmissions and feed piping.
  • Inspected to applicable codes to develop welding procedures and processes.
  • Documented and handled all regulatory compressed industrial gases.
  • Completed safety operations of gas, electrical and mechanical welding and cutting equipment. Trained in proper handling and storage of filler metals and filler electrodes.
  • Trained in classification and proper filler electrode usage for process compliance.
  • Trained for gas equipment operation and repair.
  • Trained for electrical welding equipment and proper set-up, operation and repair.
  • Trained for equipment proper parameters of welding technique and process.
  • Performed destructive testing for 6G certification and procedure qualification reports.
  • Served on AWS Review Committee overseeing industrial gases with AWS sub-committee for welding distributions.
Candidate Info
18
years in
workforce
18
years
at this job
Voc
Painting

Your Resume, Made Easy.

You are looking for your dream job and need a resume? My Perfect Resume is your solution and takes the hassle out of resume writing. Create the perfect job-worthy resume effortlessly in just a few clicks!