Test Technician Resume Samples

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Test Technicians work in manufacturing units or for software development companies and are responsible for testing products. The most common activities listed on a Test Technician resume sample include handling workstations, reviewing electronic reports, collaborating with engineers, making suggestions for product improvement, and performing calibration tests. Those interested in this type of position should highlight in their resumes examples engineering skills, troubleshooting abilities, attention to details, time management, and teamwork. Eligible candidates hold an Associate's Degree in an engineering discipline.

For more information on what it takes to be a Test Technician, check out our complete Test Technician Job Description.

1

Senior Electronic Test Technician

Troubleshot and repaired/replaced failed electronic components, such as Capacitors; Resistors, FETs and repaired power supplies, in KIV-7; KIV-7MiP; TSE; HSB Peer to Peer production units. Repaired Cryptographic loading devices used to load security codes in Peer to Peer production units.

  • Efficiently assembled production units with PCB's and LED displays using mechanical layouts and blueprints while maintaining flawless quality.
  • Programmed Field Programmable Gate Array (FPGA); Programmable Logic Devices (PLD), using Xilinx programming software and hardware support equipment.
  • Through daily usage of digital meters, oscilloscopes, signal generators and Automatic Test Equipment (ATE) for hardware and software circuit fault analysis.
Candidate Info
31
years in
workforce
4
years
at this job
Electronics
Air Force
2

Coordinator and Test Technician

[company name] Coordinator: Responsible for coordinating with vendors to return or replace defective parts/systems.

  • Supervised receiving, stock and pick operation and ensured in time and accurate deliveries.
  • Worked directly with the customer to support all pre and post-repair activities.
  • Performed and organized inventory management activities on behalf of customer and control inventory to reduce exposure and liability.
  • Managed and tracked inventory accuracy and monitored product shelf life.
  • Oversaw the issuance of RMA number and creating return PO using Microsoft Dynamics AX. Updated Excel documents and OPS chain. Coordinated the shipments of the parts and followed up with vendors for in time response.
  • Monitored the update of Sharepoint and wrote weekly performance report.
  • Performed the installation of operating system/software, inspection and trouble shooting. Loading server operating systems and applying server profiles. Conducted maintenance of Harmonic, Dell and OEM servers upon request.
  • Performed QA testing on the system before returning to the customer, worked with the customer with regards to the new updates and followed up regularly post-repair. Improved customer satisfaction of the company by 20%.
Candidate Info
50
years in
workforce
8
years
at this job
C
Certificate
C
Certificate
3

VEHICLE TEST Technician/designer

Performed static and dynamic testing to commission rehabilitated CQ310 MARTA rail cars.

  • Performed ATC and braking tests on CQ310 and 311 rail cars using test procedures.
  • Installed, inspected, tested and troubleshot modifications on CQ310 and 311 rail cars.
  • Modified mechanical and electrical drawings using Autocad and Inventor 2013.
  • Survey different types of railcars to design and implement schematics, work instructions and drawings for railcar modification.
Candidate Info
34
years in
workforce
11
years
at this job
Electronics
Aircraft Electrical Systems Specialist
4

Electronic Test Technician

Worked as a Functional Test Technician using a Hughes Computer System to test various aircraft harness and wiring boards.

  • Supervised workers in PC Board Build-up area for 2 years.
  • Repaired and maintained all aspects of the Flight Simulator Computers at the Beech Training Center as a Flight Simulator Tech.
  • Assembled all Radio/Electrical Harnesses for Hawker/Beech production aircraft using schematics, soldering, and crimping procedures.
  • Tested and calibrated avionic black boxes and instruments using oscilloscopes, multimeters, and IFR test equipment as an Avionic Bench Tech.
  • Operated N/C Router Machines and used vernier calipers and centimeter rulers.
Candidate Info
HS
Amt
5

Test Technician

Responsible for administrating and servicing Qualcomm devices running under a test automation framework for the Microsoft Windows Phone platform.

  • Tested Qualcomm devices on the intended uses and practices of the integrated technology and provided feedback and support to developers on the results.
  • Helped integrate new and improved techniques for running test executions.
  • Troubleshot faults within test automated systems and connected devices.
  • Replaced hardware and software in faulty devices.
  • Responsible for soldering certain cables and circuit cards for troubleshooting and modifications.
Candidate Info
1
year in
workforce
1
year
at this job
AS
Electronic And Computer Technology
Electronics And Troubleshooting
6

Senior Test Technician/test Technician

Set up and performed mechanical and environmental tests for various suppliers and platforms

  • Tested experimental models under simulated operating conditions for such purposes as development, standardization, and feasibility of design.
  • Performed deployment testing of inflatable restraint components using high speed video equipment.
  • operate high speed cameras, capture and document all still photographs perform pre-test, test, and post-test documentation
  • Prepared and issued Test reports, technical Developed Quality Procedures, Work Instructions, and reported directly to Validation Engineers
  • Evaluated experimental procedures and recommended changes and modifications for efficiency and adaptability to setup and production.
  • Led durability testing mechanical cycle testing and support engineer in analyzing test results.
  • Prepare test samples in accordance with test instructions adhering to established standards and procedures.
Candidate Info
22
years in
workforce
13
years
at this job
Business
Accounting
Business
7

Test Technician

Performed hands-on mechanical tasks (vehicle maintenance, repair, metal fabrication).

  • Conducted pre-test activities: Build, assembled or modified existing fixture for testing purposes; Install engineering test parts and software; this includes building and installing new content test parts which span from small parts to large vehicle subsystems.
  • Documented fit-up and quality of parts installation. Prepared test vehicle with experimental parts for lab operation.
  • Conducted test activities: Investigated, troubleshoot and repaired functional or mechanical problems/failures with the test vehicle and test fixtures.
  • Clearly communicate the magnitude of any issues by direct discussions with the responsible Test and Design Engineering personnel.
  • Performed standard maintenance on the test vehicle and support equipment.
  • Conducted post-test activities: Performed a posttest teardown and inspection of the vehicle as required, including the investigation of critical test parts and failed or nearly failed components.
  • Returned the test vehicle to a pre-test configuration or updating components for an additional field test.
  • Prepared the support equipment for its next operational mission.
Candidate Info
5
years in
workforce
6
months
at this job
HS
High School Diploma
8

Test Technician

Tested the functionality of complex electronic and electro-mechanical systems and sub-systems

  • Performed troubleshooting on a variety of electronic and electro-mechanical systems and sub-systems
  • Interpreted complex schematics, wiring diagrams, and test specifications
  • Worked from functional performance specifications, manual and automated test procedures, and general instructions
  • Set up and conducted alignments, test and troubleshooting of electronic and electro-mechanical assemblies using a wide variety of test equipment
Candidate Info
6
years in
workforce
1
year
at this job
9

Senior Test Technician

Lead test technician for Organic Light Emitting Diode R&D program.

  • Measured radiance output, electrical efficiency and stability of 150K OLED devices for scientists and engineers.
  • Worked with team to develop proper test fixtures and parameters for their specific needs.
  • Designed many test fixtures as required and wrote operational procedures.
Candidate Info
25
years in
workforce
17
years
at this job
AAS
Liberal Arts
10

Test Technician

2550 Garcia Ave, Mountain view, CA 94043 Tel: 415-960-1300 Main Products: Computer Servers, Desk side, Desk top Position: Test technician

  • Troubleshoots down to Components level, diagnoses, repairs and dispositions in-process failures.
  • Test on functional initial SCSI, color boards, CPU, Memories. Final product testing.
  • Provide rework and repair services to the RMA Dept for units returned from customers.
  • Testing, Debug upgrade of PCBs and Servers, subassemblies and final assemblies.
  • System Test, Build and test on desk side desk top, Assembly Hardware.
  • Working with Procedures and Documentation, Schematics, Electro-Mechanical Assembly
Candidate Info
12
years in
workforce
7
years
at this job
AS
Electronics

Your Resume, Made Easy.

You are looking for your dream job and need a resume? My Perfect Resume is your solution and takes the hassle out of resume writing. Create the perfect job-worthy resume effortlessly in just a few clicks!