Hardware Engineer Resume Samples - Page 5

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Hardware Engineers design and test new keyboards, computer chips or printers and oversee the manufacturing of these types of items. Example resumes for this position reflect such skills as designing, debugging, and documenting high reliability electronic modules for well-known aerospace programs, and managing all aspects of the design cycle, such as requirements management, schematic capture, and signal and power integrity, as well as technical analyses, routing instructions, and test plans, amongst others. A degree in computer engineering, electrical engineering or a related field is a requirement on resumes of applicants who are applying for most jobs in computer hardware engineering.

For more information on what it takes to be a Hardware Engineer, check out our complete Hardware Engineer Job Description.

Find out what is the best resume for you in our Ultimate Resume Format Guide.

41

Hardware Engineer

  • Rotated in Production department, Quality department, Marketing department and R&D department.
  • Coordinated between R&D department and Production department. Reported and fixed a PCB design bug related to low yield rate of a module.
  • Tested and optimized the SFP GBIC (Small Form-factor Pluggable Gigabit Interface Converter) module based on Maxim DS1856. Designed a test board for SFP module in development.
Candidate Info
2
years in
workforce
2
years
at this job
Electrical Engineering
Electrical Engineering
42

Hardware Engineer

  • Transitioned email from a hosting solution to an on-site Exchange 2010 System
  • Redesigned and maintained the public facing WWW site
  • Implemented and maintained a backup strategy
  • Provided end-user technical support to utility clients
  • Developed rugged, low-powered system for data collection in remote locations
  • Documented hardware and software installation procedures for recreation purposes
  • Budgeted hardware and software upgrades for utility clients and employees
  • Supervised crews on site during installation of Promethean equipment
Candidate Info
9
years in
workforce
3
years
at this job
Teleproduction Technology
It Networking And Security
43

Principal Hardware Engineer

Defined architecture of chassis-based and 2U intelligent switch designs

  • Performed real estate estimates prior to module design using Visio
  • Designed multi-port NP-based intelligent switch module
  • Created and maintained Viewlogic parts database using MS Access
  • Agile user and administrator
  • Created test procedures for manufacturing
  • Set-up product and test environment for EMI compliance testing and UL safety testing
Candidate Info
23
years in
workforce
3
years
at this job
BS
Electrical Engineering
44

Senior Quality Hardware Engineer

Compared defects against standards and recommend disposition.

  • Performed QA audits and participates in team meetings.
  • Verified compliance to defined processing and author QA processing documentation.
  • Determined and manage handling of "Returned Products". Determine/evaluate Root Cause and Corrective Action. Initiate and close Corrective Action plans.
  • Generated PQA digest and Material Quality Requirements.
  • Reviewed drawings for conformance to requirements.
  • Facilitated failure review board meetings.
Candidate Info
9
years in
workforce
5
years
at this job
BS
Electrical Engineering
45

Hardware Engineer

  • Designed embedded linux digital board from conception to production. Responsibilities include system architecture design, component selection, schematic capture, verification, test specification and procedure creation, factory and customer support. Products include router/bridges/switches/802.11 access point for enterprise telcos using PPPoA, PPPoE, PPPoH, Frame relay layered on xDSL, FXS, FXO, ISDN BRI, PRI T1/E1, TDM using chips based on PPC, Freescale, MIPS32 and 8051 processors using redboot or uboot.
  • Managed and coordinated mechanical, compliance, product labeling, validation, purchasing, and software handoff activities to ensure timely product delivery.
  • Sustained products by performing root cause analysis on field returns and recommended yield/reliability improving measures.
  • Interfaced with software by providing firmware and hardware booting support embedded systems.
  • Administered 2.4 and 2.6 Ubuntu and Redhat 9.0 servers.
  • Managed off-shore hardware and software development teams to build a VDSL access box
  • Familiar with WIFI and VOIP networks with multiple vendor equipment including Nortel and Cisco
Candidate Info
19
years in
workforce
11
years
at this job
BS
Bachelor of Science
MS
Ee
46

Hardware Engineer, Backplane Design Technology and Signal Integrity Design Group

Analyzed multi-layer PCB and backplane via structures using Apsim (MOM) and Ansoft HFSS (FEM) tools.

  • Helped develop an HP VEE based RF relay controller and associated 64 term error correction algorithm to allow a 2-port Vector Network Analyzer to make 4-port differential and mixed mode S-parameter measurements to 20 GHz.
  • Helped develop an HP VEE driven data acquisition program that used a sophisticated communications oscilloscope and pulse pattern generator to characterized the losses and deterministic jitter (inter-symbol interference) induced by high performance PCB and backplane interconnects.
  • Characterized differential and mixed mode S-parameters and frequency domain crosstalk of high performance reference backplanes to 20 GHz.
  • Used sophisticated communications analyzer to measure jitter and time-domain crosstalk of high performance reference backplanes.
  • Measured characteristic impedance of single-ended and differential PCB and backplane traces.
  • Measured propagation delay of PCB and backplane traces.
Candidate Info
1
year in
workforce
1
year
at this job
BS
Electrical Engineering
BS
Applied Physics & Electronics
MA
Communication And Microwave
47

Advanced Hardware Engineer

As Lead Mechanical Designer, utilized SolidWorks 2010 for the layout and development of Microcontroller Driven 7-Axis Low Cost 500+ Position NMR AutoSampler System

  • Designed Clocking Tube Cap Gripper Mechanism for Z-Head Assembly
  • Utilized 3D Printing to create AutoSampler Wheel Assembly so that Marketing, Manufacturing, and Service could provide "hands on" feedback
  • Supported thru Manufacturing Release an Automated (SCARA Robot) 96 Position NMR AutoSampler. This included design changes that would speed up field installation as well as designed and built test fixtures to validate Robot performance
  • Designed adjustable nonmagnetic Slip Clutch and Test Fixture for use in characterizing performance of Probe Tuning System
Candidate Info
22
years in
workforce
4
years
at this job
Bsme
48

Hardware Engineer

Provided hardware and administrative support on DCGS systems to include: Ground Control Processor (GCP), Rapid Interface Manager (RIM), Multiple Source Correlation System (MSCS), Mission Intelligence Segment (MIS), and Communications Segment (COS).

  • Troubleshot hardware / software and network (LAN / WAN) systems to the component level, performing system upgrades, installation, integration, and repair while producing and maintaining dynamic documentation in a real time environment.
  • Conducted administrative tasks, maintain user accounts, backups and restoration on GCP, MSCS/RIM (SOLARIS 10).
  • Created and used a variety of scripts and text editors to amend system files, and automate administrative tasks.
  • Preserved specific TADIL J link configurations, UHF/VHF Radios, antennas, and Tactical Information Broadcast System (TIBS) terminals along with associated satellite antennas and receiver/transmitters.
  • Built a test environment for upgrades and troubleshooting.
Candidate Info
22
years in
workforce
3
years
at this job
Information Technology
49

Hardware Engineer

  • Collaborated with team of 4 to design schematic for baseboard of GeoAmida (hand-held terminal of Geodesic)
  • Re-designed Impact Printer Board for GeoAmida and is in mass production since Feb,2011.
  • Evaluated CMOS sensor module using fully custom Evaluation Board
  • Demonstrated USB Dial-up modem using LSI chipsets
Candidate Info
3
years in
workforce
2
years
at this job
BA
Electrical Engineering
MA
Electrical Engineering
50

Hardware Engineer

Designed boards used in high-speed night vision digital cameras

  • Designed DC power circuits for boards, using DC/DC converters, LDO regulators, voltage monitor circuits, and current monitor circuits
  • Designed test fixtures for high-speed cameras
  • Using oscilloscopes and logic analyzers bring-up and troubleshoot hardware in the lab
  • Designed Virtex2 and Spartan3E FPGAs, and XC95xxx CPLDs using VHDL
  • Developed VHDL using ISE and synplify Pro
  • Schematic capture using OrCAD
Candidate Info
22
years in
workforce
2
years
at this job
Bsee

Your Resume, Made Easy.

You are looking for your dream job and need a resume? My Perfect Resume is your solution and takes the hassle out of resume writing. Create the perfect job-worthy resume effortlessly in just a few clicks!