Hardware Engineer Resume Samples - Page 4

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Hardware Engineers design and test new keyboards, computer chips or printers and oversee the manufacturing of these types of items. Example resumes for this position reflect such skills as designing, debugging, and documenting high reliability electronic modules for well-known aerospace programs, and managing all aspects of the design cycle, such as requirements management, schematic capture, and signal and power integrity, as well as technical analyses, routing instructions, and test plans, amongst others. A degree in computer engineering, electrical engineering or a related field is a requirement on resumes of applicants who are applying for most jobs in computer hardware engineering.

For more information on what it takes to be a Hardware Engineer, check out our complete Hardware Engineer Job Description.

Find out what is the best resume for you in our Ultimate Resume Format Guide.

31

Principle Hardware Engineer -technical Lead

Responsible for all 10GBase-T PHY reference designs: schematic, layout, BOM, Hardware Design Guides.

  • Developed 10GBase-T PHY Customer boards in different form factors: Single Port X2 module, Dual Port Media Convertor and NIC, Quad Port with 2X4 MagJack uplink module.
  • Developed 10GBase-T POE repeater and 10GBase-T 48 Port Switch (Fulcrum) for Marketing Demos.
  • Designed test platforms for MDI/XAUI/XFI characterization, 10G IEEE compliance test, 10G Magnetic characterization, etc.
  • Performed MCM Package substrate design with HDI PCB technology for current 40nm Dual Port chipset.
  • Pre-sale and Post-sale Applications support for key account customers (Cisco, Intel, Arista, etc.)
Candidate Info
15
years in
workforce
7
years
at this job
BS
Electrical Engineering
PhD
Electrical Engineering
32

Sustaining Firmware / Hardware Engineer IV

Experienced bug resolution, software maintenance, and ongoing development of various IGX8400- related hardware and firmware including FRM, NTM, CVM, ATM

  • Involved in live customer network debugging situations and problem resolution
  • Resolved hardware issues, software issues, and customer configuration issues
  • Gained and leveraged experience in hardware design
  • Programmed in C, assembly (8051, DSP56001)
  • Utilized VxWorks, pSOS
Candidate Info
14
years in
workforce
6
years
at this job
BS
Electronics Engineering Technologies
33

Hardware Engineer

Performed VHDL FPGA timing & signal integrity simulation using HyperLynx at 200 MHz speeds.

  • Tested dual PowerPC 7447A on a VME card - including 2.5 gigabit/s PCI-Express LRU testing
  • Marvel Discovery 3 bus bridge chip with 133 megahertz PCI-X and gigabit Ethernet.
  • Modification of Biowarfare Detector LRU and Altera FPGA for Dual BIT redundancy,
  • Designed BioBoard CCA and designed a second detector board with a 5 GHz switch.
  • Captured analog data (50ns 5mv 50 ohm pulse) from laser detectors using a Charge Capture-and-Store Multiplexer, converted it to TTL, and fed it into the FPGA. A FIFO was used for storage.
  • Wrote test documents to ensure both LRU and CCA functionality.
Candidate Info
10
years in
workforce
2
years
at this job
BA
Technology
34

Hardware Engineer

Development and Integration of Test and Simulation Equipment, PWBA for the Aerospace Industries.

  • Component selection for the PWBA, Assembly Drawings, Rework Instruction.
  • Updated Bill of Material for obsolete components on PCB.
  • Implemented PWBA Envelope drawing for the Carrier and Daughter card in AutoCAD.
  • PMC Connector Alignment, Parts collision avoidance.
  • Designed VME Front Panel making sure the cutouts for the LED and the Connectors are correctly aligned with the PWBA.
  • Implemented RF Cable/Connector selection and assembly drawings for the Frequency Synthesizer Distribution Unit Test fixture.
  • Prepared AutoCAD drawings, Production Test Plans.
Candidate Info
15
years in
workforce
1
year
at this job
BS
Physics
MS
Electrical Engineering
35

Hardware Engineer

  • Took full responsibility for the all the Simultaneous DAQ boards contributing to high-volume sales opportunities to key accounts.
  • Conducted a major VHDL code refactoring on NI-6115 and NI-6120 to transition from asynchronous logic to synchronous code that meets digital design best practices.
  • Optimized the digital architecture and FPGA coding and reuse it in other products.
  • Redesigned the Simultaneous DAQ register map for future STC2-based SMIO products.
  • Main developer and key executor in the release of multiple new products including the NI-6120 rev, NI-6143, NI-6133, NI-6122, NI-6123 and the DAQ-STC2 ASIC.
  • Demonstrated leadership skills by proposing the project's schedule, defining the tasks, mitigating potential risks and setting aggressive milestones and developing the digital validation plan.
Candidate Info
3
years in
workforce
3
years
at this job
BS
Electronics And Computer Science
36

Hardware Engineer

Designed critical reagent dispense-detection card with electro-optical sensing and 68HC11 embedded microcontroller for blood-bank analyzer.

  • Redesigned production circuits around component obsolescence.
  • Led Design Review of blood gas analyzer.
  • Redesigned oxygen measurement circuit to meet requirements by trading off S/N against bandwidth to remove backscatter error from sample.
Candidate Info
11
years in
workforce
7
years
at this job
Msee
Bes
37

Lead Hardware Engineer

Cofounded a hardware startup to a build solar -powered wireless weather station for agriculture

  • Lead the design and development of custom low-power embedded systems including analog and digital circuit design, PCB layout, component selection and systems int egration
  • Firmware programming in C / C++ on Atmel ARM Cortex-M0+ based microcontrollers
  • Developed USART, SPI, I2C device drivers for digital sensors and external Flash memory
  • Created product specification, assembly and test documentation for contract manufacturers
  • Travelled to manufacturing facilities both locally and abroad in Shenzhen, China to source critical components, cost product and established project plan and timeline
Candidate Info
6
years in
workforce
1
year
at this job
Electrical Engineering
38

Senior Hardware Engineer

Responsible for the VMware virtual and physical server builds, configuration, and maintaining optimal performance of each environment including Production, Mock, Training, and other Development environments.

  • Assisted with the build of a new ESXi 5, 7 node cluster. (Including the hardware install)
  • Responsible for trouble shooting server problems and application issues reported by users.
  • Functioned as technical/hardware lead for all of the onsite hardware engineers.
  • Served as the technical liaison between ATOS and Mercedes/Daimler coordinators.
Candidate Info
26
years in
workforce
1
year
at this job
AA
Electronic Engineering
39

Hardware Engineer

Hardware circuit design to generate high precision 400 Hz sinusoidal signal using 1.842 MHz crystal and a band pass filter to extract 400 Hz.

  • Schematic design of general purpose hand-held terminal with 30 keys and 4 line LCD Display using PIC17C756 microcontroller.
  • Research Experience: Design of adaptive Warped Discrete Fourier transforms (WDFT) for image compression and proved it was better than DCT based compression.
  • Awarded BRAVO (Outstanding performer in Freescale) for efficient design and implementation of codec automated test suite.
  • C++; C; Matlab; Assembly programming for TMS320C55x, TMS320C64x+ and ARM9/11 processors.
  • Visual Studio; Programming under any flavor of UNIX environment.
Candidate Info
1
year in
workforce
1
year
at this job
BE
Electronics And Communication Engineering
MS
Master of Science
40

Senior Hardware Engineer

Designed two-way radio controller circuitries based on the Texas Instruments OMAP dual core SoC microprocessor, NAND flash, mobile DDR and USB 2.0 & UART peripheral interface.

  • Performed pre and post-layout impedance matching, signal integrity and timing simulation of USB, address and data bus using Allegro PCB SI tool.
  • Performed radio level USB and ESD compliance testing to prevent peripheral communication failure in the field.
  • Created detailed service manual, Product qualification report, Technical architecture and Hardware software interface document.
  • Managed Bill of materials (BOM) for multiple projects.
  • Collaborated with cross-functional teams to participate in mechanical design and implementation; assist in software debugging and design verification testing.
  • Created detailed test plans for simulation, signal integrity, timing integrity, functionality and reliability testing as well as lab test all circuit and system level design verification.
  • Identified DFMEA for the controller and peripheral sub-circuits and drafted up plans to reduce RPN per pass.
  • Traveled to Penang, Malaysia to support factory proto build, radio configuration, turn-on and debug of hot bucket proto boards and giving approval for full quantity build.
Candidate Info
9
years in
workforce
4
years
at this job
BS
Electrical Engineering

Your Resume, Made Easy.

You are looking for your dream job and need a resume? My Perfect Resume is your solution and takes the hassle out of resume writing. Create the perfect job-worthy resume effortlessly in just a few clicks!