Electrical Technician Resume Samples

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Electrical Technicians create, maintain, and repair the electronic components and equipment used in equipment or devices that involve electricity. Sample resumes for this position highlight such skills as installing, testing, and maintaining electrical equipment, including appliances and electrical circuits; and diagnosing malfunctioning electrical products to locate and correct problems. To become an electrical technician, an applicant must be able to show an associate's degree in electrical or electronic engineering technology on his or her resume. This can be earned from a vocational school, community college, or technical school.

Looking for cover letter ideas? See our sample Electrical Technician Cover Letter.

Find out what is the best resume for you in our Ultimate Resume Format Guide.

1

Electrical Technician

Develop, plan and supervise the installation of electrical power plans, establishing and maintaining utilities to facilities.

  • Prepared, planned and supervised the installation of commercial wiring for 5 large projects, providing critical electric and utilities capabilities to combat operating forces.
  • Conducted wiring and electrical assessments of isolated operating outposts for combat forces, providing optimum functionality of utilities and electrical equipment.
  • Account for $3Million worth of utilities assets, accounting for equipment utilizing appropriate tracking and administrative procedures.
  • Proactively analyze power grid operations to increase proficiency of resources in the grid leading to a decrease in outages and improving efficiencies of utility assets.
Candidate Info
7
years in
workforce
6
years
at this job
HS
High School Diploma
Electrician Course
2

Electrical Technician

Repair and maintain lighting, ventilation, and electrical distribution systems, including electrical outlets, motors, generators, fuse and breaker panels, flight deck lighting, and ship's signal lights. Completed electrical distribution control panel training and qualification and performed all required task to ensure uninterrupted power to various systems on board ship. Trained junior personnel in watch standing principles, electrical repair, and damage control requirements.

  • Considered a Subject Matter Expert in all aspects of propulsion plant operations from steam and electrical generation system along with associated equipment.
  • Supervised a work center of 7 colleagues and delegated daily work tasks.
  • Recorded over 2000 hours of Chief Auxiliary Operator Watch and over 2500 hours as In Port Emergency Watch.
  • Reduce downtime by 50 % and saved the Navy over $110k by conducting repairs and maintenance on all 60 Hz Electrical Distribution system and auxiliary equipment.
  • Qualified Electrical Load Center Rover whom is responsible in the Ship's 60 Hz Electrical Distribution during normal operations. Responsibilities include inspecting 25 load centers for fire flooding and grounds.
Candidate Info
9
years in
workforce
8
years
at this job
HS
High School Diploma
3

Supervisor/electrical Technician

Responsible for maintaining, troubleshooting, and repairing the Electrical/Instrument, Automatic Flight Control, and Engine systems on 4 E-2C Hawkeye fixed-wing aircraft while attached to deployable squadron Carrier Airborne Early Warning Squadron One Two One (VAW-121).

  • Modified eight E-2C Hawkeye […] turboprop engine wiring harnesses from four blade propeller to NP2000 eight blade propeller.
  • Contributed to squadron's success of 98 percent mission completion rate in support of COMPTUEX onboard aircraft carrier USS Dwight D. Eisenhower (CVN-69).
  • Contributed to squadron's success of two Partnership of the Americas (POA) deployments onboard aircraft carrier USS George Washington (CVN-73).
  • Obtained Collateral Duty Inspector (CDI) qualification for [company name].
  • Built, updated, maintained entire [company name]'s personnel training jackets and resulted in a zero discrepancy mark during Aviation Maintenance Inspection (AMI).
Candidate Info
6
years in
workforce
4
years
at this job
Math & Science
4

Electrical Technician

Installed, adjusted, tested, modified, repaired and maintained electrical and electronic parts, assemblies, systems and equipment in prototype, developmental, and production of cables, harness and subassemblies.

  • Installed electrical and electronic parts, assemblies, systems and equipment in according to blueprints, schematics, wiring diagrams and other specifications.
  • Reassembled repaired electric motors to specified requirements and ratings, using hand tools and electrical meters.
  • Interpreted test results to diagnose malfunctions and adjusted, repaired, and replaced defective parts.
  • Modified components according to blueprint specifications and engineering drawings.
Candidate Info
7
years in
workforce
7
months
at this job
5

Electrical Technician II

Performed regular and scheduled electronic maintenance on hydraulic fracturing equipment including Free Meyer, IDEC and Surefire Data Vans, Triplex and Quinitiplex Frac Pumps, Blenders, Hydration Units, Conveyors, Mountain Movers, 10K and 15K iron to ensure equipment remained in good working order.

  • Ensured all equipment was properly connected to the Data Van using required data and network cables at each new location.
  • Installed and configured the Data Van satellite internet uplink at each new location.
  • Performed repairs on equipment as needed in the shop and various austere locations.
  • Installed and configured electronic and electromechanical equipment and instrumentation.
  • Assembled, installed or repaired wiring, electrical and electronic components.
  • Diagnosed and troubleshot electrical problems to correct them using wiring schematics, repair manuals, and part catalogs as necessary.
  • Maintained a safe work environment following all Quality, Health, Safety and Environment (QHSE) requirements at all times
Candidate Info
8
years in
workforce
9
months
at this job
6

Electrical Technician

Using LibreCAD and gEDA Schematic software drafted new and upgraded control circuits for industrial presses and annealing ovens.

  • Overhauled Two Bliss 6K 225 Ton Knuckle-joint presses optimizing control circuits,
  • Assembled a 40kg per hour precious metal caster without any accompanying schematics or documentation successfully without major faults
  • Isolated and repaired several major electrical faults to several presses allowing the production of coins preventing any major shutdowns of the mint
  • Performed a completely overhaul of a precious metal caster in one day after the completely
  • Trained Caster Operators in use of the new 40kg per hour caster.
Candidate Info
6
years in
workforce
3
months
at this job
7

Electrical Technician

  • Installed, tested and repaired electrical and electronic equipment during the manufacture of petroleum refinery processing equipment.
  • Assisted journeyman electricians with installation of 480 and 208 volt 3 phase AC power, providing a more than 10% increase in manufacturing machine capacity.
  • Supported facilities maintenance electricians with inspection, repair and upgrade of electrical systems in newly acquired facility to be used as a welding school for Pikes Peak Community College.
  • Troubleshot shorted 110 volt circuit. Discovered chaffed wiring inside EMT conduit. Replaced wire, eliminating potential hazard, injury to personnel and possible damage to $2.4 million facility.
Candidate Info
12
years in
workforce
7
months
at this job
AAS
Aircraft Maintenance Technology
BS
Management
Air Force
8

Electrical Technician

Managed team of 4-8 assembly technicians

  • Constructed and tested electrical wiring harnesses, control panel assemblies for industrial applications
  • Assembled prototype first-run electrical assemblies for customer approval
  • Fabricated custom electrical panels and enclosures.
  • Tested ad inspected manufactured assemblies for quality, functionality to ensure 100% customer satisfaction
Candidate Info
4
years in
workforce
4
years
at this job
9

Electrical Technician

On site electronics technician, general maintenance and repair services for injection and blow molding equipment and sub systems, at a major plastic tank manufacturer.

  • Designed and installed a senor network on conveyor systems to prevent damage to company product.
  • Authored procedures to recapture waste oil, saving resources for cleanup and removal.
  • Mapped entire plant electrical systems correcting old and erroneous electrical panel's data, ensuring safety and saving man-hours.
  • Designed and installed electronic, mechanical and pneumatic modification to blow molding unit to run newly designed product, saving $10,000 in contractor costs.
  • Authored procedures for Plant compressed air management
  • Designed and manufactured new tools and fixtures using welding, milling and lathe machines.
Candidate Info
37
years in
workforce
10
years
at this job
Electronics
Medium Current Ion Implanter
Compressed Air Systems
10

Electrical Technician

Install, repair, and self-inspect electrical wire harnesses in models 60, 40, 45, 31, and Challenger 300 aircraft from nose to aft utilizing hand tools, power tools, and precision measuring instruments.

  • Developed a test set for 60 model flight control systems that saved company money and time.
  • Superior troubleshooting demonstrated through quick resolution of electrical system defects or anomalies.
  • Recognized "go-to" person to resolve complex installation and repair issues.
Candidate Info
23
years in
workforce
19
years
at this job
HS
High School Diploma
AA
Associate of Arts

Your Resume, Made Easy.

You are looking for your dream job and need a resume? My Perfect Resume is your solution and takes the hassle out of resume writing. Create the perfect job-worthy resume effortlessly in just a few clicks!