Electrical Design Engineer Resume Samples - Page 2

Electrical Design Engineer

Both hardware and software design of high-density mobile storage control systems and safety devices. Responsible for all phases including specification, bread boarding, schematic capture, prototyping, development, testing, production introduction and field support.

• Designed laser based scanning and detection system for user safety. Implemented hardware and migrated to C coding for improved documentation and maintenance.
• Developed Zero Force Sensor system using 8051assembly language.
• Guided and directed tasks of electronic technician
• Received four patents for innovative safety systems.
• Designed and implemented hardware and software for an automated blood glucose monitor. Developed user interface using a touch display in an embedded low power PC system. Established guidelines for safety agency compliance. Involved in all aspects of the project including mechanical design and pre-clinical testing.
• Designed a dual display video board for the PC back plane. Designed and specified major electrical components for integrated anesthesia system.
• Knowledgeable of UL544, CSA22.2, IEC601-1 and other international medical safety agency regulations and the FDA 510K process.
• Designed microprocessor based operating room ventilator to improve manufacturability and reduce component cost.
• Responsible for software validation for TUV black box and white box testing for safety relevant computer category ventilator.
• Directed technicians on prototype build and test

Electrical Design Engineer

Utilized RSLogix 5000 to program Programmable Logic Controllers.

• Trained, guided, and managed workloads and priorities of Controls Designer and CAD Operator.
• Ensured all electrical drawing packages met NEC, UL508A, and other required standards.
• Reviewed technical specification documents for all electrical control projects.
• Conducted Factory Acceptance Testing.

Senior Electrical Design Engineer

Implemented 12-bit, 1MSPS, programmable SAR ADC IP block for PSoC5 and PSoC4

• Designed analog interface logic for PSoC3 and PSoC5 integrated circuit platforms
• Increased routability of PsoC3 and PsoC5 programmable analog routing networks (patent granted)
• Developed parallel, self-checking, algorithmic DFT approach for testing custom programmable logic array for PSoC3 and PsoC5 - Verified approach with TurboFault fault simulator
• Reduced total cycle time through mixed signal design and test productivity initiatives
• Co-authored and presented mixed signal verification paper at CITEC 2007 (internal technical
• Mentored other engineers at all levels on various subjects (e.g. analog behavioral modeling, Design
• Interviewed analog and mixed signal design team candidates

Electrical Design Engineer, Production Wiring

Re-worked production wire assemblies in prototype engine certification vehicles accommodating updated engine calibration components.

• Performed troubleshooting for electrical system malfunctions, completed repairs as needed and reported issues to component design engineers.
• Used electronic component design schematics in designing, packaging, and releasing production instrument panel wiring assemblies.
• Served as Liaison with assembly plant engineers coordinating revisions to wire assemblies to accommodate assembly plant build issues.

Sr. Electrical Design Engineer

for a battery operated portable OmegaTM Handheld XRF Alloy Analyzer.

• Designed from conception through full production analog/digital circuits, RF system design, DC/DC converters, sensors interface, generated schematic, prototyped, evaluated, and released products to the manufacturing.
• Designed and developed firmware for 8-bit embedded microcontroller to drive and monitor subassemblies.
• Assisted in design and documentation of X-50 Benchtop XRF Analyzers.
• Redesigned OmegaTM handheld and X-50 Benchtop XRF Analyzers in order to comply with CE markings in accordance with IEC 60601-1-2 standards.

Electrical Design Engineer

Served as project engineer and developer of lighting, signal and power distribution systems for various clienteles, including substations, commercial structures and office buildings.

• Create Substations Elementary and Wiring diagrams for Transformers.
• Efficiently assessed scope of services and provided customers with estimations, reviewed and edited plan specifications, approved shop drawings and conducted field surveys.
• Evaluated designs and project qualifications to assure compliance with NEC, UBC, CBC, CEC and other related state, county and city codes and utility standards.

Electrical Design Engineer

• One of the two Electrical Engineers responsible for developing start-up vision and standards.
• Developed design process methods related to energy efficient lighting design and 3D BIM design for power distribution and lighting of educational, commercial, governmental, industrial, and residential buildings.
• Created and executed operating procedures used to acquire new clients.

Electrical Design Engineer

Prepared electrical plans and details, design specifications for buildings, load and short circuit calculations for client approval.

• Designed aerial/underground distribution systems (34.5kV, 13.8kV, 4.6kV, /480kV) controls and instrumentation of the various facilities and substation.
• Supervised the electrical installation of outdoor and indoor hazardous and non-hazardous areas.
• Coordinated with the architect, civil and mechanical engineers in the preparation of plans.
• Supervised CADD operators regarding electrical drawings.

Senior Electrical Design Engineer

Prepared complete plans, design, construction drawings and technical specifications of power distribution facilities.

• Gathered field data necessary for design of electrical works of power distribution facilities
• Reviewed and evaluated specifications of electrical equipment and works proposed by electrical suppliers and contractors.
• Conducted field inspection of projects in progress when necessary
• Prepared memoranda, correspondence and technical reports covering field inspection.

Electrical Design Engineer

Assisted lead Electrical Microwave Engineer to ensure quality board design and performance. Interpreted blueprints and implemented knowledge of geometric tolerance.

• Successfully designed multi-layer microwave modules and printed wiring boards implementing autocad for defense industry and commercial market.
• Designed 3D model drawings of mechanical parts (connectors, components), module assembly documents.
• Directed microwave assembly lab at build and test of modules.