Control System Engineer Resume Samples

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Control System Engineers provide application and control systems design and development for systems of varied complexity. Example resumes in this field indicate duties such as producing and editing control system design documents and FDA validation documentation per GAMP guidelines for the pharmaceutical industry; and supporting field engineers, test technicians, and end users on controls and process-related issues throughout the project's lifecycle. Sample resumes show a minimum educational requirement for this position of a Bachelor or Master of Science degree in electrical engineering, computer science or computer engineering, or equivalent experience.

1

Lead Process Control System Engineer & Digital Systems Supervisor

Design, implement, and maintain site control systems, including security and controls, new application development, data transfer and storage, and operator interfaces. Coordinate and collaborate with diverse groups assessing projects from initial design through start-up. Develop service and equipment support contracts, training budgets, and 1-, 3-, and 5-year priorities.

  • Coordinated a team of engineers, technicians, and contractors to implement control system changes for an average of 32 capital project installations annually.
  • Lowered total cost of ownership for site process control and automation systems by establishing a shared support structure and alleviating administrative overhead through lean process enhancements.
  • Reduced product shipping quality incidents by 95% using agile development practices in the creation of a pipeline automation application. Dedicated over 1,400 hours to code and test 15 programs to complete project.
  • Led team of vendors and site engineers to reduce the risk of a ground fault systems failure by 98%.
  • Improved control tuning throughout the plant resulting in a $1.8M annual benefit to production, optimization, and maintenance.
  • Incorporated knowledge management tools into the development of an electronic management of change and system allocation database, reducing documentation errors 66%.
  • Train operations, maintenance, engineering, and process control teams in various capacities as necessary to effectively and safely complete each project.
  • Mentored 3 digital systems technicians in preparation for automation engineering role.
Candidate Info
17
years in
workforce
5
years
at this job
AS
Associate of Science
BA
Interdisciplinary Studies (operations Management & Mis Focus)
2

Engineering Specialist, Control System Engineer

Provided extensive control system maintenance supports. [company name], verified requirements traceability, and tracked metrics for system costs, schedule, and aircraft operational performance. Incorporated the voice of the customer into the design features of control system product to enhance quality function deployment (QFD)

  • Attained 95% of analysis for the cost of quality in terms of appraisal, prevention, internal failure and external failure costs.
  • Effectively performed flight control actuator fault insertion to conduct degraded mode tests and Failure Mode Effect Analysis
  • Enhanced system stability and minimized the impact of Vortex ring.
Candidate Info
17
years in
workforce
2
years
at this job
BS
Electrical Engineering
MA
Technology Management
3

Control System Engineer

  • Designed HVAC & Process Control Systems
  • Programmed Powers PPCL for all designed systems
  • Executed BAS startup & checkout
  • Performed project management including wiring subcontractor / pipefitter Mgt and monthly financials
  • Developed and conducted BAS training sessions
  • Projects included: - Boeing 45-01, 45-04 747 Paint Facilities, Everett, WA - Formal Commissioning '94,'95
Candidate Info
19
years in
workforce
10
years
at this job
MA
Theological Studies
Electrical Engineering
4

Design and Control System Engineer (robot Artist)

  • Communicated with the milling machine maker to find out the technical specification and related documents.
  • Modified a given milling machine and integrated it with the robot artist as a drawing platform.
  • Developed data acquisition software and control system for the platform.
  • Improved the algorithm in LabView to reduce the drawing time from 30 minutes to 5 minutes for each image.
Candidate Info
1
year in
workforce
5
months
at this job
BS
Mechanical Engineering
BS
Industrial Engineering And Operations Research
5

Team Lead/control System Engineer

  • Led 2 software engineers to develop prototype of VeriSpecs software to formally specify control system requirements and automatically verify system performance at various levels.
  • Investigated an engine fire case of a Boeing 737 aircraft for Cassels Brock law firm.
  • Provided technical services for aircraft operators to monitor engine performance and diagnose engine failures based on engine data recordings.
Candidate Info
9
years in
workforce
2
years
at this job
BS
Electrical Engineering – Power System
Aerospace Engineering – Flight Control System
6

Control System Engineer

South Pars Gas Field Development Phase 12 Detail Engineering Project

  • Generated Flow Element & valve's sizing calculation sheets.
  • Prepared data sheets for process measurement (such as Temperature gauge, Pressure gauge )
  • Developed purchase requisition for field instruments, valves, DCS, ESD,
  • Developed Instrument Datasheets, Loops Diagrams and Indexes by using SPI INtools
Candidate Info
3
years in
workforce
2
years
at this job
Electrical Engineering
7

Quality Control System Engineer Intern

  • Developed and documented compliant AS9100C Safety Policies, Processes, and Procedures for all departments
  • Created company flowchart/value stream map describing the sequence of processes involved in Product Realization
  • Generated technical engineering drawings that fulfilled the customer's specifications and requirements
  • Managed the quality system implementation that lead to increased employee safety and lower discrepant materials costs
Candidate Info
12
years in
workforce
1
year
at this job
BS
Mechanical Engineering
8

Control System Engineer

Volvo purchased Mack Truck in 2001 to create a global leader in over the road heavy duty trucks, buses and engines.

  • Wrote verification procedures for engine and vehicle control and diagnostic software.
  • Executed the procedures either on a simulator or on board a vehicle. Wrote final reports on these procedures.
  • Investigate customer and engineering issues with software either released or still under development.
Candidate Info
28
years in
workforce
2
years
at this job
BS
Mechanical Engineering
9

Process Control System Engineer

Project management of system upgrades and turnkey computer systems, responsibilities include working with computer applications vendors, research computer hardware and software solutions, evaluating, recommending, designing, planning, installations, testing and commissioning.

  • Improve operation efficiencies and cost savings.
  • Data collection and reporting of production and process data.
  • Designed, developed, implemented and maintained computer programs.
  • Support and maintained various computer hardware platforms, network and communication equipment with the goal of zero computer down-time and interruption of production.
  • Lead project for Waste Water Treatment facility computer replacement.
  • Improve process reliability and cost saving through system upgrades and hardware elimination.
  • Organized leased hardware maintenance contract, cost saving of $20,000/yr.
Candidate Info
17
years in
workforce
11
years
at this job
AS
Computer Science
Business Management
10

Control System Engineer

  • Coordinated industrial boiler control projects from inception through completion.
  • Performed site surveys, generated scopes-of-work, manpower estimates, and sales proposals.
  • Engineered the control systems and scheduled resources to install, test, and commission the systems.
Candidate Info
3
years in
workforce
2
years
at this job
BS
Electrical And Computer Engineering

Your Resume, Made Easy.

You are looking for your dream job and need a resume? My Perfect Resume is your solution and takes the hassle out of resume writing. Create the perfect job-worthy resume effortlessly in just a few clicks!