Cmm Operator Resume Samples

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

CMM Operators are in charge for handling co-ordinate measuring machines. Typical duties listed on a CMM Operator resume sample are programming machines, measuring products, checking if they meet standards, discarding inferior quality products, handling routine maintenance, generating reports, and updating their knowledge of the latest technologies. The ideal candidate should showcase in his or her resume mechanical aptitudes, dexterity, stamina, detail-orientation, teamwork, and time management. Successful candidates for this job usually hold an Associate’s Degree in engineering.

1

Quality Technician/cmm Operator (contract)

Conducted and implemented activities concerned with the quality control and quality assurance of industrial processes of conforming and non-conforming products.

  • Performed measurement analysis using a Coordinate Measuring Machine (CMM) to ensure incoming material
  • Developed and initiated corrective and preventive action plans through PPAP and ISIR process to assure acceptable levels of quality performance are established and maintained.
  • Planned and implemented the 5S lean manufacturing procedures and designed method to organize a work space for efficiency and effectiveness.
Candidate Info
16
years in
workforce
5
months
at this job
AS
Business Management
BA
Environmental Studies
2

CNC Machine Operator/ CMM Operator

Participated in "Lean Manufacturing" while trying to make processes more employee efficient, and try to save the company money. Paid extra close attention to detail as we check our parts that come out of the machine and off the CMM.

  • Measured tolerances as small as 10 microns. (Smaller than the human hair)
  • Worked with fellow co-workers to get orders complete, to what our supervisor tells us to run.
  • Communicate with my Sr. Machinist if there were to be a problem with a machine or a part fails.
  • Complete proper preventative maintenance on the machines and equipment.
  • Properly engrave parts to the blueprint specs.
  • Participated in Safety Audits in the Wheels and Brakes plant, as well as the Carbon plant.
  • Conducted Probe Validation and Probe Calibration on the CMM's.
Candidate Info
11
years in
workforce
3
years
at this job
HS
High School Diploma
3

Quality Control/ CMM Operator

  • Performed quality work checks to insure product met standards
  • Performed all work in accordance with quality standards and established safety procedures
  • Identified product defects and completed appropriate documentation when defects detected
Candidate Info
1
year in
workforce
1
year
at this job
HS
Automotive Paint And Body
4

CMM Operator / Dimensional Inspector

Operate Brown and Sharpe CMM using PC-DMIS software for dimensional area on production parts.

  • Use optical comparator, height gauges, calipers, dyers, gauge blocks and pins for physical inspection on parts.
  • Read blueprint drawings, work instructions, and disposition parts if needed.
  • Assist Engineering with review and corrective action on product non-conformance's and disposition types.
  • Knowledgeable with QMS ISO9001/AS9100 Standards.
Candidate Info
21
years in
workforce
2
years
at this job
C
Technology Center
C
Certificate
AAS
Associate of Applied Science
5

QA Inspector / CMM Operator

  • Responsible for problem solving and troubleshooting issues with short orders and quality discrepancies.
  • Responsible for In process, first article, final Inspections, as well as assembly line parts of all assembled parts as well as half assembled while in process, also 3-Tier dimensional inspections.
  • Able to read blue prints and use various hand tools and gauges as follows, micrometers, calipers, depth gauge, ball race gauges, Pav gauges, plug and ring gauges, diameter gauge (able to read up to .0001 tens of a thousands) also inventory control, forklift operator certified.
  • Knowledge and experience with ISO procedures 9001, and all kinds of quality testing such as robotics and wet testing.
  • Knowledge and experience with Surfcam, PCDMIS, GibbsCAM, Easy Systems and MasterCaM.
  • Developed and Implemented several new techniques and programs successfully, also used painting skills on many surfaces such as sheet metal, aluminum, and cast iron.
  • Knowledge and hands on experience with CMM; Coordinate Measure Machine, familiar with G & M codes as well as GD & T, surface plate, edit programs on CMM, multiple testing's such as 303, in house sap systems.
Candidate Info
12
years in
workforce
7
years
at this job
AAS
Information Technology
6

Inspector Class / CMM Operator

  • Verify QC adequacy of receiving storage, handling, and shipment procedures.
  • Submitted samples of product to government laboratory for testing as indicated by department procedures.
  • Stamped mark of approval or rejection on product and wrote report of examinations. (First Article, CMM, and SPC)
  • Performed all aspects of and computer aided inspection as well as visual and dimensional inspection.
Candidate Info
4
years in
workforce
4
years
at this job
Certification
7

Aerospace Quality Control Inspector/cmm Operator

Training inspectors/operators on equipment, software, and inspection methods

  • Daily scheduling and delegation of quality resources in support of production.
  • Controlling Shop router and documentation such as, material cert, press cycle report, 5-axis cycle report, material allocation sheet, operator instruction sheets, outside process certs.
  • Receiving inspections, verifying outside processing cert vs. purchase order.
  • Operating and calibrating daily of CMM and Romar arm PCMM, Using Opendmis and Verisurf software, analyzing inspection data and generating reports.
  • Performing first part and last part verifications using PCMM and mechanical precision measuring tools.
  • Conducting frequent surveillance on production floor, ensuring all job traveler documentation is accurate and procedures are followed correctly by press and 5 axis machine operators.
  • Revising press operator instruction sheets for various parts to maximize operator effectiveness and conformance of parts.
Candidate Info
8
years in
workforce
5
years
at this job
BS
Business Administration
8

Cmm Lab Technician Leader / Cmm Operator

Create and manage CMM Lab's continuous improvement plan and budgets.

  • Maintain, calibrate and purchase all lab equipment and supplies.
  • Program and operate Browne & Sharpe One DCC CMM using PC-Dims 3.7MR3 CAD++ software.
  • Analyze inspection problems, defective parts and faulty machining processes and recommend corrective action procedures.
  • Inspect, calibrate and design inspection checking fixtures and checking aids for automotive stampings.
  • Manage attribute checking gauge maintenance program and schedule outside calibration sources.
  • Supervise and train Gauge Technician, Certified Quality Technician and Floor Inspectors.
  • Perform MSA and GR & R studies, PPAP submissions and update TS 16949 policies, procedures and work instructions.
Candidate Info
24
years in
workforce
13
years
at this job
HS
High School Diploma
AA
Associate of Arts
9

CMM Operator/ Inspection/ Bonding Operator

Received fan blades, spacers, and platforms from various steps in production process to measure, calculate, and confirm or reject tolerances designated from customer.

  • Operated CMM machine to identify any non-conformances and collect data for customer review.
  • Typed up MRR's upon discovery of part defects and passed on documents to Quality Control.
  • Created powerpoint presentations with pictures of any non-conformance and entered presentation into Quality Control database.
  • Finished carbon fiber composite aircraft parts including fan blades, spacers, platforms, and fan cases.
  • Used various adhesives and other bonding agents to attach titanium metal leading edges, wear strips, and fire-protectant materials to parts.
  • Performed deflash operations to remove excess cured adhesives from parts using scalpels, grinders, picks, and other electrical tools.
  • Inspected finished parts using calipers, micrometers, gauges, and scales to meet required tolerant measurements.
Candidate Info
4
years in
workforce
1
year
at this job
Geography
History
History
10

Quality Control CMM Operator/inspector

  • Perform In-Process and Final inspection of machined parts and structures (CMM PC-DIMAS).
  • Verification of product conformance for company and customer requirements.
  • Review manufacturing plans, internal audits, policies, work instructions, quality records, specification drawings, acceptance gages and tooling as stated on the process control plan.
  • Responsible for maintaining computer (SPC) entries of non-conformance.
  • Ensure adherence to the quality control standards and undating the quality assurance data base.
  • Conduct re-inspections to determine acceptability of rework.
Candidate Info
28
years in
workforce
6
years
at this job
C
Mechanical
AA
Machine Tool Technology

Your Resume, Made Easy.

You are looking for your dream job and need a resume? My Perfect Resume is your solution and takes the hassle out of resume writing. Create the perfect job-worthy resume effortlessly in just a few clicks!