Calibration Technician Resume Samples - Page 2

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Calibration Technicians maintain, test and repair a variety of instrumentation and equipment to make sure instruments, gauges, and testing devices are calibrated correctly and give accurate readings. Responsibilities shown on sample resumes in this field include developing and implementing procedures for identification, turn-in, and control of TMDE requiring calibration and repair support; and assisting in gage repeatability and reproducibility studies and determining uncertainty. Example resumes show that a high school diploma or its equivalent is the minimum educational requirement for this position.

For more information on what it takes to be a Calibration Technician, check out our complete Calibration Technician Job Description.

Want 2-3x more interviews (guaranteed)? Get a Professional Resume Rewrite from ZipJob

11

Calibration Technician

Assisted with the planning and scheduling of calibrations in support of move to another facility and performed subsequent validations.

  • Maintained calibration records in a computer database in compliance with FDA's QSR, ISO 9001 and ISO 13485 requirements.
  • Determined the frequency of and performed operational checks, preventative maintenance checks and accuracy verifications of measurement and test equipment used in production and research and development.
  • Trained other technicians/departments on metrology basics.
  • Past Chair of Safety Committee - recognized for leadership in this role. Conducted safety inspections on machines and facilities to ensure safety of employees.
Candidate Info
18
years in
workforce
9
years
at this job
AAS
Automated Systems And Robotics
12

Calibration Technician & Deputy Technical Manager

Performed repair, calibration and certification of electronic Test, Measurement and Diagnostic Equipment (TMDE) to ensure measured parameters were accurate and traceable to the National Institute of Standards and Technology (NIST). Areas of expertise: RF Communications, Telecom and Fiber Optics.

  • Performed A2LA accredited calibrations, to include the building of uncertainty budgets for measurement uncertainty analysis and for support of the laboratories Scope of Accreditation.
  • Created test procedures and data sheets.
  • Provided assistance to other technicians.
  • Effectively communicated with customers in relation to technical matters and SIMCO processes.
  • Quality Assurance signatory for documentation and final inspection.
  • Worked under ISO 9001 and/or ISO 17025 quality assurance programs.
Candidate Info
33
years in
workforce
4
years
at this job
HS
High School Diploma
Air Force Base
13

Calibration Technician

Responsible for troubleshooting, repair and calibration of test measurement and diagnostic equipment (TMDE), including precision measurement equipment laboratory (PMEL) standards and automatic test equipment.

  • Selected to attend a three month Advanced Calibration course
  • Hand selected to work in conjunction with a higher level calibration lab
  • Responsible in the calibration and maintenance of over 700 standard lab assets
  • Recognized as the top technician for calibrated and repaired assets several months
  • Designated as a Section Supervisor to lead and train new Marines in the lab
Candidate Info
6
years in
workforce
6
years
at this job
BS
Computer Science
Intermediate Calibration Physical/dimensional Test And Measuring Systems
14

Calibration Technician

Calibrated, adjusted, and repaired a wide variety of tests, measurement, and diagnostic equipment including, but not limited to modulation/power/digital and analog meters. Digital and real time oscilloscopes, TDR cables testers, low, medium and RF signals generators, frequency counters, radio test sets, and modulation domain analyzers.

  • Calibrated, adjusted and repaired a wide variety of biomedical and medical instruments including but not limited to patient analyzers, ECG analyzers, safety analyzers, blood pressure analyzers, data analyzers, temperature registers, patients simulators, defibrillator analyzers.
  • Calibrated mechanical instruments such as torque wrenches, pneumatic pressure, vacuum and temperature gauges, densitometers and scales.
  • Reviewed technician's documented calibration data for accuracy of standards or substitutions, up to date procedures, and proper written documentation
  • Trouble shot electronic instruments down to component level.
  • Knowledgeable with GIDEP, DOD Midas, MFR calibration procedures. Used calibration software as Lab-Mate and Indi-Soft. .Worked under an ISO17025 system
Candidate Info
23
years in
workforce
5
years
at this job
BS
Telecommunications Engineering
Computers
• Aircraft Electronics Technician / Avionics
15

Calibration Technician

  • Calibrated and maintained an inventory of over 7,000 measuring tools averaging less than two day cycle time.
  • Submitted, monitored and recorded calibration data for measurement tools sent to outside vendors for calibration.
  • Wrote over 200 Fluke MET/CAL automated and semi-automated calibration procedures to provide calibration data, ensure accuracy and procedure repeatability.
  • Wrote over 50 SQL and Crystal Reports queries to report calibration status, costs, and calibration recall information.
Candidate Info
14
years in
workforce
6
years
at this job
C
Computer Information Systems
Electronics Technology
16

Calibration Technician

Performed calibrations in accordance with ISO-17025 both in lab and at customer's locations.

  • Calculate Test Uncertainty Ratios and created budgets
  • Became familiar with the use of GIDEP, Manufacturer's Procedures, as well as internally generated calibration procedures.
  • Used Netsuite as well as various other forms of software for the writing up of equipment.
  • Contacted customer's for specific information regarding the calibration of their equipment as well as helped the company obtain new customers.
Candidate Info
6
years in
workforce
1
year
at this job
HS
High School Diploma
Electrical Engineering
17

Calibration Technician

Calibration Technician responsible for on-site company calibrations for the mechanical, electrical and bioscience environment.

  • Participate in sales calls with sales personnel to obtain new business opportunities when required.
  • Assigned as a permanent on-site calibration technician for a local Massachusetts company.
  • Travel in and out of state to complete on-site calibrations.
  • Current responsibilities include but are not limited to receiving, shipping and calibrating the customer's equipment to meet the customer's expectations and deadlines.
  • Assigned responsibility for ensuring that all in-house standards are up to date.
  • Trained and assisted new personnel on policies and procedures regarding quality for NIST, ISO-9000 and ASQC.
Candidate Info
26
years in
workforce
3
years
at this job
Air Force
18

Calibration Technician

Responsible for planning and executing calibration activities. Kept Calibration Records, used an in-house program called Gagecal. Wrote and audited work instructions (QSI). Provided requested records during ISO, FDA and customer audits.

  • Devised ways to eliminate waste of manufactured product during testing.
  • Reviewed and streamlined calibration to eliminate unnecessary equipment calibrations.
  • Instrumental in renumbering equipment to standardize between departments.
  • Validated Gagecal program used to track and record calibration.
Candidate Info
66
years in
workforce
12
years
at this job
19

Sr. Bench Technician (calibration Technician)

Responsible for biomedical equipment repair including: infusion pumps, syringe pumps, humidifiers.

  • Responsible for performing technical evaluations of proposals for new equipment, to determine cost-effectiveness and suitability to assist with purchase decision making.
  • Trained new hire technicians on repair techniques and procedures of Baxter infusion pumps.
  • Performed calibration and repair on electronic & dimensional test equipment, including electrical safety analyzers, multimeters, thermometers, pressure meters, micrometers, calipers, gauge blocks.
  • Developed calibration procedures for new equipment and acquired reference standards.
Candidate Info
15
years in
workforce
15
years
at this job
HS
Biomedical Equipment Technology

Your Resume, Made Easy.

You are looking for your dream job and need a resume? My Perfect Resume is your solution and takes the hassle out of resume writing. Create the perfect job-worthy resume effortlessly in just a few clicks!