Metallurgist Resume Samples

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Metallurgists are responsible for extracting and processing metals on the field. Typical responsibilities listed on a Metallurgist example resume are separating metals from ore, testing metals, checking metal quality, investigating metallurgical failure in case of accidents or air crashes, writing reports, and designing metal components. Based on our collection of resume samples, Metallurgists should demonstrate expertise in their area, attention to safety, observation spirit, and time management. Holding a Bachelor's Degree in engineering is required.

Looking for job listings? Check out our Metallurgist Jobs page.

Want 2-3x more interviews (guaranteed)? Get a Professional Resume Rewrite from ZipJob

1

Metallurgist, Foundry Engineer, Six Sigma Black Belt

Using AutoCAD and MDT5 in metal part manufacturing tooling design for new and existing product processing.

  • Monitoring daily production to insure the part poured meet customer requirement.
  • Significantly reduced internal scraps from 15% to 3% and eliminated most external scraps caused by original casting defects.
  • Successfully achieved to help in turning company to make-profit operation.
Candidate Info
16
years in
workforce
2
years
at this job
C
Six Sigma Black Belt
BS
Bachelor of Science
MS
Science & Engineering
2

Quality Engineer and Materials Lab Metallurgist

  • Pioneered and oversaw many concurrent projects improving the quality of hydraulic valves, saving the company immeasurable cost
  • Responsible for the oversight of all quality procedures on product lines that accounted for over 60% of the sales at a high-throughput plant
  • Attained certification as the most junior metallurgist approved to evaluate material for use in aerospace applications
  • Earned official recognition within just 3 months of working at Eaton for extraordinary job performance, teamwork, and leadership
Candidate Info
2
years in
workforce
10
months
at this job
BS
Engineering
3

Product Metallurgist / Quality Engineer - USS Gary Works, Hot Rolled Products

Identified and resolved quality issues at the Gary Works 84-inch Hot Strip Mill and reported the results and recommendations to operations and to field engineers.

  • Addressed quality concerns working as a liaison between sales, tech support and mill operations.
  • Collaborated with various cross-functional teams that resulted in the hot-strip mill achieving world record productivity levels while maintaining record low internal rejection rates.
  • Trained in all aspects of quality assurance including SPC, TQM, and 6-Sigma methodologies.
  • Streamlined standard operating procedures according to ISO/QS Guidelines and developed extensive knowledge of specifications and standards (ASTM, ASME, SAE, JIS, ISO, DIN, etc.).
Candidate Info
4
years in
workforce
4
years
at this job
BS
Materials Science And Engineering
MBA
Operations Management And Quality Assurance
4

Metallurgist / Manager of Technology Development / Metal Injection Molding (mim)

Developed alloys for specific customer applications including: 2 custom alloys for high wear automotive applications presently used by 3 auto makers

  • Developed processing capabilities for 5 alloys acceptable for medical implant applications.
  • Developed mathematical model to predict process outputs and improved process controls
  • Developments include compounding of organics and metal powders, injection molding, polymer de-polymerization, vacuum chemistry, high temperature diffusion, alloy development, rheological tests, and furnace design
  • Developed processes for components with annual volumes in excess of 50 million parts per year
  • Designed vacuum system modifications increasing furnace capacity by 700% saving over $50M
Candidate Info
34
years in
workforce
20
years
at this job
BS
Metallurgical Engineering
Business
Material Science And Composites
5

Senior Project Engineer / Plant Metallurgist

Researched and Developed friction materials to make clutch linings for earth-moving equipment.

  • Formulated Powder Metal batches.
  • Tested and Evaluated Final Products for their metallurgical properties.
  • Prepared Heat-Treating and Nitriding Process Specifications.
  • Issued and implemented Process Routing Instructions and Raw Material Specifications.
  • Received corporate Recognition Award.
  • Published "P/M Friction Materials" ASM Metals Handbook" [Edtn. 9, Vol. 7, pp: 701-703].
Candidate Info
7
years in
workforce
7
years
at this job
Metallurgical Engineering
Metallurgical Engineer, Materials Science
6

Metallurgist/quality Manager

Prepared and evaluated microstructural characteristics of metallurgical samples, consisting mainly of carbon and stainless steels, cast iron, aluminum alloys, and some nickel and titanium alloys.

  • Analyzed material chemistries using a LECO Glow Discharge Spectrometer, and also performed mechanical testing using Brinell, Rockwell, and Vickers hardness methods.
  • Evaluated metallurgical samples using a Topcon Scanning Electron Microscope capable of energy-dispersive spectroscopy.
  • Assisted senior metallurgist with failure analysis, as well as independently perform basic failures.
  • Maintained and employed current ASTM revisions, quality manuals, standard procedure, and work instructions.
  • Performed internal audits in addition to participating in A2LA and NADCAP audits.
  • Communicated with customers in order to achieve testing goals and requirements.
Candidate Info
3
years in
workforce
2
years
at this job
BS
Materials Science And Engineering
7

Process Metallurgist/engineer

Worked with an International vendor to successfully commission new technology on the line and assume responsibility for expanding use of the new equipment. Delivered a presentation at the 106th Galvanizers Association Meeting discussing the results of the project.

  • Quality Assurance responsibilities included reviewing non-conforming material and assigning the appropriate disposition.
  • Preformed root cause analysis of defective material to identify problems and modify processing to improve capability.
  • Assisted technical service to resolve customer complaints. Championed reports for the customer detailing corrective actions and implementation to prevent recurrence.
  • Review processing practices and procedures, identifying non-performances and potential improvements to be implemented by the processing line.
Candidate Info
6
years in
workforce
3
years
at this job
BS
Materials Science And Engineering
MS
Materials Science And Engneering
8

Metallurgist

Plan and implement standardized methods to assure that all processes for final strip anneal/pickle operation are performed in a prescribed manner and sequence for 400 type grades of stainless.

  • Responsible for inspection, material disposition, customer visits, claim investigation, and overall quality of ferritic stainless steels used in automotive applications to insure that the product meets the customer's requirements.
  • Played key role in problem solving, reducing operating costs and improving yields.
  • Increased Anneal/Pickle line productivity by 30% and reduced acid waste generation by 20%..
  • Worked directly with Honda and Toyota to qualify AK products and become a certified supplier.
  • Assisted automotive exhaust producing customers with resolving steel defects which caused welding problems.
  • Supervised 2 lab technicians.
  • Also work with cold rolling operation of electrical and stainless steels to improve flatness, gauge control and surface quality.
  • Provide assistance to Engineering Dept. on line upgrades as the designs relate to metallurgical and quality requirements of products.
Candidate Info
8
years in
workforce
6
years
at this job
BS
Materials / Metallurgical Engineering
MBA
Master of Business Administration
9

Metallurgist Technician

Improved efficiency in metallurgical control and release of gears and gear drive systems by streamlining preparation and approval of relevant documentation by 25% more released products through department per day

  • Controlling authority for carbon analysis process and carbon gradient report generation
  • Programmed, maintained, and operated electric discharge machine for metallographic sampling
  • Applied precision machining tools including lathes, band saws, metallographic cut-off saws, micro- hardness analyzers, Rockwell hardness analyzers, and other related precision machining equipment and tools for control and release of gears and gear drive systems
  • Induction hardening specialist
Candidate Info
7
years in
workforce
3
years
at this job
BS
Materials Science And Engineering
10

Corporate Metallurgist

Research and testing for all facilities in the areas of alloy capability and availability.

  • Provided technical assistance and troubleshooting.
  • Managed corporate quality planning.
  • Chaired corporate quarterly quality planning meetings.
  • Maintained Manager, Quality Assurance duties for the Monett/Cassville division.
Candidate Info
16
years in
workforce
4
years
at this job
BS
Metallurgical Engineering

Free Professional Resume Critique

We have partnered with TopResume to bring you a FREE resume critique service. Upload your resume and within 48 hours TopResume will email you a detailed analysis of what hiring managers and automated systems think of your resume – and how to improve it.

Browse
Upload Resume File