Inspection Engineer Resume Samples

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Inspection Engineers identify problems with structures like bridges and roads and share their results with construction teams in an attempt to prevent catastrophes. Sample resumes for this position highlight such skills as verifying isometric drawings, inspecting weld edge preparations as per approved drawings, and witnessing hydro testing, pneumatic tests, flushing and visual tests as per test pack limits. Inspection Engineers need to be able to show a bachelor's degree on their resumes, though the discipline depends on the type of inspection (i.e. Bridge Inspection Engineers need a civil engineering degree, while those in mechanical hardware need a mechanical engineering degree).

Looking for job listings? Check out our Inspection Engineer Jobs page.

Want personalized resume advice? Get a FREE Resume Review

1

Inspection Engineer

Sustaining engineer for repair, automated and manual inspection.

  • Designed Delrin tabs for KLA2XX plate holders to eliminate possible scratches to product.
  • Co-designed and submitted patent for 3"x5" and 4" plate holders for the KLA3XX systems. This enabled manufacturing to inspect plates with greater throughput than using existing KLA2XX systems.
  • Consolidated and reduced documentation in area by 50%.
  • Author and Originator for process area QS-9000 documentation.
  • Maintained a 100% on time delivery each month.
  • Created daily written and weekly oral presentations to area managers and engineering group using Microsoft's Power Point, Excel and Word.
  • Presented monthly area meetings for manufacturing group.
Candidate Info
19
years in
workforce
2
years
at this job
2

Inspection Engineer (qa/qc Inspector)

Provided world class service to the customers in accordance with their specifications.

  • Conducted dimensional inspection using GD&T rules on assembled and sub-assembled products in accordance to blue print specifications such as physical attributes, welding leg length and the allowable tolerances and visual inspections for any surface defects such as cracks, spatters and blow holes using dye penetrant testing on welded area.
  • Performed dry filmed thickness inspection on each finished product before shipped out for delivery and processed documents necessary and transmittal for confirmation that the projects was accomplished on time and in accordance to specifications.
  • Performed Dye Penetrant testing on welded area for surface defects like cracks and blow holes
  • Performed nondestructive testing (Gamma Ray) on welded joint on some various projects like pressure vessels.
  • Conducted hydraulic test (Atmospheric Pressure) on pressurized vessel.
  • Delivered assigned projects on time with top class quality with no issues.
Candidate Info
8
months in
workforce
8
months
at this job
BS
Mechanical Engineering
Mechanical Engineering
Quality & Mechanical Works
3

Energy Inspection Engineer

Performed energy, waste and environmental audits for companies to minimize energy usage and waste products

  • Analyzed utility bill data to determine customer energy performance parameters.
  • Identified and quantified energy conservation opportunities associated with HVAC, EMS, building shell and heating and cooling systems
  • Performed energy savings calculations and developing cost estimates.
  • Recommended energy conservation measures using technical presentations
Candidate Info
5
years in
workforce
1
year
at this job
MS
Mechanical Engineering
4

Senior Specialist, Group Leader, Inspection Engineer

Developed quality standards/product quality plans, coordinated on-line/off-line trials to detect potential fitting/workability issues, and worked directly with the Toyota design team and vendors to review initial design concepts through production. Issued design changes and developed sample parts to confirm effectiveness of proposed design changes. Knowledge with rubber injection molding, stamping and welding.

  • Manage supplier quality through periodic supplier visits and review of supplier process. Reviewed supplier gage concepts and communicated parts quality expectation prior to tooling development.
  • Lead trainer for Faro Arm portable CMM
  • Lead in house process quality level up to improve body accuracy to achieve final shipping requirement.
  • Supervised hourly team members in two groups: Measurement Analysis Group (MAG) and Materials Lab.
  • Responsible for inspection equipment for completed vehicles in Audit Lab, MAG and Materials Lab.
Candidate Info
7
years in
workforce
7
years
at this job
BS
Industrial Technology
5

Inspection Engineer

Perform residual life assessment of power and process boilers by application of NDE techniques such as ultrasonics, radiographic film interpretation, magnetic particles, dye penetrant, hardness measurement, corrosion monitoring using thickness measurement.

  • Perform vendor evaluation and prepared technical reports as regards to facilities and capabilities of vendor to manufacture product that meets or exceeds quality requirement for the Steel project.
  • BS in Engineering with Major in Mechanical Engineering.
  • ISO 9001 RABSQA Certified Lead Auditor.
  • American Welding Society Certified Welding Inspector # 97010861 for 16+ years.
  • American Society for Nondestructive Testing Certified to Level II in Ultrasonics, Radiography, Magnetic Particle and Penetrant testing (expired).
  • Certified Internal Quality Auditor from National Institute of Quality and Reliability.
  • Company certified ISO 9001 Quality Management System Internal Auditor.
Candidate Info
2
years in
workforce
2
years
at this job
6

Inspection Engineer Trainee

  • Manufactured and inspected 3 to 10 ton bottom pouring ladles, bail arms & charging bucket
  • Designed general drawing of individual components of charging bucket
  • Revised 2D modeling of new shape of bail arm and charging bucket
Candidate Info
2
months in
workforce
1
month
at this job
BE
Mechanical Engineering
MS
Mechanical Engineering
7

Assembly & Inspection Engineer

  • Assembled housing and different components including motor, batteries, damping springs, axles onto the chassis through 6 assembly lines.
  • Replaced components with assembly problems and defects, measured and recorded their dimensions and problems.
  • Tested the speed, four wheel orientation, lights, brake of the newly assembled vehicles on designated equipments,monitored the relevant parameters and compared with the desired value.
Candidate Info
2
years in
workforce
2
months
at this job
BA
Mechanical Engineering
MA
Product Design
Mechanical Engineering
8

Line Inspection Engineer

Performed inspection and Quality Control for finished products

  • Participated in designing and projecting new auto parts
  • Designed and programmed new control panels for art storage spaces
  • Renewed humidification systems
  • Worked on energy saving system.
Candidate Info
8
months in
workforce
8
months
at this job
BS
Mechanical Engineering
9

Sterile Product Inspection Engineer

Responsible for troubleshooting, retuning and performing validations (IQ, OQ, PQ) of lyophilized vaccines on the Automation Inspection Machines

  • Supports deviation management through iQN investigations with project retunes to prevent repetitive deviation events
  • Reviews all validation protocols executed on the Automation Inspection Machines for lyophilized vaccines
  • Currently involved in a large scaled shutdown project involving extensive planning and preparation of hardware changes, part replacements, and validating inspection retunes of all lyophilized products
Candidate Info
4
years in
workforce
2
years
at this job
BA
Biology
10

Qa/qc Field Inspection Engineer

Mitigated project risks by pre-planning, understanding scope of supply and defining next steps to mitigate obstacles to success.

  • Created inspection guidance scope for field Quality Control inspectors.
  • Defined quality control reviews and checks on surface wellhead and subsea drilling equipment and tools
  • Oversaw project scope, contract services and adherence to company standards and rules.
Candidate Info
9
years in
workforce
3
years
at this job

Free Professional Resume Critique

We have partnered with TopResume to bring you a FREE resume critique service. Upload your resume and within 48 hours TopResume will email you a detailed analysis of what hiring managers and automated systems think of your resume – and how to improve it.

Browse
Upload Resume File