Equipment Engineer Resume Samples

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Equipment Engineers evaluate, inspect, maintain, design, analyze and improve various types of equipment. Resumes in this field highlight such duties as scheduling preventative maintenance practices for heavy equipment, light vehicles, and generators; developing comprehensive schedules of heavy equipment-planned repair and long-term breakdowns; and performing daily safety and quality assessments of the site. Typically, required education for this position consists of a bachelor's degree in engineering or a related field, as is evidenced by applicants' sample resumes.

Looking for job listings? Check out our Equipment Engineer Jobs page.

Want personalized resume advice? Get a FREE Resume Review

1

Sr. EQUIPMENT ENGINEER

Responsible for implementing dicing equipment for isolating miniSMD devices including selection, purchasing, installation and operator training. Specified and installed custom-made shear isolation equipment with vision system. Designed and implemented new snapping isolation equipment.

  • Reduced cost by 30%, increased capacity by 6X, and reduced cycle time 50% by successfully implementing new state of the art dicing equipment.
  • Doubled throughput of diced part removal by designing and installing custom fixtures at 50% of the cost of a commercial machine.
  • Reduced dicing blade cost by $60,000/yr by implementing new "reconditioning process" over purchasing new blades.
  • Reduced cost by 30% and improved material utilization 35% by installing a custom made shear to isolate parts from larger panels.
  • Introduced, designed and implemented 5 new "snapping", "isolation machines" for the smallest miniSMD brought to manufacturing.
Candidate Info
18
years in
workforce
7
years
at this job
BS
Mechanical Engineering
2

Metrology/photolithography Equipment Engineer

Diagnosed and resolved system hardware and software issues to increase system uptime.

  • Participated in team evaluating new pumps for TEL Tracks which reduced resist waste, thereby saving over $1,000,000 in annual costs.
  • Revised maintenance schedules and instituted training resulting in reduction of overall downtime by 5%.
  • Led department FMEA project which resulted in less repeat system failures for entire department.
  • Implemented full technician training program and wrote maintenance documents resulting in complete self sufficiency on responsible inspection systems reducing department contract costs by ~$400,000 annually.
  • Instituted program to sell unusable system parts to third-party refurbishment companies generating over $160,000 in unrealized revenue.
  • Participated in Project Management teams to develop plans, designs, specifications, and cost estimates between vendor and customer for installation of new equipment into the factory environment.
Candidate Info
37
years in
workforce
5
years
at this job
BS
Electronics Engineering Technology
3

Equipment Engineer

Responsible for the maintenance and repair of Photolithography and Metrology equipment.

  • Provided technical leadership to technicians and worked closely with process engineering to resolve problems.
  • Troubleshot and repaired equipment reducing down time 15%.
  • Developed training procedures and certified technicians that resulted in uniform processes and procedures which reduced the average preventative maintenance time from 12 to 6 hours.
  • Initiated and developed tool database which provided specific/critical tool information which resulted in reducing informational retrieval time.
  • Initiated and championed a network solution for CD-line width and registration metrology tools which enabled all recipes to be tool independent. This reduced downtime and eliminated redundant wafer recipes.
Candidate Info
5
years in
workforce
5
years
at this job
AS
Electronics Engineering
BS
Management And Information Technology
Planning
4

Equipment Engineer

Technically supported new store openings through the selection, development and use of new equipment and by training store personnel in the effective and efficient use of the equipment. This effort helped ensure operational quality and on-time operations startup.

  • Developed specifications for a high volume, five flavor chocolate machine. Selected and managed two vendors through final design and production of five prototype machines that are currently being Alpha field-tested.
  • Member of a team that designed and developed a new weight driven coffee grinder. New grinder reduced coffee cost and significantly improved product quality.
  • Helped a franchisee that was losing a significant amount of winter sales due to store location.
  • Designed and developed a new napkin and box dispenser. New dispenser significantly improved employee productivity and efficiency.
  • Worked with a vendor to debug and modify a newly designed sugar dispenser. New dispenser is more sanitary and reduced sugar and artificial flavor consumption by 25%.
  • Designed and modified high quality food service equipment per customer specifications.
  • Prepared Bills of Materials, Routings and release jobs to manufacturing.
Candidate Info
18
years in
workforce
7
years
at this job
BS
Mechanical Engineering Technology
5

Equipment Engineer

Performed project management and project design for tire curing department including waste reduction and quality product appearance. This involved monitoring initial production runs, making adjustments in press settings and attacking high waste molds with detailed troubleshooting techniques reducing waste by 10% and improving productivity, efficiency, and quality.

  • Analyzed extrusion process to ensure rubber flow would not negatively impact waste. Worked with compounders to verify rubber properties.
  • Supervised 4 mold machinists to inspect and repair all damaged equipment. Coordinated shipment of non-repairable molds to 5-6 selected vendors for further work.
  • Managed monthly mold budget for $50K+. Balanced repair of several high waste molds with purchase of new materials and equipment to ensure production was not slowed, while remaining under budget.
Candidate Info
17
years in
workforce
3
years
at this job
BS
Mechanical Engineering
6

Senior Equipment Engineer

Engineered and drove continuous improvement projects on Hitachi Metal and Poly Etch systems within a high volume manufacturing environment.

  • Duties included equipment installation, qualification, and technology transfer using copy exact philosophies.
  • Defined numerous cost reduction and 2nd sourcing activities resulting in over $5 million in cross factory savings.
  • Resolved defect performance issues through manipulation of Voltage Peak to Peak levels on a Microwave/RF etch system resulting in 1 die per wafer of increased yield
  • Extended times between preventive maintenance activities through introduction of an improved Oring material resulting in a 2% availability improvement
Candidate Info
6
years in
workforce
4
years
at this job
BS
Electronics Engineering Technology
Renewable Energy Engineering
7

Equipment Engineer

Designed system upgrades to improve system performance and reliability.

  • Trained 8 technicians to maintain and repair ASML Steppers
  • Reduced equipment maintenance contract cost by 40%.
  • Served as 2nd line support for maintenance and repair of production equipment.
  • Led Kaizen teams to improve equipment interface and performance
  • Implemented Lean manufacturing practices and Six sigma improvements to production equipment and production areas
  • Designed and implemented system upgrades for CVD equipment
Candidate Info
16
years in
workforce
1
year
at this job
BS
Electronics Engineering Technology
8

System Equipment Engineer III

Managed all phases of network design and implementation projects from conception through delivery. Handled a broad scope of responsibilities, including upgrading, downgrading sonnet rings, network troubleshooting, client relations, team leadership, project planning and delivery and documentation preparation. Worked closely with project teams to ensure all tasks were completed according to established specifications, schedule and budgetary constraints.

  • Designed and implemented T0, T1, E1, T3, Optical and GIG-E Ethernet circuits, Sonnet and DWDM rings.
  • Designated as a nationwide coverage specialist responsible for supporting AT&T metro city operations and provisioning center for engineering issues and troubleshooting.
  • Provided oversight of the technical documentation process to support the management team.
  • Served in a leadership role, providing training and support for team members in design and implementation, provisioning and database applications; helped significantly increase overall quality and performance.
  • Worked on special/expedited network design projects and client escalations, ensuring the timely and quality delivery of all project deliverables.
Candidate Info
15
years in
workforce
12
years
at this job
BA
Engineering Science (concentration: Electrical Engineering)
9

Equipment Engineer II

Worked closely on the installation of [company name] Mirra 3400 CMP polishers at Fortune 500 client. Served as Active Liaison between [company name] Corporate support, Fortune 500 client's equipment engineering technicians and their engineering group with installation, design modifications, preventative and operative maintenance which required an aggressive training agenda, Electrical and Mechanical troubleshooting skills, field documentation of tool operation and strong customer relations skills.

  • Participated as lead contributor on the Installation and start-up of 8 Mira 3400 polishers
  • Initiated and led installation of HSS (Highly Selective Slurry, TI Proprietary) Safety retrofits, requiring coordination between install teams, vendors and the customer in order to meet tight timelines and Scheduled completion
  • Discovered, documented manufacturing flaws in slurry drawer design and plumbing and implemented immediate field changes to correct design and ensure fail-safe, correct operation
  • Elected Safety Champion for CMP for Fortune 500 client's site. Worked on safety retrofits, modifications and design issues that placed any personnel in harms way or violated safe work practices
  • Certified as instructor for L.O.T.O. and respirator certification including annual renewals
Candidate Info
9
years in
workforce
3
years
at this job
AS
Biological Sciences, Mathematics, And Pre-med
AS
Electronics
BA
Bachelor of Arts
10

Network Equipment Engineer/senior Engineer

Implemented strategy to provide the best system design to accommodate network changes

  • Supervised switch technicians during switch cuts and BSC migration projects resulting in successful complete projects and technicians able to take the next career step
  • Mentored junior engineers and increase their responsibility levels as knowledge base increases
  • Managed project implementation and equipment maintenance schedules
  • Assigned switch metrics and capacity measurements for equipment tracking to maximize equipment utilization within budget limitations
  • Coordinate major projects with vendors and local operations within a time line and staying within a budget to ensure timely execution of projects
  • Trained technicians during new market launch on task related to site turn-up (T-1 testing, DS0 DACCS connections, physical connections, data fill management, and bandwidth size)
Candidate Info
17
years in
workforce
6
years
at this job
BS
Information Technology
Communications Analyzer

Free Professional Resume Critique

We have partnered with TopResume to bring you a FREE resume critique service. Upload your resume and within 48 hours TopResume will email you a detailed analysis of what hiring managers and automated systems think of your resume – and how to improve it.

Browse
Upload Resume File