Engineering Technologist Resume Samples

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Engineering Technologists turn engineering developments into products that can be sold to customers. Sample resumes in this field indicate duties such as determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods; preparing documentation for new manufacturing processes or engineering procedures; and applying continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness. Applicants should be able to show an associate's degree in mechanical engineering technology or a bachelor's in mechanical engineering technology on their resumes.

Looking for job listings? Check out our Engineering Technologist Jobs page.

Want personalized resume advice? Get a FREE Resume Review

1

Sr. Engineering Technologist

Developed, designed test software, hardware for various types of automatic and manual test equipment used in the manufacturing of Boeing avionics products. Designed and prototyped special test equipment. Provided leadership for all testing aspects. Technical guidance and coordinated the work to other Test Engineering Technologists. Validated test software and hardware. Performed quality configuration management of test software and hardware compliance per Regulation standards.

  • DITMCO test outsourcing focal and transition activities to other US and Mexico sites. Save company millions of dollars.
  • Analyzed, budgeted, procured and implemented test equipment requirements.
  • Installed and trained new test system for Technicians in U.S and Mexico.
  • Led Continuous Quality Improvement teams, Lean 6 Sigma. Recently, led a team of Test Engineering to reduce test waste and saved company over 350,000.00 dollars.
  • Performed audit of all phases of product to verify conformity to regulation requirements.
  • Worked with vendors, other departments to improve Test Yield and quality of products.
Candidate Info
28
years in
workforce
20
years
at this job
AS
Electronics: Testing, Assembling
2

Civil Engineering Technologist

Charged with management of $2 million road widening project that was part of Skidaway Road Insect
Improvement. Maintained direct oversight of all facets of construction activity.

  • Ensured accuracy of payroll in incorporating checks & balances system among contractors.
  • Provided thorough monthly payroll reports for payment transmittal to contractors.
  • Served as head of roadway construction, completing project prior to deadline and under prescribed budget.
Candidate Info
1
year in
workforce
1
year
at this job
BS
Civil Engineering Technology
MA
Master of Arts
3

Engineering Technologist

Designed and drafted electrical systems including lighting, power, and basic communications and fire alarm layouts.

  • Designed and drafted mechanical systems for commercial and medical facilities including plumbing, HVAC systems, propane and natural gas, and medical gas systems.
  • Developed written specifications for governments and commercial design projects.
  • Developed cost estimating spreadsheets to more effectively take-off and estimate plumbing, mechanical, and electrical costs for Commonwealth of Kentucky design submittals.
  • Assisted with energy simulations of various state campuses and developed a detailed report recommending adjustments to energy bill allocation factors
  • Determined building heating and cooling loads based on building envelope and internal personnel and equipment sources.
Candidate Info
21
years in
workforce
2
years
at this job
Nuclear
4

Engineering Technologist

Characterized the performance and behavior of different technologies used in color laser printers.

  • Conducted bench testing to define the operating window of system components across a range of design tolerances
  • Characterized the print quality of samples generated on test equipment
  • Designed and built test fixtures
  • Improved existing calibration procedures used for image analysis
  • Developed script to automate the image analysis process
Candidate Info
18
years in
workforce
1
year
at this job
HS
High School Diploma
Graphic Design
Plumbing Apprenticeship
5

Engineering Technologist Advanced Engineering Center

Lead Experimental ( FEMA ) Finite Element Modal Analysis for ( PT ) Power Train testing, trouble shooting, structure design modification and design verification.

  • Performed system and component tests for ( FEA ) Finite Element Analysis 3-D modeling correlations with updates contributing to warranty or design flaw cost avoidance.
  • Conducted windowing, mass-damping, prototype test piece set ups for structure free-free state conditions and other techniques dealing with rigid body modes for high quality (FRF) Frequency Response Functions for data acquisition.
  • Initiated the build of high accuracy test wireframes using Hyper-mesh (FEA) preprocess software increasing engineering productivity.
  • Managed vehicle power train system modal test for trouble shooting to unveil difficult product issues.
  • Performed ( MA ) Modal Analysis tests with either an impact hammer and or a multi-shaker excitation employing Leuven Measurement Systems CADA-X and test lab software.
  • Participated and contributed to the resolution of pressure sensor design flaws.
Candidate Info
42
years in
workforce
3
years
at this job
BBA
Bachelor of Business Administration
Automotive Technology
6

Engineering Technologist

Learned the basics of industrial controls and electronics and how their functionality and reliability could be improved in the field while insuring the safety of personnel and equipment

  • Assisted team leader in production of 12 safety, normal operation, maintenance, and calibration procedures for new systems installed at oil refining sites
  • Created and implemented sectional and divisional Records Management plan to correctly save and store classified documents
  • Assisted team leader in development and testing of new wire cut over tool and procedures to allow systems to be transferred from old equipment to new without fully shutting down any entire production system
Candidate Info
6
years in
workforce
1
year
at this job
BS
Electrical Engineering Technology
Electronics
Aviation Ordinance Handling
7

Engineering Technologist

Manually assembled printed Wiring Boards from schematic diagrams including soldering and PCB assembly of surface mount components

  • Performed electrical, mechanical, optical, software performance testing on assembled systems using electronic test equipment including oscilloscopes and digital multi-meters
  • Assembled cable harnesses from electrical wiring diagrams
  • Organized electronics lab: Binning of components and organized project inventory
  • Learned in-depth about installation, repair, and maintaining electrical equipments with their internal design and circuit diagram
  • Assisted senior engineers and learned many new concepts of electronics fields while utilizing CAD software such as AutoCAD, ProEngineer and Solidworks
Candidate Info
8
years in
workforce
1
year
at this job
AS
Computer And Electronics Engineering Technology
8

Engineering Technologist

Provided Technical support to NAVSEA engineers and various Contractor throughout the Team Sub program office.

  • Draft NAVSEA responses to Electric Boat based on technical comments provided, and route the completed packages for concurrence, ensuring that all packages have all Objective Quality Evidence (OQE) with them and that all technical comments are adjudicated or properly incorporated into the NAVSEA response.
  • Initiated, tracked, and maintained Valves, Pumps and Motors portion on the VA Class Life Cycle Maintenance review.
  • Evaluate and interpret Submarine schematics, blueprints, technical manuals, and computer aided diagnostics
  • Extensively utilize all forms of Microsoft Office on a daily basis.
  • Actively design visual drawings of auxiliary submarine systems.
Candidate Info
12
years in
workforce
2
years
at this job
BS
Visual Programming
9

Wireless Engineering Technologist

Supported the US Department of Justice through the direct configuration and maintenance of regional P25 trunked radio system sites for networks enabling two-way radio communications.

  • Served as a cleared professional, receiving a top secret clearance from the US Department of Justice.
  • Oversaw the contributions of subcontractors with responsibilities related to remote RF site maintenance.
  • Recognized as the site leader for a major, high-impact P25 system upgrade project, monitoring and reporting progress while ensuring on-time completion.
  • Directed the T1 upgrade and configuration of circuits, modems, routers, switches, and other equipment.
  • Managed relations with the multiprotocol label switching (MPLS) telecom service provider.
  • Tested, troubleshot, repaired, and maintained a wide variety of routers, switches, modems and other mission-critical equipment.
  • Monitored the RF subsystem, using IP network tools to identify, troubleshoot, and repair faults.
  • Ensured the integrity of the RF system by configuring and maintaining relevant CPU console interfaces.
Candidate Info
27
years in
workforce
1
year
at this job
AAS
Electronics
10

Engineering Technologist/engineering Associate

Principal Manager of a classified Systems Integration Lab with a $1.5 million annual budget for programs such as AC-130 Situational Awareness Sustainment, and Mission Computer Replacement. Duties include the design and development of avionics test equipment such as the SAS/Link-16 system tester and MCRP SIL, defining test procedures, writing test reports, developing technical documentation, and overseeing all day to day SIL activities such engineering support, personnel training, security, logistics, and repairs.

  • As the Aerospace Solutions ISSM for Fort Walton Beach and Crestview classified programs consulted, provided support and documentation for multiple Information Systems Security programs such as KF-16, Proposals, and SAS.
  • Stood-up and Certified five stand-alone Information Systems, and created the SOP for one special purpose/weapons platform system.
  • Implemented and managed Repair Department processing 200 to 400 units annually.
  • Responsible for integrating and managing new software/hardware packages used on customer systems.
  • Provides oversight of resources; both DoD and other contractors supporting testing operations off and on board military aircraft.
  • Develop test and support equipment recommendations to upper management for acquisition for the purpose of enhancement and streamlining of testing activities.
Candidate Info
27
years in
workforce
8
years
at this job
AA
Business Administration
BS
Information Technology Software Engineering

Upload Your Resume for a Free Critique

  • Get personalized feedback on improving your resume to land more interviews.
  • See how you resume performs in automated scanners most employers use.
  • Delivered in 48 hours
In partnership with
Browse
Upload Resume File
Privacy Protected