Calibration Engineer Resume Samples

HIGH QUALITY

The best examples from thousands of real-world resumes

EXPERT APPROVED

Handpicked by resume experts based on rigorous standards

DIVERSE EXAMPLES

Tailored for various backgrounds and experience levels

Calibration Engineers are in charge of calibrating engine controls in order to improve performance and lower emission levels. Other duties listed on a Calibration Engineer resume are testing engines, handling pre calibration processes, collaborating with other departments, documenting procedures, and training technicians. Based on our collection of resume samples, essential qualifications include good vision, accuracy, manual dexterity, good math skills, communication, and problem solving orientation. Most candidates hold a Bachelor's Degree in an automotive-related field.

Looking for job listings? Check out our Calibration Engineer Jobs page.

Want 2-3x more interviews (guaranteed)? Get a Professional Resume Rewrite from ZipJob

1

Calibration Engineer

Dedicated to advancing science and medicine to help people live better lives, the company is focused on the areas of infectious diseases, cancer, and inflammatory diseases.

  • Employed as company's sole instrumentation technician from the startup of the facility through FDA licensure, product launch, and routine manufacturing.
  • Implemented and maintained the calibration program for the facility, including scheduling and performing all in-house calibrations, equipment / instrument repair & troubleshooting.
  • Authored and Revised SOPs and Deviations as necessary. Performed investigations and wrote associated reports.
  • Assisted the Maintenance and Validation departments with various tasks, including the Building Automation System (BAS) upgrade installation and Validation.
  • Blue Mountain Calibration Manager Calibration Software Administrator responsible for all functions of the database ad report creation / generation.
  • Assisted in the implementation of PM2 maintenance software
Candidate Info
7
years in
workforce
5
years
at this job
AS
Technology
BS
Management
2

Calibration Engineer

Engines Research and Development - Research and Development of engines using a self-construction/fabrication, custom built dynamometer, fully automated - auto-load and auto-throttle -, 20 digital and analog active channels and 36 more available for future expansions, capable of doing several different tests/runs, such as Break-in, Sweep Tests, Clone Tests (using race track data), etc. R&D done in both scenarios - bench tests (dynamometer) and track tests, with data validation, generation of a complete database, including local weather conditions for future replication of results.

  • Data Analysis - Telemetry analysis, competitors' behavior and statistics, and coaching with the usage of data acquisition systems, professional weather stations, and other tools. Track tests of different car/kart setup, equipment, and components. International experience - UK, Spain, France, Italy, UAE, and USA. Professional Races promoted by the highest authorities in International Motorsports, including FIA races.
  • CFD & FEA in Racing Engineering Applications - Cars aerodynamics and balance analysis - front and rear down forces, rake, heights. Determination of springs and dampers systems from computer models. Heat transfer analysis and designs and/or relocation of new or existing heat exchangers - cooling and heating systems. Internal Combustion engines models having as inputs weather conditions, fuel blend, etc., for the purpose of engine re-mapping.
  • Solar Powered, High Flow and Pressure Water Pump System - Design, fabrication, assembly, and tests of a new system to pump high volume of water from deep well utilizing solar energy, dc motor, and ac generator, able to power a 5hp water pump in remote areas without the need of Inverters. System is all mechanically controlled, without the uses of electronic controllers. DC motor mapped running from 12 to 72 volts, using an adapted Internal Combustion Engine Dynamometer.
  • Fuel Consumption, Emissions Reductions, and Performance Analysis in Engines Using Pre-Combustion Technologies and Alternative Fuels - Study/Research of methods to reduce the fuel consumption, performance, and emissions from Diesel engines and combustion systems using new pre-combustion technologies (Fuel Catalyst, EnergyCel) and alternative fuels (Biodiesel). 2Nd place Award at 2010 FAU Research Day Presentation
  • Hybrid Remote Controlled Lawn Mower - In collaboration with computer science and electrical engineering professionals, completed this 2-semester project. Designed and constructed the entire car body, including gearboxes, calculated loads, motor requirements, and mechanical designs.
  • Electronic Motorized Rollup Shutter Systems - Participated in this project, designed to deliver remote-control shutter solutions to combat hurricanes, on behalf of the company AAA Shutters. Selected the appropriate motors and assembled all component parts. Designed and chose the equipment, including motors and material mechanisms.
Candidate Info
6
years in
workforce
6
years
at this job
AA
Mechanical Engineering
BS
Mechanical Engineering
MS
Mechanical Engineering
3

Electronic Limited Slip Differential Lead Calibration Engineer

Directed Calibration, Development and Testing of Electronic Limited Slip Differential project. Interpreted and executed program team strategies for vehicle dynamics control in relation to ELSD capability. Managed relationship between EBCM supplier to ensure smooth flow of communication between ELSD and Brake Control System execution.

  • Functioned as initial calibrator for the first implementation of ELSD using GM internal software engineering.
  • Developed comprehensive calibration guide as a resource for referencing all calibrations and their uses.
  • Created complete ELSD calibrations with specific vehicle requirements for three different program teams (Corvette, Cadillac, and full size truck).
  • Identified required software improvements and provided information to Software Strategist.
Candidate Info
13
years in
workforce
2
years
at this job
BS
Material Science Engineering
MS
Mechanical Engineering
4

Test & Calibration Engineer

Troubleshooting and bench level testing of components, analog and digital circuits, developing innovative solutions and new designs that improve the efficiency of the overall products. Testing various products boards with proven test procedure and developing new test procedure.

  • Testing Methodologies: Resulted in increase of defect free products, which assisted in generation of estimated revenue of 26 million in year 2004.
  • Great accomplishment of developing new test procedures, tracking test results, recording checklists, GDP, cGMP, develop master validation plan, and conducting process validation protocol (IQ, OQ, PQ) tests for AED10, 20 and PIC products.
  • Part of a team member to respond FDA audit and provide quality assurance testing of recall product
  • AED 10, AED20 motherboards, defibrillator board, pre-Amp boards, PIC motherboard, power supply board, blood Pressure board, pumps for PIC product, 3 leads, and 12 leads boards.
  • Applying technical skills to troubleshoot text fixtures, developing new text fixtures, testing equipment and components, which lead to improvement of quality, 0% rejection ratio, and certified-tested boards.
  • Firm understanding of FDA's Quality System Regulation.
Candidate Info
4
years in
workforce
3
years
at this job
AAS
Electronics & Telecommunication
BS
Electronics & Telecommunication
5

Calibration Engineer

Calibrated sound and acoustic equipment such as SLMs, sound calibrators, condenser microphones, and pre-amplifiers using established calibration procedures in a fully accredited calibration laboratory setting.

  • Calibrated vibration equipment such as accelerometers using calibration procedures.
  • Acted as a customer service point of contact for calibration customers, answering any questions they may have regarding the calibration process, use of equipment, or the status of any calibration orders.
  • Worked independently researching specifications for unknown or unfamiliar equipment in order to develop accredited procedures for said equipment, additionally utilizing extensive mathematical knowledge to calculate uncertainties for such procedures.
  • Prepared for and participated in yearly ANSI accreditation audits, as well as conducted and assisted with several periodic in house quality assurance audits.
Candidate Info
8
years in
workforce
1
year
at this job
BA
Liberal Arts / Life Sciences
6

Calibration Engineer

  • Created and implemented processes and procedures for product assembly, configuration, maintenance, and calibration in accordance with NAV-AIR, NAV-SEA, MIL-SPEC, MIL-STD, GIDEP, ISO, and NIST traceability and qualitative standards.
  • Calibrated physical, mechanical, and electronic test equipment within extremely close tolerances in temperature controlled environments.
  • Conducted test and inspection of incoming materials to determine the quality of performance prior to acceptance.
  • Accurately collected, complied, measured, recorded and summarized data during calibration processes, identified out of tolerance conditions and performed corrective actions via adjustments or component replacement.
  • Performed uncertainty evaluation and analysis for measurement standards and associated measurement processes.
  • Evaluated and made recommendations regarding new calibration standards, methods, processes, practices and procedures.
Candidate Info
6
years in
workforce
2
years
at this job
BS
Business Management Bs / Bm
MBA
Global Management
7

Test and Calibration Engineer

Updated and redlined test and calibration procedures for Atmospheric and Vacuum robots

  • Trained Robot stations and Pre-aligners, installed and aligned Robots, Sensors and End Effectors
  • Assured high production quality according to manufacturer specifications and customer requirements
  • Diagnosed and troubleshoot of RMA robot systems, performed failure analysis for failed subassemblies and components, provided corrective POA
Candidate Info
13
years in
workforce
1
month
at this job
BS
Electrical Engineering
8

Test and Calibration Engineer

Updated and redlined test and calibration procedures for Atmospheric and Vacuum robots

  • Trained Robot stations and Pre-aligners, installed and aligned Robots, Sensors and End Effectors
  • Assured high production quality according to manufacturer specifications and customer requirements
  • Diagnosed and troubleshoot of RMA robot systems, performed failure analysis for failed subassemblies and components, provided corrective POA
Candidate Info
13
years in
workforce
1
month
at this job
BS
Electrical Engineering
9

Transmission Calibration Engineer

Conducted cradle to grave calibration and verification of core features for the 2008 and 2009 6 speed transmissions.

  • Calibrated entire shift schedules and lock-up schedules for a proposed "economy mode and made measurable gains on the FTP city cycle.
  • Conducted in-vehicle calibration of up-shifts and down-shifts using single clutch control, clutch-to-clutch control and "double-swap" control.
  • Specified calibrations for solenoid duty cycles, fill volumes and release timing for shifting clutches and torque convertor lock-up clutches.
  • Worked in a team environment with engine calibrators to improve interactive features like coast-downs, shift-torque management, cruise control, grade-hunting, over-heat strategy, etc.
  • Conducted DFMEAs for the 62TE and the 41TE logic in a diverse team environment and assisted in writing and executing DVP&Rs.
  • Provided training and support to new calibrators with basic tasks and assignments and assisted with instrumentation set-up, testing, data collection and analysis.
  • Participated in development trips for hot weather testing, altitude testing, grade hunting calibration, trailer tow testing and more.
  • Proficient in engineering tools such as Hardware-In-Loop, ETAS, INCA, Powercal, DCPlot, FAMOS, Turbolab, IBOXs and other diagnostic tools.
Candidate Info
3
years in
workforce
3
years
at this job
BA
Mechanical Engineering
MA
Automotive Engineering
10

Product Development/calibration Engineer

Provided manufacturing and quality control support via poke yoke assembly specifications and process sheet construction. Responsible for powerpack/propulsion layout, end of line programming, fuel systems, towers, trailers and shipping. Conducted wakeboard and waterski testing for hull/pump/ballast/ski mode development and improvements.

  • Responsible for complete engine calibrations, compliance and validation for MY04-07 SeaDoo PWC's
  • Production support for powerpack assembly line and sub-assemblies and quality control.
  • Specialized in CARB compliant fuel systems and powerpack layouts for MY08-12 SeaDoo Jetboats.
  • Oversaw pilot run activities and worked close with QA to ensure a problem free production startup.
  • Developed, validated and verified compliance with latest CARB, EPA, ABYC and Coast Guard requirements related to fuel systems, exhaust emissions and J1939 OBD-M calibrations.
Candidate Info
13
years in
workforce
8
years
at this job
MS
Mechanical Engineering-materials Science

Free Professional Resume Critique

We have partnered with TopResume to bring you a FREE resume critique service. Upload your resume and within 48 hours TopResume will email you a detailed analysis of what hiring managers and automated systems think of your resume – and how to improve it.

Browse
Upload Resume File